Hi Ted,
As requested:
Rosegarden 20.06 - AlsaDriver [ALSA library version 1.2.2, module version
5.11.0-7620-generic, kernel version 5.11.0-7620-generic]
===============================================================
JackDriver::initialise() begin...
JACK sample rate = 88200Hz, buffer size = 2048
Creating audio file thread...
Found 1 JACK physical outputs
connecting from "rosegarden:master out L" to "a2j:Midi Through [14]
(playback): Midi Through Port-0"
WARNING: cannot connect to JACK output port
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype
655362, cap 99]
128,0 - (FLUID Synth (47987), Synth input port (47987:0)) (WRITE
ONLY) [ctype 1, ptype 1310726, cap 66]
Using low-resolution system timer, sending a warning
Current timer set to "system timer"
WARNING: using system timer with only 250Hz resolution!
AlsaDriver::initialiseMidi - initialised MIDI subsystem
AlsaDriver::setPlausibleConnection: connection like "" requested for device 0
AlsaDriver::setPlausibleConnection: fuzzy match 128:0 Synth input port
(47987:0) (write) available with fitness 1
AlsaDriver::setPlausibleConnection: connection like "" requested for device 1
AlsaDriver::setPlausibleConnection: nothing suitable available
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype
655362, cap 99]
128,0 - (FLUID Synth (47987), Synth input port (47987:0)) (WRITE
ONLY) [ctype 1, ptype 1310726, cap 66]
AlsaDriver::setPlausibleConnection: connection like "20:0 UMC1820 MIDI 1
(duplex)" requested for device 0
AlsaDriver::setPlausibleConnection: nothing suitable available
AlsaDriver::setPlausibleConnection: connection like "20:0 UMC1820 MIDI 1
(duplex)" requested for device 1
AlsaDriver::setPlausibleConnection: nothing suitable available
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype
655362, cap 99]
128,0 - (FLUID Synth (47987), Synth input port (47987:0)) (WRITE
ONLY) [ctype 1, ptype 1310726, cap 66]
AlsaDriver::setPlausibleConnection: connection like "" requested for device 0
AlsaDriver::setPlausibleConnection: fuzzy match 128:0 Synth input port
(47987:0) (write) available with fitness 1
AlsaDriver::setPlausibleConnection: connection like "" requested for device 1
AlsaDriver::setPlausibleConnection: nothing suitable available
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype
655362, cap 99]
128,0 - (FLUID Synth (47987), Synth input port (47987:0)) (WRITE
ONLY) [ctype 1, ptype 1310726, cap 66]
Using low-resolution system timer, sending a warning
Current timer set to "system timer"
WARNING: using system timer with only 250Hz resolution!
Using low-resolution system timer, sending a warning
Current timer set to "system timer"
WARNING: using system timer with only 250Hz resolution!
Using low-resolution system timer, sending a warning
Current timer set to "system timer"
WARNING: using system timer with only 250Hz resolution!
> For troubleshooting JACK issues, there is a log viewer in
> preferences. Go to Edit > Preferences... > Details...
>
> That will display the log viewer. See if there's anything
> interesting there. If needed, copy and paste and email it to the list
> and we'll look further.
>
> Ted.
>
> On 7/15/23 12:25 AM, [email protected] wrote:
>> Hi guys,
>>
>> I'm getting the following error message when I try to activate recording
>> on an audio track:
>>
>> "audio subsystem not available - can't record audio"
>>
>> in a window that has the header:
>>
>> Rosegarden (as superuser)
>>
>> This is happening with Rosegarden Version 23.06 "Flutterbye"
>> Build Key 13280f9033
>> Qt Version 5.15.9
>>
>> Running under Pop!_OS 20.10 Linux with
>> QjackCtl Version 0.5.0
>> Qsynth Version 0.6.3
>> Using FluidSynth 2.1.3
>>
>> QjackCtl and Qsynth are working and sound fine. Qsynth's audio outputs
>> show up on QjackCtl's patchbay but no audio inputs to Rosegarden appear.
>> All the MIDI ins and outs seem to be working fine.
>>
>> The "self-recording" feature of Rosegarden used to work. Is this a bug?
>> Is there a workaround? I used to use it to record (with perfect
>> synchronization) track by track, and sometimes double track, various
>> patches and synths.
>>
>> Thanks for all you do, and in advance,
>>
>> [email protected]
>>
>>
>>
>>
>> _______________________________________________
>> Rosegarden-user mailing list
>> Rosegarden-user-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org - use the link below to
>> unsubscribe
>> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
>
>
> _______________________________________________
> Rosegarden-user mailing list
> Rosegarden-user-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org - use the link below to unsubscribe
> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.