Re: MIDI Instrument creation script

Hello again,

I tried the txt2rgb script with your values and I got the same error

that you did. I don't know why this is happening but I suggest

you build your device file with MSB and LSB values set to 0

and then edit the correct values in (they only occur at the top of the list)

either using the GUI editor in Rosegarden or by un-gzipping the rgb

file and doing it by hand and gzipping again. Use the editing as an 
opportunity to

input the device name and librarian values.

Regards.


On 07/01/2024 3:20 pm, Olivier S. wrote:
> Hello, Best whishes to you all, No one has got an idea or did I wrote 
> to the wrong mailing list ? Thanks Le 29/12/2023 à 19:17, Olivier S. a 
> écrit : Hello list ! I am a newcomer here, new to Rosegarde
> *DuckDuckGo* did not detect any trackers. More 
> <https://duckduckgo.com/email/report#RFVDSzI.G5gBIIzEOCbxRlHEQWatqezP6gKgUJ2qB7rcAycFLBado3OMz5pWa5xF2tGGsyh9wxVwqpuIA7zEr2WlwVv_fSFUKmJElSePhFjmg6jYRYWf5JQOwOgWIozvYZaTWkTEquAhEwTSbRILfv8AAR0G7uVPB0NSF1c0QKIUSe0XoDDNVIj3nuq-9geBGo7QDCqVFJnqcKJmNObcJPPGeDpWcx2M8Ic8kdu1TJaczuqpqbT70oGk1BVHxFMmUF3cqi5XQvy4bN-FeNMyrNJYXextW7VxHt7ZVtvKrNb3gMDGKgH1BGjawF1IfC5DfgeBJW7vDw> 
>
> Unable to verify sender identity
>
> Report Spam 
> <https://duckduckgo.com/email/report-spam#RFVDSzI.G5gBIIzEOCbxRlHEQWatqezP6gKgUJ2qB7rcAycFLBado3OMz5pWa5xF2tGGsyh9wxVwqpuIA7zEr2WlwVv_fSFUKmJElSePhFjmg6jYRYWf5JQOwOgWIozvYZaTWkTEquAhEwTSbRILfv8AAR0G7uVPB0NSF1c0QKIUSe0XoDDNVIj3nuq-9geBGo7QDCqVFJnqcKJmNObcJPPGeDpWcx2M8Ic8kdu1TJaczuqpqbT70oGk1BVHxFMmUF3cqi5XQvy4bN-FeNMyrNJYXextW7VxHt7ZVtvKrNb3gMDGKgH1BGjawF1IfC5DfgeBJW7vDw> 
>
>
> Hello, Best whishes to you all,
>
> No one has got an idea or did I wrote to the wrong mailing list ?
>
> Thanks
>
> Le 29/12/2023 à 19:17, Olivier S. a écrit :
>>
>> Hello list !
>>
>> I am a newcomer here, new to Rosegarden and Linux computer music in 
>> general.
>> For those old enough to know, I am coming from Cubase Score on Atari 
>> FALCON CLAB MKX.
>> I am learning Rosegarden and setting up my studio environment and 
>> wanted to prepare a MIDI Instrument definition to manage my Roland 
>> JV-1080 banks.
>> But I found the SR-JV80-07 - Super Sound Set Expansion Board Device 
>> file is missing.
>>
>> Then  I tried to make it on my own, following Wiki information:
>>
>> https://www.rosegardenmusic.com/wiki/dev:device_files#editing_with_the_gui
>>
>> https://www.rosegardenmusic.com/resources/documents/rgd-HOWTO.shtml
>>
>> I check the JV-1080 MIDI chart from Owner's Manual and here:
>>
>> https://static.roland.com/assets/media/pdf/Jv1080sq.pdf
>>
>> and found I should use (Board in expansion D) these settings.
>>
>> MSB    LSB    PrgChg    Patchs
>> 84        6        0-127    1-128
>> 84        7        0-127    129-256
>>
>> Problem, when trying to generate the RGD file I have got following 
>> error message :
>>
>> /Traceback (most recent call last):
>>   File "/home/userfolder/rosegarden/./txt2rgd.py", line 299, in <module>
>>     name = f"{MSB:03u}-{LSB:03u}"
>> ValueError: Unknown format code 'u' for object of type 'int'/
>>
>> I made a few tests editing the csv source file I found out the 
>> converter accepts only :
>>
>>   * 0 as MSB, at least from 0 to 10.
>>   * doesn't accept 7 value as LSB.
>>
>> Am I doing something wrong ? IS it a bug ? Any explanation or 
>> investigation suggestion to solve this ?
>>
>> Thanks, and best regards.
>>
>
> DuckDuckGo was unable to verify sender identity
>
>
> DuckDuckGo was unable to verify sender identity
>
> _______________________________________________
> Rosegarden-user mailing list
> Rosegarden-user-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org  - use the link below to unsubscribe
> https://lists.sourceforge.net/lists/listinfo/rosegarden-user

_______________________________________________
Rosegarden-user mailing list
Rosegarden-user-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-user