Re: MIDI Instrument creation script

   Thanks.  I've added the Roland-SR-JV80-07.rgd file and pushed it to 
master.

 > it's impossible within the same device
 > to manage both Patches and Rhythm Sets for the same MSB.

   I suspect you may have found a bug, but I will need to spend some 
time getting my head around this stuff again.  I'll put it on my todo.

Ted.

On 5/31/24 6:49 PM, Olivier S. wrote:
> Hello List,
> 
> For almost half a year, you'd think I was dead. But I'm not, even if 
> this damn job is killing me without giving me time to think about my 
> home studio.
> 
> First of all, thanks to Ted and Chuck for fixing the txt2rgb.py script, 
> which works perfectly.
> 
> Then here's the missing peripheral file for the Roland SR-JV80-07 
> extension (Super Sound Set) to which I've also included the percussion 
> key mappings for the 8 Drum Sets.
> 
> According to my tests, both Patch banks and Rhythm Sets work, 
> nevertheless with a limitation that I think is a Rosegarden bug, unless 
> you can explain where I'm wrong: it's impossible within the same device 
> to manage both Patches and Rhythm Sets for the same MSB. Rosegarden only 
> accepts one bank with the same LSB, even if you check the percussion 
> box, which I think is precisely designed to manage this conflict. At 
> this stage, my only solution is to create two devices for my JV1080, one 
> for patches on MIDI channels 1-9/11-16 and another specific to 
> percussion on channel 10 to manage rhythm sets. Frustrating.
> Following your reply, I'm going to update the JV1080 and the SR-JV80-09 
> (Session) extension devices to include key mapping. Some users might be 
> interested.
> 
> NB: I'm using version 20.12 of Rosegarden (Librazik 4 Distribution), 
> which may explains why I may be encountering a problem that has been 
> solved on more recent versions.
> 
> Olivier
> 
> Le 11/01/2024 à 10:21, chuck elliot a écrit :
>>
>> I tested the pulled /txt2rgb/.py against input that was previously 
>> throwing the error:
>>
>> /snd1    84    6    1    guitar
>> snd2    84    6    2    bass
>> snd3    84    7    1    drums
>> snd4    84    7    2    piano
>> /
>>
>> and the device names were generated as intended "084-006" etc in the 
>> rgb file,
>>
>> the MSB/LSB values lying as they do outside those defined as known XG 
>> Spec device names.
>>
>> So I think all is ok.
>>
>> Chuck.
>>
>>
>> On 10/01/2024 15:53, Ted Felix wrote:
>>> Patch merged as [d501a6f3].  Please test latest git.
>>>
>>> Ted.
>>>
>>> On 1/10/24 9:05 AM, Ted Felix wrote:
>>>>    Thanks for finding that Chuck.  Can you make a patch so I can get 
>>>> this fix in?  Not a problem if not.  I'll make the change myself.
>>>>
>>>> Ted.
>>>>
>>>> On 1/8/24 12:14 PM, chuck elliot wrote:
>>>>> It turns out that the "u"s in  line 299 of /txt2rgb.py/ are 
>>>>> obsolete format
>>>>>
>>>>> specifiers in Python. If you change these to  "d"s, the script 
>>>>> should work as intended.
>>>>>
>>>>>   i.e.
>>>>>
>>>>> /name = f"{MSB:03d}-{LSB:03d}"/
>>>>>
>>>>> instead of
>>>>>
>>>>> /name = f"{MSB:03u}-{LSB:03u}"/
>>>>>
>>>>> This should give you "084-006" and "084-007" as device names
>>>>>
>>>>> in your RGB file.
>>>>>
>>>>>
>>>>> Regards.
>>>>>
>>>>>
>>>>> On 07/01/2024 3:20 pm, Olivier S. wrote:
>>>>>> Hello, Best whishes to you all, No one has got an idea or did I 
>>>>>> wrote to the wrong mailing list ? Thanks Le 29/12/2023 à 19:17, 
>>>>>> Olivier S. a écrit : Hello list ! I am a newcomer here, new to 
>>>>>> Rosegarde
>>>>>> *DuckDuckGo* did not detect any trackers. More 
>>>>>> <https://duckduckgo.com/email/report#RFVDSzI.G5gBIIzEOCbxRlHEQWatqezP6gKgUJ2qB7rcAycFLBado3OMz5pWa5xF2tGGsyh9wxVwqpuIA7zEr2WlwVv_fSFUKmJElSePhFjmg6jYRYWf5JQOwOgWIozvYZaTWkTEquAhEwTSbRILfv8AAR0G7uVPB0NSF1c0QKIUSe0XoDDNVIj3nuq-9geBGo7QDCqVFJnqcKJmNObcJPPGeDpWcx2M8Ic8kdu1TJaczuqpqbT70oGk1BVHxFMmUF3cqi5XQvy4bN-FeNMyrNJYXextW7VxHt7ZVtvKrNb3gMDGKgH1BGjawF1IfC5DfgeBJW7vDw>
>>>>>> Unable to verify sender identity
>>>>>>
>>>>>> Report Spam 
>>>>>> <https://duckduckgo.com/email/report-spam#RFVDSzI.G5gBIIzEOCbxRlHEQWatqezP6gKgUJ2qB7rcAycFLBado3OMz5pWa5xF2tGGsyh9wxVwqpuIA7zEr2WlwVv_fSFUKmJElSePhFjmg6jYRYWf5JQOwOgWIozvYZaTWkTEquAhEwTSbRILfv8AAR0G7uVPB0NSF1c0QKIUSe0XoDDNVIj3nuq-9geBGo7QDCqVFJnqcKJmNObcJPPGeDpWcx2M8Ic8kdu1TJaczuqpqbT70oGk1BVHxFMmUF3cqi5XQvy4bN-FeNMyrNJYXextW7VxHt7ZVtvKrNb3gMDGKgH1BGjawF1IfC5DfgeBJW7vDw>
>>>>>>
>>>>>> Hello, Best whishes to you all,
>>>>>>
>>>>>> No one has got an idea or did I wrote to the wrong mailing list ?
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Le 29/12/2023 à 19:17, Olivier S. a écrit :
>>>>>>>
>>>>>>> Hello list !
>>>>>>>
>>>>>>> I am a newcomer here, new to Rosegarden and Linux computer music 
>>>>>>> in general.
>>>>>>> For those old enough to know, I am coming from Cubase Score on 
>>>>>>> Atari FALCON CLAB MKX.
>>>>>>> I am learning Rosegarden and setting up my studio environment and 
>>>>>>> wanted to prepare a MIDI Instrument definition to manage my 
>>>>>>> Roland JV-1080 banks.
>>>>>>> But I found the SR-JV80-07 - Super Sound Set Expansion Board 
>>>>>>> Device file is missing.
>>>>>>>
>>>>>>> Then  I tried to make it on my own, following Wiki information:
>>>>>>>
>>>>>>> https://www.rosegardenmusic.com/wiki/dev:device_files#editing_with_the_gui
>>>>>>>
>>>>>>> https://www.rosegardenmusic.com/resources/documents/rgd-HOWTO.shtml
>>>>>>>
>>>>>>> I check the JV-1080 MIDI chart from Owner's Manual and here:
>>>>>>>
>>>>>>> https://static.roland.com/assets/media/pdf/Jv1080sq.pdf
>>>>>>>
>>>>>>> and found I should use (Board in expansion D) these settings.
>>>>>>>
>>>>>>> MSB    LSB    PrgChg    Patchs
>>>>>>> 84        6        0-127    1-128
>>>>>>> 84        7        0-127    129-256
>>>>>>>
>>>>>>> Problem, when trying to generate the RGD file I have got 
>>>>>>> following error message :
>>>>>>>
>>>>>>> /Traceback (most recent call last):
>>>>>>>   File "/home/userfolder/rosegarden/./txt2rgd.py", line 299, in 
>>>>>>> <module>
>>>>>>>     name = f"{MSB:03u}-{LSB:03u}"
>>>>>>> ValueError: Unknown format code 'u' for object of type 'int'/
>>>>>>>
>>>>>>> I made a few tests editing the csv source file I found out the 
>>>>>>> converter accepts only :
>>>>>>>
>>>>>>>   * 0 as MSB, at least from 0 to 10.
>>>>>>>   * doesn't accept 7 value as LSB.
>>>>>>>
>>>>>>> Am I doing something wrong ? IS it a bug ? Any explanation or 
>>>>>>> investigation suggestion to solve this ?
>>>>>>>
>>>>>>> Thanks, and best regards.
>>>>>>>
>>>>>>
>>>>>> DuckDuckGo was unable to verify sender identity
>>>>>>
>>>>>>
>>>>>> DuckDuckGo was unable to verify sender identity
>>>>>>
>>>>>> _______________________________________________
>>>>>> Rosegarden-user mailing list
>>>>>> [email protected] - use the link below to 
>>>>>> unsubscribe
>>>>>> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Rosegarden-user mailing list
>>>>> [email protected] - use the link below to 
>>>>> unsubscribe
>>>>> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
>>>>
>>>>
>>>> _______________________________________________
>>>> Rosegarden-user mailing list
>>>> [email protected] - use the link below to 
>>>> unsubscribe
>>>> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
>>>
>>>
>>> _______________________________________________
>>> Rosegarden-user mailing list
>>> [email protected] - use the link below to 
>>> unsubscribe
>>> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
>>
>>
>> _______________________________________________
>> Rosegarden-user mailing list
>> [email protected]  - use the link below to unsubscribe
>> https://lists.sourceforge.net/lists/listinfo/rosegarden-user
> 
> 
> _______________________________________________
> Rosegarden-user mailing list
> [email protected] - use the link below to unsubscribe
> https://lists.sourceforge.net/lists/listinfo/rosegarden-user


_______________________________________________
Rosegarden-user mailing list
[email protected] - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-user