Re: Oberheim Matrix-1000 RGD file

   I've reviewed the TG77 and Matrix-1000 .rgd file and I noticed that 
the default volume for both is set to 0, and the default breath 
controller (CC2) is set to 0 as well.  I would assume this leads to 
silence unless changes are made.

   Before I ship these, I'm going to change this so that the default 
volume is 100, and the default breath controller (CC2) is 127.  This is 
usually how we set things up so that we are making sound immediately. 
Do you see any problem with doing this?

Ted.

On 2/19/26 12:58 PM, Arne wrote:
> 
> Ok, here is the next RGD file I created:
> http://www.linuxtech.net/files/Oberheim_Matrix-1000.rgd
> 
> This is not based on the one that was already present in Rosegarden as
> that one seemed to have quite a few typos and it had all the patch names
> in lower case which didn't match the offical patch list of the Matrix-1000.
> 
> So I used an INS file as a better starting point and I double-checked
> all 1000 patch names one by one with the offical patch name list
> correcting any typos.
> 
> Also I added the supported controllers and of course made it compatible
> with the newly implemented bank switch method.
> 
> 
> On Thu, 12 Feb 2026, Arne wrote:
>>
>> Ok, now that Rosegarden supports the TG77 bank select method here is the
>> final version of the rgd file I made for the TG77 for inclusion in
>> Rosegarden:
>> http://www.linuxtech.net/files/Yamaha_TG77.rgd
>>
>> Other rgd files will follow in the near future.
>>
>>