Re: Library and clean cartdrige...

Jose Alberto <[email protected]>
Newsgroups gmane.comp.bacula.user
Message-ID <CALz1Nr2N3mcuXaoNdeM83JDcK89buBHzhHVMfd0zPQ3FYMwTCA@mail.gmail.com>
The ideal is always to clean the disk from the web-gui software of the tape
library.

with the SD  stop

On Mon, Aug 26, 2024 at 4:42 PM Marco Gaiarin <[email protected]>
wrote:

>
> I've setup in my pool(s) the 'Cleaning Prefix' and addedd to the library
> the
> cleaning tape; situation now is:
>
>  *update slots storage=CNPVE3Autochanger
>  Connecting to Storage daemon CNPVE3Autochanger at cnpve3.cn.lnf.it:9103
> ...
>  3306 Issuing autochanger "slots" command.
>  Device "Autochanger" has 8 slots.
>  Connecting to Storage daemon CNPVE3Autochanger at cnpve3.cn.lnf.it:9103
> ...
>  3306 Issuing autochanger "list" command.
>  Catalog record for Volume "AAJ666L9" is up to date.
>  Catalog record for Volume "AAJ667L9" is up to date.
>  Volume "CLN001L9" not found in catalog. Slot=8 InChanger set to zero.
>
> I've tried to mount cleaning cartdrige but:
>
>  *mount storage=CNPVE3Autochanger slot=8
>  3304 Issuing autochanger "load Volume , Slot 8, Drive 0" command.
>  3305 Autochanger "load Volume , Slot 8, Drive 0", status is OK.
>  3901 Unable to open device ""LTO9Storage0" (/dev/nst0)":
> ERR=tape_dev.c:170 Unable to open device "LTO9Storage0" (/dev/nst0):
> ERR=Input/output error
>
> This seems also pretty logic: bacula mount the cartdrige and (try to) read
> it, but this is a clieaning one...
> Anyway, i've waited the command to end, then i've tried also:
>
>  *unmount storage=CNPVE3Autochanger
>  3307 Issuing autochanger "unload Volume *Unknown*, Slot 8, Drive 0"
> command.
>  3901 Device ""LTO9Storage0" (/dev/nst0)" is already unmounted.
>
> after that, anyway, cleaning cartdrige was back on slot 8 (probably the
> previous mount failed early and anyway cleaning tape was just on the route
> to
> slot 8).
>
>
> I've the doubt i'm doing something wrong, eg i don't have to use '(u)mount
> storage' command from bacula console to mount cleaning cartdrige, but use
> insted direct library command via mtx-changer script, for example.
>
>
> Someone have some clue? Thanks.
>
> --
>
>
>
>
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>


-- 
#############################
#   Sistema Operativo: Debian      #
#        Caracas, Venezuela          #
#############################

_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.