Re: setting up an autochange in the cloud

Am 11.10.24 um 19:16 schrieb Marcin Haba:
> On Fri, 11 Oct 2024 at 17:23, Stefan G. Weichinger <[email protected]> wrote:
>> Trying to set up an autochanger using a S3-compatible bucket in "the
>> cloud" (in my case at Contabo in germany).
>>
>> Fresh installation of Bacula-15.0.2, Bacularis-4.0.0 on a Debian-12.7
>> machine.
> 
> Hello Stefan,
> 
>> Added the packages:  bacula-cloud-storage-s3 plus
>> bacula-cloud-storage-common
> 
> This is OK.
> 
>> Restarted all the daemons.
>>
>> Looked at https://www.youtube.com/watch?v=MRdM2uKlHSI ... I don't get
>> that "Add cloud storage" button to begin with ...
> 
> The "Add cloud storage" wizard is a function available since the
> latest Bacularis 4.3.0. Your Bacularis 4.0.0 does not have it.

ok

> This is almost correct. You need to change:
> 
>   ChangerCommand = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"
> 
> into:
> 
>   ChangerCommand = "/dev/null"
> 
> and restart the storage daemon.

did that

>> The changer doesn't show up in bacularis, I add it in the API menu and
>> get things like "/dev/null is not an sg device, or old sg driver". Sure.
> 
> To see this autochanger in Bacularis you need to add the Storage
> resource with the Autochanger for that in the Director configuration.

Sorry, I don't get it right now. pls advise in more detail. I have:

# sd

Device {
   Name = "CloudStorage1"
   MediaType = "cloudS3-media"
   DeviceType = "Cloud"
   ArchiveDevice = "/tmp"
   RemovableMedia = no
   RandomAccess = yes
   AutomaticMount = yes
   LabelMedia = yes
   AlwaysOpen = no
   MaximumPartSize = 10000000
   Cloud = "contabo-bucket1"
}
Autochanger {
   Name = "CloudAutoChanger1"
   Device = "CloudStorage1"
   ChangerDevice = "/dev/null"
   ChangerCommand = "/dev/null"
}

# dir

Storage {
   Name = "Cloud1"
   SdPort = 9103
   Address = "tx100.loc.oops.co.at"
   Password = "_swXHSgGzxxxxxxxx0"
   MediaType = "cloud1"
   Autochanger = "CloudAutoChanger1"
   Device = "CloudStorage1"
   MaximumConcurrentJobs = 4
}

what is wrong, what is missing?

I lose track here ... getting tired already, sry ;-)