[PATCH v5 1/4] clk: qcom: Add initial Clock driver for ipq9650

Add initial set of clocks and resets for enabling U-Boot on ipq9650
based RDP platforms.

Signed-off-by: Badhrinath S <[email protected]>
---
 drivers/clk/qcom/Kconfig         |  8 +++
 drivers/clk/qcom/Makefile        |  1 +
 drivers/clk/qcom/clock-ipq9650.c | 93 ++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/clk/qcom/clock-ipq9650.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0a2ce55aaa2f..82c56cf605a8 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -47,6 +47,14 @@ config CLK_QCOM_IPQ9574
 	  on the Snapdragon IPQ9574 SoC. This driver supports the clocks
 	  and resets exposed by the GCC hardware block.
 
+config CLK_QCOM_IPQ9650
+	bool "Qualcomm IPQ9650 GCC"
+	select CLK_QCOM
+	help
+	  Say Y here to enable support for the Global Clock Controller
+	  on the Qualcomm IPQ9650 SoC. This driver supports the clocks
+	  and resets exposed by the GCC hardware block.
+
 config CLK_QCOM_MILOS
 	bool "Qualcomm Milos GCC"
 	select CLK_QCOM
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index b96d61b603e4..6cf069053743 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CLK_QCOM_APQ8096) += clock-apq8096.o
 obj-$(CONFIG_CLK_QCOM_IPQ4019) += clock-ipq4019.o
 obj-$(CONFIG_CLK_QCOM_IPQ5424) += clock-ipq5424.o
 obj-$(CONFIG_CLK_QCOM_IPQ9574) += clock-ipq9574.o
+obj-$(CONFIG_CLK_QCOM_IPQ9650) += clock-ipq9650.o
 obj-$(CONFIG_CLK_QCOM_MILOS) += clock-milos.o
 obj-$(CONFIG_CLK_QCOM_QCM2290) += clock-qcm2290.o
 obj-$(CONFIG_CLK_QCOM_QCS404) += clock-qcs404.o
diff --git a/drivers/clk/qcom/clock-ipq9650.c b/drivers/clk/qcom/clock-ipq9650.c
new file mode 100644
index 000000000000..29c0c3fdf49f
--- /dev/null
+++ b/drivers/clk/qcom/clock-ipq9650.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Clock drivers for Qualcomm ipq9650
+ *
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/bug.h>
+#include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,ipq9650-gcc.h>
+#include <dt-bindings/reset/qcom,ipq9650-gcc.h>
+
+#include "clock-qcom.h"
+
+#define GCC_IM_SLEEP_CBCR			0x1834020u
+
+static ulong ipq9650_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case GCC_QUPV3_WRAP_SE6_CLK:
+		clk_rcg_set_rate_mnd(priv->base, priv->data->clks[clk->id].cbcr_reg,
+				     1, 2, 217, CFG_CLK_SRC_GPLL0, 8);
+		return rate;
+	case GCC_SDCC1_APPS_CLK:
+		clk_rcg_set_rate_mnd(priv->base, priv->data->clks[clk->id].cbcr_reg,
+				     5, 0, 0, CFG_CLK_SRC_GPLL2_MAIN, 16);
+		return rate;
+	}
+	return 0;
+}
+
+static const struct gate_clk ipq9650_clks[] = {
+	GATE_CLK_POLLED(GCC_SDCC1_AHB_CLK, 0x3303c, BIT(0), 0x3303c),
+	GATE_CLK_POLLED(GCC_SDCC1_APPS_CLK, 0x3302c, BIT(0), 0x33004),
+	GATE_CLK_POLLED(GCC_QUPV3_WRAP_SE6_CLK, 0x04018, BIT(0), 0x04004),
+};
+
+static int ipq9650_enable(struct clk *clk)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	if (clk->id >= ARRAY_SIZE(ipq9650_clks) || !ipq9650_clks[clk->id].reg)
+		return -EINVAL;
+
+	return qcom_gate_clk_en(priv, clk->id);
+}
+
+static const struct qcom_reset_map ipq9650_gcc_resets[] = {
+	[GCC_SDCC_BCR] = { 0x33000 },
+};
+
+static struct msm_clk_data ipq9650_gcc_data = {
+	.resets = ipq9650_gcc_resets,
+	.num_resets = ARRAY_SIZE(ipq9650_gcc_resets),
+	.clks = ipq9650_clks,
+	.num_clks = ARRAY_SIZE(ipq9650_clks),
+
+	.enable = ipq9650_enable,
+	.set_rate = ipq9650_set_rate,
+};
+
+static const struct udevice_id gcc_ipq9650_of_match[] = {
+	{
+		.compatible = "qcom,ipq9650-gcc",
+		.data = (ulong)&ipq9650_gcc_data,
+	},
+	{ }
+};
+
+static int ipq9650_clk_probe(struct udevice *dev)
+{
+	/* Enable the sleep clock needed for the MMC block reset */
+	writel(BIT(0), GCC_IM_SLEEP_CBCR);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(gcc_ipq9650) = {
+	.name		= "gcc_ipq9650",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_ipq9650_of_match,
+	.probe		= ipq9650_clk_probe,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC | DM_FLAG_DEFAULT_PD_CTRL_OFF,
+};
-- 
2.34.1