[PATCH 0/4] Add Amlogic T7 (A311D2) and Khadas VIM4 support

This series adds initial mainline support for the Amlogic T7 SoC
family and the Khadas VIM4 board (A311D2):
 - S4-generation UART support
 - the T7 platform code
 - VIM4 board and defconfig
 - VIM4 documentation

Tested on a Khadas VIM4 board, both chainloaded from the vendor U-Boot
(tftpboot) and cold-booted from an SD card.

Lucas Tanure (4):
  serial: meson: add Amlogic S4 UART support
  arm: meson: add Amlogic T7 SoC family support
  board: amlogic: add Khadas VIM4 support
  doc: board: amlogic: add Khadas VIM4 documentation

 .../amlogic-t7-a311d2-khadas-vim4-u-boot.dtsi |  22 ++++
 arch/arm/include/asm/arch-meson/boot0.h       |  18 +++
 arch/arm/mach-meson/Kconfig                   |  10 ++
 arch/arm/mach-meson/Makefile                  |   1 +
 arch/arm/mach-meson/board-t7.c                |  97 ++++++++++++++
 board/amlogic/vim4/MAINTAINERS                |   8 ++
 board/amlogic/vim4/Makefile                   |   4 +
 board/amlogic/vim4/vim4.c                     |  14 ++
 configs/khadas-vim4_defconfig                 |  27 ++++
 doc/board/amlogic/index.rst                   | 119 ++++++++---------
 doc/board/amlogic/khadas-vim4.rst             | 122 ++++++++++++++++++
 drivers/serial/serial_meson.c                 |  51 ++++++--
 12 files changed, 421 insertions(+), 72 deletions(-)
 create mode 100644 arch/arm/dts/amlogic-t7-a311d2-khadas-vim4-u-boot.dtsi
 create mode 100644 arch/arm/include/asm/arch-meson/boot0.h
 create mode 100644 arch/arm/mach-meson/board-t7.c
 create mode 100644 board/amlogic/vim4/MAINTAINERS
 create mode 100644 board/amlogic/vim4/Makefile
 create mode 100644 board/amlogic/vim4/vim4.c
 create mode 100644 configs/khadas-vim4_defconfig
 create mode 100644 doc/board/amlogic/khadas-vim4.rst

-- 
2.55.0