[PATCH] configs: sc598-som-ezlite: select EV-SOMCRR-EZLITE carrier
Ozan Durgut <[email protected]>
| Newsgroups | gmane.comp.boot-loaders.u-boot.general,gmane.comp.boot-loaders.u-boot |
|---|---|
| Message-ID | <[email protected]> |
From: Ozan Durgut <[email protected]> TARGET_SC598_SOM_EZLITE's 'select ADI_CARRIER_SOMCRR_EZLITE' loses against the carrier choice's own default (ADI_CARRIER_SOMCRR_EZKIT) since defconfig did not pin it explicitly. Board built with EZKIT carrier init, so the EZLITE's eth0-reset line was never toggled and the PHY stayed in reset. Fixes: c9e893d6266d ("board: adi: Add support for SC598") Signed-off-by: Ozan Durgut <[email protected]> --- configs/sc598-som-ezlite-spl_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/sc598-som-ezlite-spl_defconfig b/configs/sc598-som-ezlite-spl_defconfig index 9afe5c0789a..9ae5bdad6ca 100644 --- a/configs/sc598-som-ezlite-spl_defconfig +++ b/configs/sc598-som-ezlite-spl_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_STACK=0x200E4000 CONFIG_SC59X_64=y CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_LOAD_ADDR=0x90000000 +CONFIG_ADI_CARRIER_SOMCRR_EZLITE=y CONFIG_CGU1_PLL3_DDRCLK=y CONFIG_CGU1_PLL3_VCO_MSEL=64 CONFIG_CGU1_PLL3_DCLK_DIV=2 -- 2.43.0