[PATCH v3 05/13] phy: qcom: qusb2: add Shikra PHY configuration

Add support for the "qcom,shikra-qusb2-phy" compatible by introducing
the required PHY configuration data and binding it to the QUSB2 PHY
driver.

This allows USB2 PHY initialization on Qualcomm Shikra platforms.

Signed-off-by: Aswin Murugan <[email protected]>
---
 drivers/phy/qcom/phy-qcom-qusb2.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/phy/qcom/phy-qcom-qusb2.c b/drivers/phy/qcom/phy-qcom-qusb2.c
index 6278171b100..f5214bffc52 100644
--- a/drivers/phy/qcom/phy-qcom-qusb2.c
+++ b/drivers/phy/qcom/phy-qcom-qusb2.c
@@ -310,6 +310,18 @@ static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
 	.update_tune1_with_efuse = true,
 };
 
+static const struct qusb2_phy_cfg shikra_phy_cfg = {
+	.tbl = qcs615_init_tbl,
+	.tbl_num = ARRAY_SIZE(qcs615_init_tbl),
+	.regs = ipq6018_regs_layout,
+
+	.has_pll_test = true,
+	.se_clk_scheme_default = true,
+	.disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+	.mask_core_ready = PLL_LOCKED,
+	.autoresume_en = BIT(3),
+};
+
 /**
  * struct qusb2_phy - structure holding qusb2 phy attributes
  *
@@ -505,6 +517,8 @@ static const struct udevice_id qusb2phy_ids[] = {
 	  .data = (ulong)&sm6115_phy_cfg },
 	{ .compatible = "qcom,qcs615-qusb2-phy",
 	  .data = (ulong)&qcs615_phy_cfg },
+	{ .compatible = "qcom,shikra-qusb2-phy",
+	  .data = (ulong)&shikra_phy_cfg },
 	{ .compatible = "qcom,sdm660-qusb2-phy",
 	  .data = (ulong)&sdm660_phy_cfg },
 	{ .compatible = "qcom,sm6115-qusb2-phy",
-- 
2.34.1