[PATCH v3 11/13] configs: add shikra defconfig for IQS & CQS boards
Aswin Murugan via U-Boot <[email protected]>
| Newsgroups | gmane.comp.boot-loaders.u-boot.general,gmane.comp.boot-loaders.u-boot |
|---|---|
| Message-ID | <[email protected]> |
Introduce a defconfig for Shikra based boards. Signed-off-by: Aswin Murugan <[email protected]> --- configs/qcom_shikra_cqs_defconfig | 25 +++++++++++++++++++++++++ configs/qcom_shikra_iqs_defconfig | 25 +++++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 configs/qcom_shikra_cqs_defconfig create mode 100644 configs/qcom_shikra_iqs_defconfig diff --git a/configs/qcom_shikra_cqs_defconfig b/configs/qcom_shikra_cqs_defconfig new file mode 100644 index 00000000000..1c66a561bee --- /dev/null +++ b/configs/qcom_shikra_cqs_defconfig @@ -0,0 +1,25 @@ +# Configuration for building U-Boot in Shikra IQS EVK + +#include "qcom_defconfig" +#include "board/qualcomm/debug-shikra-evk.config" + +# Otherwise buildman thinks this isn't an ARM platform +CONFIG_ARM=y + +# CONFIG_OF_UPSTREAM is not set + +CONFIG_DEFAULT_DEVICE_TREE="shikra-cqs-evk" + +# Address where U-Boot will be loaded +CONFIG_TEXT_BASE=0x9f400000 +CONFIG_REMAKE_ELF=y + +CONFIG_FASTBOOT_BUF_ADDR=0xc5000000 + +CONFIG_WATCHDOG_AUTOSTART=y + +# Shikra has eMMC only, not UFS/SCSI - override qcom_defconfig settings +CONFIG_FASTBOOT_FLASH_BLOCK_INTERFACE_NAME="mmc" +CONFIG_FASTBOOT_FLASH_BLOCK_DEVICE_ID=0 + +# CONFIG_SCSI is not set diff --git a/configs/qcom_shikra_iqs_defconfig b/configs/qcom_shikra_iqs_defconfig new file mode 100644 index 00000000000..d3315ade952 --- /dev/null +++ b/configs/qcom_shikra_iqs_defconfig @@ -0,0 +1,25 @@ +# Configuration for building U-Boot in Shikra IQS EVK + +#include "qcom_defconfig" +#include "board/qualcomm/debug-shikra-evk.config" + +# Otherwise buildman thinks this isn't an ARM platform +CONFIG_ARM=y + +# CONFIG_OF_UPSTREAM is not set + +CONFIG_DEFAULT_DEVICE_TREE="shikra-iqs-evk" + +# Address where U-Boot will be loaded +CONFIG_TEXT_BASE=0x9f400000 +CONFIG_REMAKE_ELF=y + +CONFIG_FASTBOOT_BUF_ADDR=0xc5000000 + +CONFIG_WATCHDOG_AUTOSTART=y + +# Shikra has eMMC only, not UFS/SCSI - override qcom_defconfig settings +CONFIG_FASTBOOT_FLASH_BLOCK_INTERFACE_NAME="mmc" +CONFIG_FASTBOOT_FLASH_BLOCK_DEVICE_ID=0 + +# CONFIG_SCSI is not set -- 2.34.1