Re: [PATCH v1 0/1] spi: Add Qualcomm GENI QUPv3 SPI controller driver

On 8/14/26 12:45, Vandhiadevan Karunamoorthy wrote:
> This series adds a DM_SPI driver for the SPI-protocol personality of
> the Qualcomm GENI/QUPv3 Serial Engine, used on Qualcomm SoCs such as
> SDM845, SM8250 and SA8775P.
> 
> The driver supports both the CPU-driven FIFO transfer path and the
> Serial Engine's own DMA engine (SE-DMA), selected per SPI bus via the
> optional "qcom,se-dma-allowed" device tree property. It is based on
> the equivalent Linux GENI SPI driver and shared GENI SE helper code
> (see the individual patch for the specific commits referenced).
> 
> Vandhiadevan Karunamoorthy (1):
>    spi: Add Qualcomm GENI QUPv3 SPI controller driver
> 
>   .../spi/qcom,geni-spi.txt                     |  44 ++
>   drivers/spi/Kconfig                           |   9 +
>   drivers/spi/Makefile                          |   1 +
>   drivers/spi/qcom_geni_spi.c                   | 735 ++++++++++++++++++
>   include/soc/qcom/geni-se.h                    |  32 +
>   5 files changed, 821 insertions(+)
>   create mode 100644 doc/device-tree-bindings/spi/qcom,geni-spi.txt
>   create mode 100644 drivers/spi/qcom_geni_spi.c
> 

Please do not send cover letters for single patches.

Use a proper tool like b4 to format your patch series and changelog.

Neil