Re: [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)

On Sat, Aug 15, 2026 at 10:06:23AM +1000, Daniel Martin wrote:
> Thanks for the further details Chris,
> 
> It would indeed be great if we could move this device to mainline end-to-end.
> Let me know how you get on with v2026.07 and if possible, test your
> DTS with the stable kernel (7.1.8 or similar).
> When I reverted uboot, I encountered inconsistent I/O issues with the
> latest stable kernel, therefore I ended up going back to the BSP.
> 
> Thanks for all your work, we appreciate the effort.
> 
> Dan

I've just tested booting the device with a completely unmodified
version of Arm Trusted Firmware (checked out at tag v2.15.0), U-Boot
(checked out at tag v2026.07 and changing nothing from the
gameforce-ace-rk3588s_defconfig), loading Linux 7.2 (tag v7.2-rc7) via
extlinux boot method and it seems to be working. I do note that it
seems to be slower to boot since I upgraded A-TF and U-Boot to the most
recent releases, so I'll troubleshoot that some more next week as I try
to install a fully up to date Ubuntu 26.04 on it.

I know you said it's hard to get a serial port on it, but if you
continue to have problems booting it that might be required to
troubleshoot it further. Otherwise I can send you my binaries if
need be.

Thank you,
Chris

> 
> 
> On Sat, 15 Aug 2026 at 07:40, Christopher Morgan
> <[email protected]> wrote:
> >
> > I'm having trouble with my usual email client, so I'm sorry if this message is formatted weird.
> >
> > I have tested the device most recently with 2026.04 with the default defconfig options. I am using mainline Arm Trusted Firmware though, not the Rockchip versions. Using Rockchip's A-TF should work, but again it's not something I've tested. I can note that if you're using mainline A-TF along with mainline Optee, you need to pass CONFIG_SPL_ATF_NO_PLATFORM_PARAM=N, otherwise the device will fail to boot because it won't protect the Optee regions. (For mainline A-TF CONFIG_SPL_ATF_NO_PLATFORM_PARAM is optional unless you use Optee, for Rockchip's BL31 you need CONFIG_SPL_ATF_NO_PLATFORM_PARAM=Y).
> >
> > I'm going to test the device next week and see if I encounter any issues with it. I'll report back if I find out anything weird.
> >
> > Thank you,
> > Chris
> > ________________________________
> > From: Quentin Schulz <[email protected]>
> > Sent: Wednesday, August 12, 2026 10:22 AM
> > To: [email protected] <[email protected]>; [email protected] <[email protected]>
> > Cc: Chris Morgan <[email protected]>
> > Subject: Re: [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)
> >
> > +Cc Chris who maintains this board and may be able to help.
> >
> > I somehow didn't receive this mail in my inbox, here's my attempt at
> > quoting text from a mail I didn't receive (and it's also not available
> > on lore.kernel.org...).
> >
> >  > Hello,
> >  >
> >  > I am experiencing a total boot failure on the GameForce Ace handheld
> >  > console (Rockchip RK3588S) when trying to run mainline U-Boot
> >  > v2026.07.
> >  > The device fails to initialize or display any output during the
> >  > initial handshake.
> >  > Unfortunately, due to the tightly integrated form factor of this
> >  > handheld device, it is exceptionally difficult to break open the
> >  > casing and wire up a UART serial console to capture early boot logs.
> >  > The target operating system (Batocera Linux) environment is running
> >  > the mainline Linux 7.1.5 kernel.
> >  > Given the complete lack of visible console output, I wanted to check:
> >  >
> >  > 1. Has the GameForce Ace board target been actively tested with the
> >  > v2026.07 release?
> >  > 2. Are there any specific or updated build instructions, BL31/TPL/SPL
> >  > combinations, or proprietary Rockchip firmware binary requirements
> >  > (rkbin) needed for this release that may differ from previous
> >  > versions?
> >  >
> >  > For reference, the build configuration used was: gameforce-ace->
> > rk3588s_defconfig
> >  > TF-A / BL31 version: rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.21.bin /
> >  > rk3588_bl31_v1.54.elf
> >  > Compiler: GCC 14.3
> >  > Linux 7.1.5 uses the rk3588s-gameforce-ace.dts
> >  >
> >  > Any guidance on known regressions regarding this target, or
> >  > recommendations on how to isolate the stage where it hangs without a
> >  > hardware UART, would be greatly appreciated.
> >  >
> >
> > If you have a known working version of U-Boot, maybe start a bisect with
> > that commit as good and 2026.07 as bad to isolate a commit that broke
> > the board.
> >
> > Cheers,
> > Quentin
> 
> 
> 
> -- 
> 
> Kind Regards,
> 
> Daniel