Re: gnatsweb make test fails

Adam Weremczuk <[email protected]>  wrote:
> [gnats@sierra gnatsweb-4.00]$ make test USERNAME=gnats PASSWORD=gnats 
> DATABASE=default                                                                                    
>        
> 
> connect...........................................FAIL

hmm...

> gnatsd starts fine but not automatically, I have to start it
> manually after every reboot:
> 
> [gnats@sierra root]$ /usr/local/libexec/gnats/gnatsd
200 sierra GNATS server 4.1.0 ready.


OK.  That's good.  You can verify that everything works from that
prompt with respect to the gnatsd installation.  Start it with "gnatsd
-n" though, so it's doesn't expect inetd superserver to be controlling
it.  Then send it:

	CHDB default gnats gnats

You should get something that looks like:

	210-Now accessing GNATS database 'default'
	210 User access level set to 'admin'


> 3. [root@sierra local]# telnet localhost 1529
>     Trying 127.0.0.1.1529...
>     Connected to localhost.
>     Escape character is '^]'.
>     Connection closed by foreign host.

Not good.

Try adding the log_on_success/log_on_failure options to the xinetd
entry for support.  You should be able to retrieve the exit status of
the service.  Make sure you've add a permit rule to /etc/hosts.allow
for the gnatsd service.  i.e.

	#/etc/hosts.allow
	gnatsd: LOCAL

I would really like to get logging support in to shape, especially for
these cases.

-- 
Chad Walstrom <[email protected]>           http://www.wookimus.net/
           assert(expired(knowledge)); /* core dump */