Re: WG: Re: [Wyonacms-dev] Installing Instructions winnt
Mehmet Birgi <[email protected]>
| Newsgroups | gmane.comp.cms.wyona.user |
|---|---|
| Message-ID | <[email protected]> |
I have checked it, and there is no "standalone" part. The cache
directory is: "{CATALINA_HOME}/work/localhost/wyona-cms", so you can go
ahead and fix it.
cheers,
memo
margrit john wrote:
> Well, here is a reedited version of the win installing.
> There is still one of Memo's comments in there. I do have this Standalone
> directory in my tomcat work directory. Maybe someone can check this. All
> other comments are integrated.
> Margrit
>
>
>
>>Okay, I'll do it, but give some time. Next week, I am really busy doing
>
> other
>
>>things, so the week after. Okay?
>
>
>
> Sure, take your time. I am not a Windows user;-)
>
> Thanks
>
> Michael
>
>
>
>>Margrit
>>
>>
>>
>>>Memo, thanks for proof reading.
>>>
>>>Shouldn't we try to combine the Win and UNIX INSTALL-SRC
>>>within one Document (XML!)?
>>>
>>>Margrit, are you going to reedit/incorporate Memo's comments?
>>>
>>>Thanks
>>>
>>>Michael
>>>
>>>Mehmet Birgi wrote:
>>>
>>>
>>>>I have attached a commented version of the how-to (comments in <comment>
>>>>tags) to this post. I do not have the time and ressources to test it
>>>>actually (new PC, not everything installed yet), but with those
>>>>comments, it should work. If anybody is still having trouble, I will
>>>>gladly install and test everything, but I prefer not doing it right now
>>>>if it is not necessary :-)
>>>>
>>>>Anyway, I am always here if support is needed, just drop me a mail (in
>>>>case I don't have the time to catch up with the list).
>>>>
>>>>Cheers,
>>>>
>>>>Memo
>>>>
>>>>Mehmet Birgi wrote:
>>>>
>>>>
>>>>>Michael Wechner wrote:
>>>>>
>>>>>
>>>>>>Dear Margrit
>>>>>>
>>>>>>Thanks a lot for your contribution.
>>>>>>Maybe a Windows user (Memo?:-) could proof-read it.
>>>>>>
>>>>>
>>>>>sure will do, but I have only windows xp installed at the moment, is
>>>>>that ok if i try it out on that?
>>>>>
>>>>>cheers,
>>>>>
>>>>>memo
>>>>>
>>>>>
>>>>>
>>>>>>All the best
>>>>>>
>>>>>>Michael
>>>>>>
>>>>>>Margrit John wrote:
>>>>>>
>>>>>>
>>>>>>>Michael asked me to post this here.
>>>>>>>You'll find attached a guide on how to install wyonacms on winnt.
>>>>>>>
>>>>>>>Margrit
>>>>>>>
>>>>>>>
>>>>>>>----------------------------------------------------------------------
>>>>>>>--
>>>>>>>
>>>>>>>
>>>>>>>W Y O N A C O N T E N T - M A N A G E M E N T - S Y S T E M
>>>>>>>
>>>>>>>============================================================== Content
>>>>>>>--------
>>>>>>>-Prerequisite
>>>>>>>-Directory structure
>>>>>>>-Installation -Notes
>>>>>>>
>>>>>>>
>>>>>>>Prerequisite
>>>>>>>------------
>>>>>>>
>>>>>>>You need a tool to extract files
>>>>>>>for example powerarchiver or winzip. You can get it from:
>>>>>>>http://www.powerarchiver.com/download/
>>>>>>>http://www.winzip.com
>>>>>>>
>>>>>>>You need to have installed jdk.
>>>>>>>Point your favorite browser to http://java.sun.com Get the jdk and
>>>>>>>install it in c:\
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>Directory structure
>>>>>>>-------------------
>>>>>>>
>>>>>>>make a directory "cms" and within this directory two others "build"
>>>>>>>and "src"
>>>>>>>Put in your "cms\build" directory "Tomcat" and "Ant" (Description
>>>>>>>follows)
>>>>>>>Put the wyona-cms in your "cms\src" directory (Description follows)
>>>>>>>
>>>>>>>Installation
>>>>>>>------------ 1) Get, install, start, try and stop Tomcat
>>>>>>>Download jakarta-tomcat-4.0 or a newer version from
>>>>>>>http://jakarta.apache.org/builds/
>>>>>>>Extract it to the directory "cms\build"
>>>>>>>
>>>>>>>Start a dos window ant type:
>>>>>>>( dos commands are marked with a > )
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>set ANT_HOME=c:\cms\build\jakarta-ant-1.4.1
>>>>>>>>set CATALINA_HOME=C:\cms\build\jakarta-tomcat-4.0
>>>>>>>>set JAVA_HOME=c:\jdk1.3.1_03
>>>>>>>>set PATH=%PATH%;%ANT_HOME%\bin
>>>>>>>>
>>>>>>>
>>>>>>>(Make shure you write the path according to your directory structure
>>>>>>>and names)
>>>>>>>
>>>>>>>Start Tomcat:
>>>>>>>
>>>>>>>
>>>>>>>>C:\cms\build\jakarta-tomcat-4.0\bin\startup.bat
>>>>>>>>
>>>>>>>
>>>>>>>Point your favorite browser to http://localhost:8080
>>>>>>>(You should get the tomcat start page)
>>>>>>>
>>>>>>>Stop Tomcat:
>>>>>>>
>>>>>>>
>>>>>>>>C:\cms\build\jakarta-tomcat4.0\bin\shutdown.bat
>>>>>>>>
>>>>>>>
>>>>>>>2) Get and install Ant
>>>>>>>
>>>>>>>Download jakarta-ant from
>>>>>>>http://jakarta.apache.org/builds/jakarta-ant/nightly/
>>>>>>>Extract it to the directory "cms\build"
>>>>>>>
>>>>>>>
>>>>>>>3) Get Wyona
>>>>>>>
>>>>>>>choose a) or b)
>>>>>>>
>>>>>>>a) Download the newest wyona snapshot from
>>>>>>>http://www.wyona.org/download
>>>>>>>Extract it to the directory "cms\src\"
>>>>>>>
>>>>>>>rename this directory wyonacms:
>>>>>>>
>>>>>>>
>>>>>>>>move wyona-cms-2.1-dev-src-20020605123945 wyonacms (write the
>>>>>>>>actual name of your
>>>>>>>>
>>>>>>>
>>>>>>>downloaded file)
>>>>>>>
>>>>>>>b) Get wyonacms from the CVS Server
>>>>>>>
>>>>>>>1.Download WinCVS (v1.2) (homepage is http://www.wincvs.org/);
>>>>>>>2.Install it; 3.Start it; 4.Click on admin->commandline
>>>>>>>5.In "Enter a cvs line command" enter cvs -d
>>>>>>>
>>>>>>>:pserver:[email protected]:/repository checkout wyonacms
>>>>>>>
>>>>>>>(No password needed)
>>>>>>>6.If everything goes well, messages will start to appear in the log
>>>>>>>window; 7.Wait until you see "*****CVS exited normally with code
>>>>>>>0*****" in the log window; 8.The wyonacms source is now on your
>>>>>>>harddrive.
>>>>>>>Make shure the the downloaded "wyonacms" is in the directory
>>>>>>>"cms\src\"
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>4) Build Wyona
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>cd C:\cms\src\wyonacms
>>>>>>>>ant
>>>>>>>>
>>>>>>>
>>>>>>>5) Install Wyona for Development
>>>>>>>
>>>>>>>make a copy of build.properties.sample and name it: build.properties
>>>>>>>In this file you have to set "install.dir" and "cache.dir"
>>>>>>>as follows:
>>>>>>>install.dir=C:\/cms\/build\/jakarta-tomcat-4.0\/webapps\/wyona-cms
>>>>>>>cache.dir=C:\/cms\/build\/jakarta-tomcat-4.0\/work\/Standalone\/localh
>>>>>>>ost\/wyona-cms
>>>>>>>
>>>>>>>(Make shure, you write the matching name of your tomcat version)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>ant install
>>>>>>>>
>>>>>>>
>>>>>>>Check if install.dir and cache.dir worked.
>>>>>>>Go to the jakarta-tomcat-4.0 directory. In the webapps directory
>>>>>>>there must be a "wyona-cms" directory
>>>>>>>and another wyona-cms in the work\Standalone\localhost directory
>>>>>>>
>>>>>>>To allow class reloading insert the following line:
>>>>>>><Context path="/wyona-cms" docBase="wyona-cms" debug="0"
>>>>>>>reloadable="true" crossContext="true"/>
>>>>>>>into the file:
>>>>>>>C:\cms\build\jakarta-tomcat-4.0\conf\server.xml
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>6) Start Wyona
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>cd C:\cms\src\wyonacms
>>>>>>>>ant reset (This removes the files from the cache directory)
>>>>>>>>C:\cms\build\jakarta-tomcat-4.0\bin\startup.bat
>>>>>>>>
>>>>>>>
>>>>>>>Point your browser to:
>>>>>>>http://localhost:8080/wyona-cms/
>>>>>>>
>>>>>>>You should see the wyonacms start page.
>>>>>>>
>>>>>>>
>>>>>>> Notes -----
>>>>>>>
>>>>>>> 1) Overwrite
>>>>>>>
>>>>>>> Wyona is overwriting some Cocoon files:
>>>>>>> -sitemap.xmap
>>>>>>> The original Cocoon Sitemap is mounted from the Wyona Sitemap
>>>>>>> -cocoon.xconf
>>>>>>> In order to simplify development we use "synchron"
>>>>>>> -logkit.xconf
>>>>>>> We replaced DEBUG by ERROR
>>>>>>>
>>>>>>>
>>>>>>> 2) Reconfigure Ports
>>>>>>>
>>>>>>> 1) Tomcat port: TOMCAT\conf\server.xml (default: 8080)
>>>>>>> 2) Catalina port: TOMCAT\conf\server.xml (default: 8008)
>>>>>>> 3) Tomcat shutdown port: TOMCAT\conf\server.xml (default: 8005)
>>>>>>> 4) HypersonicSQL DB port(http://www.hsqldb.org):
>>>>>>>TOMCAT\webapps\wyona-cms\WEB-INF\cocoon.xconf (default: 9002)
>>>>>>>
>>>>>>> 3) Usefull informations for wyonacms
>>>>>>>
>>>>>>> The Cocoon site is good place to find information on all kinds
>>>>>>>of things:
>>>>>>> http://xml.apache.org/cocoon/
>>>>>>>
>>>>>>> http://www.wyona.org provides information on the wyonacms project
>>>>>>>
>>>>>>
>>>>>>_______________________________________________
>>>>>>WyonaCMS-dev mailing list
>>>>>>[email protected]
>>>>>>http://mail.wyona.org/cgi-bin/mailman/listinfo/wyonacms-dev
>>>>>>
>>>>>
>>>>>_______________________________________________
>>>>>WyonaCMS-dev mailing list
>>>>>[email protected]
>>>>>http://mail.wyona.org/cgi-bin/mailman/listinfo/wyonacms-dev
>>>>>
>>>>
>>>>------------------------------------------------------------------------
>>>>
>>>>==============================================================
>>>>
>>>>W Y O N A C O N T E N T - M A N A G E M E N T - S Y S T E M
>>>>
>>>>==============================================================
>>>>
>>>>Contents
>>>>--------
>>>>- Prerequisites
>>>>- Directory structure
>>>>- Installation-Notes
>>>>
>>>>
>>>>Prerequisites
>>>>-------------
>>>>
>>>>You need a tool to extract files
>>>>for example powerarchiver or winzip. You can get it from:
>>>>http://www.powerarchiver.com/download/
>>>>http://www.winzip.com
>>>>
>>>>You need to have installed jdk.
>>>>Point your favorite browser to http://java.sun.com Get the jdk and
>>>>install it in c:\
>>>>
>>>><comment>
>>>>I believe that java could be installed anywhere, and most people already
>>>>have java installed, so specifiying "c:/" seems confusing to me. I think
>>>>that you should just point out that "JDK should be installed, for details
>>>>see http://java.sun.com/" </comment>
>>>>
>>>>
>>>>Directory structure
>>>>-------------------
>>>>
>>>>make a directory "cms" and within this directory two others "build" and
>>>>"src" Put in your "cms\build" directory "Tomcat" and "Ant" (Description
>>>>follows) Put the wyona-cms in your "cms\src" directory (Description
>>>>follows)
>>>>
>>>>Installation
>>>>------------
>>>>1) Get, install, start, try and stop Tomcat
>>>>
>>>>Download jakarta-tomcat-4.0 or a newer version from
>>>>http://jakarta.apache.org/builds/ Extract it to the directory "cms\build"
>>>>
>>>>Start a dos window ant type:
>>>>( dos commands are marked with a > )
>>>>
>>>>
>>>>set ANT_HOME=c:\cms\build\jakarta-ant-1.4.1
>>>>set CATALINA_HOME=C:\cms\build\jakarta-tomcat-4.0
>>>>set JAVA_HOME=c:\jdk1.3.1_03
>>>>set PATH=%PATH%;%ANT_HOME%\bin
>>>>
>>>><comment>
>>>>I don't think that setting the environment variables in a DOS-Box is
>>>>pertinent in *real* windowses like NT, 2000, and XP. Instead go to
>>>>"Control Panel / System / Advanced / Environment Variables" (this is XP,
>>>>other wins might be slightly different) and set them there. Important:
>>>>close all DOS-Boxes *and* all Explorer windows, then reopen them to make
>>>>the new environment variables active.
>>>></comment>
>>>>
>>>>(Make shure you write the path according to your directory structure and
>>>>names)
>>>>
>>>><comment>
>>>>"sure", not "shure" :-)
>>>></comment>
>>>>
>>>>Start Tomcat:
>>>>
>>>>C:\cms\build\jakarta-tomcat-4.0\bin\startup.bat
>>>>
>>>><comment>
>>>>Getting Tomcat to start can sometimes be a little tiring, especially
>>>>because when you use startup.bat, Catalina will open in a new DOS-Box,
>>>>and if it does not start, this DOS-Box will be closed immediately, making
>>>>it impossible to read any error messages. Tip: use "catalina.bat run"
>>>>instead of "startup.bat" until you get Tomcat running correctly, this
>>>>won't open a new DOS-Box.
>>>></comment>
>>>>
>>>>Point your favorite browser to http://localhost:8080
>>>>(You should get the tomcat start page)
>>>>
>>>>Stop Tomcat:
>>>>
>>>>C:\cms\build\jakarta-tomcat4.0\bin\shutdown.bat
>>>>
>>>>
>>>>
>>>>
>>>>2) Get and install Ant
>>>>
>>>>Download jakarta-ant from
>>>>http://jakarta.apache.org/builds/jakarta-ant/nightly/ Extract it to the
>>>>directory "cms\build"
>>>>
>>>><comment>
>>>>Do you really want to use the nightly builds? Daring, I must say :-)
>>>></comment>
>>>>
>>>>3) Get Wyona
>>>>
>>>>choose a) or b)
>>>>
>>>>a) Download the newest wyona snapshot from http://www.wyona.org/download
>>>>Extract it to the directory "cms\src\"
>>>>
>>>>
>>>>rename this directory wyonacms:
>>>>
>>>>move wyona-cms-2.1-dev-src-20020605123945 wyonacms (write the actual name
>>>>of your downloaded file)
>>>>
>>>>b) Get wyonacms from the CVS Server
>>>>
>>>>1.Download WinCVS (v1.2) (homepage is http://www.wincvs.org/); 2.Install
>>>>it; 3.Start it; 4.Click on admin->commandline 5.In "Enter a cvs line
>>>>command" enter cvs -d :pserver:[email protected]:/repository
>>>>checkout wyonacms (No password needed)
>>>>6.If everything goes well, messages will start to appear in the log
>>>>window; 7.Wait until you see "*****CVS exited normally with code 0*****"
>>>>in the log window; 8.The wyonacms source is now on your harddrive.
>>>>Make shure the downloaded "wyonacms" is in the directory "cms\src\"
>>>>
>>>>
>>>>
>>>>4) Build Wyona
>>>>
>>>>
>>>>cd C:\cms\src\wyonacms
>>>>ant
>>>>
>>>>
>>>>
>>>>
>>>>5) Install Wyona for Development
>>>>
>>>>make a copy of build.properties.sample and name it: build.properties
>>>>In this file you have to set "install.dir" and "cache.dir"
>>>>as follows:
>>>>install.dir=C:\/cms\/build\/jakarta-tomcat-4.0\/webapps\/wyona-cms
>>>>cache.dir=C:\/cms\/build\/jakarta-tomcat-4.0\/work\/Standalone\/localhost
>>>>\/wyona-cms (Make shure, you write the matching name of your tomcat
>>>>version)
>>>>
>>>><comment>
>>>>Are you sure about the double slashes ("\/")? As far as I know, using
>>>>forward-slashes is enough, ant will translate them to backslahes if
>>>>needed. So you could write "C:/foo/bar" for paths on windows systems.
>>>>This works for sure.
>>>>Also, I don't remember the "Standalone" part of the cache directory. I
>>>>don't have Tomcat installed right now, if you need clarification on that,
>>>>pls let me know, and I will test. </comment>
>>>>
>>>>ant install
>>>>
>>>>
>>>>Check if install.dir and cache.dir worked.
>>>>Go to the jakarta-tomcat-4.0 directory. In the webapps directory there
>>>>must be a "wyona-cms" directory and another wyona-cms in the
>>>>work\Standalone\localhost directory
>>>>
>>>>To allow class reloading insert the following line:
>>>><Context path="/wyona-cms" docBase="wyona-cms" debug="0"
>>>>reloadable="true" crossContext="true"/> into the file:
>>>>C:\cms\build\jakarta-tomcat-4.0\conf\server.xml
>>>>
>>>>
>>>>
>>>>6) Start Wyona
>>>>
>>>>
>>>>cd C:\cms\src\wyonacms
>>>>ant reset (This removes the files from the cache directory)
>>>>C:\cms\build\jakarta-tomcat-4.0\bin\startup.bat
>>>>
>>>>
>>>>Point your browser to:
>>>>http://localhost:8080/wyona-cms/
>>>>
>>>>You should see the wyonacms start page.
>>>>
>>>>
>>>> Notes -----
>>>>
>>>> 1) Overwrite
>>>>
>>>> Wyona is overwriting some Cocoon files:
>>>> -sitemap.xmap
>>>> The original Cocoon Sitemap is mounted from the Wyona Sitemap
>>>> -cocoon.xconf
>>>> In order to simplify development we use "synchron"
>>>> -logkit.xconf
>>>> We replaced DEBUG by ERROR
>>>>
>>>>
>>>> 2) Reconfigure Ports
>>>>
>>>> 1) Tomcat port: TOMCAT\conf\server.xml (default: 8080)
>>>> 2) Catalina port: TOMCAT\conf\server.xml (default: 8008)
>>>> 3) Tomcat shutdown port: TOMCAT\conf\server.xml (default: 8005)
>>>> 4) HypersonicSQL DB port(http://www.hsqldb.org):
>>>>TOMCAT\webapps\wyona-cms\WEB-INF\cocoon.xconf (default: 9002)
>>>>
>>>><comment>
>>>>I don't understand this information. Why is this needed?
>>>></comment>
>>>>
>>>> 3) Usefull informations for wyonacms
>>>>
>>>> The Cocoon site is good place to find information on all kinds of
>>>>things: http://xml.apache.org/cocoon/
>>>>
>>>> http://www.wyona.org provides information on the wyonacms project
>>>>
>>>
>>>_______________________________________________
>>>WyonaCMS-dev mailing list
>>>[email protected]
>>>http://mail.wyona.org/cgi-bin/mailman/listinfo/wyonacms-dev
>>>
>>
>
>
>
>
> _______________________________________________
> WyonaCMS-users mailing list
> [email protected]
> http://mail.wyona.org/cgi-bin/mailman/listinfo/wyonacms-users
>
>
> ------------------------------------------------------------------------
>
> ==============================================================
>
> W Y O N A C O N T E N T - M A N A G E M E N T - S Y S T E M
>
> ==============================================================
>
> Contents
> --------
> - Prerequisites
> - Directory structure
> - Installation-Notes
>
>
> Prerequisites
> -------------
>
> You need a tool to extract files
> for example powerarchiver or winzip. You can get it from:
> http://www.powerarchiver.com/download/
> http://www.winzip.com
>
> You need to have installed jdk.
> Point your favorite browser to http://java.sun.com Get the jdk and install it.
>
>
> Directory structure
> -------------------
>
> make a directory "cms" and within this directory two others "build" and "src"
> Put in your "cms\build" directory "Tomcat" and "Ant" (Description follows)
> Put the wyona-cms in your "cms\src" directory (Description follows)
>
>
> Installation
> ------------
> 1) Get, install, start, try and stop Tomcat
>
> Download jakarta-tomcat-4.0 or a newer version from http://jakarta.apache.org/builds/
> Extract it to the directory "cms\build"
>
>
> Set your environment variables
> Go to:
> Control Panel / System / Advanced / Environment Variables
>
> ANT_HOME path to "jakarta-ant"
> CATALINA_HOME path to "jakarta-tomcat"
> JAVA_HOME path to "jdk"
> PATH %PATH%;%ANT_HOME%\bin
>
> (Make sure you write the path according to your directory structure and names)
>
>
> Start Tomcat:
>
> Start a dos window:
> ( dos commands are marked with a > )
>
>>path to "jakarta-tomcat"\bin\startup.bat
>
> Tip: use "catalina.bat run" instead of "startup.bat" until you get Tomcat running correctly, this won't open a new dos-box.
>
>
>
> Point your favorite browser to http://localhost:8080
> (You should get the tomcat start page)
>
> Stop Tomcat:
>
>
>>path to "jakarta-tomcat"\bin\shutdown.bat
>
>
>
>
>
> 2) Get and install Ant
>
> Download jakarta-ant from http://jakarta.apache.org/builds/jakarta-ant/
> Extract it to the directory "cms\build"
>
>
> 3) Get Wyona
>
> choose a) or b)
>
> a) Download the newest wyona snapshot from http://www.wyona.org/download
> Extract it to the directory "cms\src\"
>
>
> rename this directory wyonacms:
>
>
>>move wyona-cms-2.1-dev-src-20020605123945 wyonacms (write the actual name of your
>
> downloaded file)
>
> b) Get wyonacms from the CVS Server
>
> 1.Download WinCVS (v1.2) (homepage is http://www.wincvs.org/); 2.Install it; 3.Start it; 4.Click on admin->commandline
> 5.In "Enter a cvs line command" enter cvs -d :pserver:[email protected]:/repository checkout wyonacms
> (No password needed)
> 6.If everything goes well, messages will start to appear in the log window;
> 7.Wait until you see "*****CVS exited normally with code 0*****" in the log window;
> 8.The wyonacms source is now on your harddrive.
> Make shure the downloaded "wyonacms" is in the directory "cms\src\"
>
>
>
> 4) Build Wyona
>
>
>
>>cd C:\cms\src\wyonacms
>>ant
>
>
>
>
>
> 5) Install Wyona for Development
>
> make a copy of build.properties.sample and name it: build.properties
> In this file you have to set "install.dir" and "cache.dir"
> as follows:
> install.dir=C:/cms/build/jakarta-tomcat-4.0/webapps/wyona-cms
> cache.dir=C:/cms/build/jakarta-tomcat-4.0/work/Standalone/localhost/wyona-cms
> (Make sure, you write the appropriate path)
>
> <comment>
> Also, I don't remember the "Standalone" part of the cache directory. I don't have Tomcat installed
> right now, if you need clarification on that, pls let me know, and I will test.
> </comment>
>
> ant install
>
>
> Check if install.dir and cache.dir worked.
> Go to the jakarta-tomcat-4.0 directory. In the webapps directory there must be a "wyona-cms" directory
> and another wyona-cms in the work\Standalone\localhost directory
>
> To allow class reloading insert the following line:
> <Context path="/wyona-cms" docBase="wyona-cms" debug="0" reloadable="true" crossContext="true"/>
> into the file:
> C:\cms\build\jakarta-tomcat-4.0\conf\server.xml
>
>
>
> 6) Start Wyona
>
>
>
>>cd C:\cms\src\wyonacms
>>ant reset (This removes the files from the cache directory)
>>C:\cms\build\jakarta-tomcat-4.0\bin\startup.bat
>
>
>
> Point your browser to:
> http://localhost:8080/wyona-cms/
>
> You should see the wyonacms start page.
>
>
> Notes
> -----
>
> 1) Overwrite
>
> Wyona is overwriting some Cocoon files:
> -sitemap.xmap
> The original Cocoon Sitemap is mounted from the Wyona Sitemap
> -cocoon.xconf
> In order to simplify development we use "synchron"
> -logkit.xconf
> We replaced DEBUG by ERROR
>
>
> 2) Reconfigure Ports (if you want to run two or more tomcat at the same time, you can change the following ports)
>
> 1) Tomcat port: TOMCAT\conf\server.xml (default: 8080)
> 2) Catalina port: TOMCAT\conf\server.xml (default: 8008)
> 3) Tomcat shutdown port: TOMCAT\conf\server.xml (default: 8005)
> 4) HypersonicSQL DB port(http://www.hsqldb.org): TOMCAT\webapps\wyona-cms\WEB-INF\cocoon.xconf (default: 9002)
>
>
>
> 3) Usefull informations for wyonacms
>
> The Cocoon site is good place to find information on all kinds of things:
> http://xml.apache.org/cocoon/
>
> http://www.wyona.org provides information on the wyonacms project
>