ContextLister unbinded one service from jacORBNamingService

##
##  JacORB configuration options
##

########################################
#                                      #
#   Initial references configuration   #
#                                      #
########################################

#
# URLs where IORs are stored (used in orb.resolve_initial_service())
# DO EDIT these! (Only those that you are planning to use,
# of course ;-).
#
# The ORBInitRef references are created on ORB startup time. In the
# cases of the services themselves, this may lead to exceptions being
# displayed (because the services aren't up yet). These exceptions
# are handled properly and cause no harm!

ORBInitRef.NameService=corbaloc:iiop:127.0.0.1:20900/NameService

########################################
#                                      #
#      Export of corbaloc IORs         #
#                                      #
########################################

# allow for more readable corbaloc URLs by mapping the
# actual object key to an arbitrary string. The mapping
# below would permit clients of a name service to
# access it using corbaloc::ipaddress:portnum/NameService
# Note: it is NOT necessary to define this property for
# the name service here because this is done already in the
# code of the ns implementation.
# This mapping can be altered programatically by the proprietary
# function ORB::addObjectKey(NameService, file:/home/rnc/NameSingleton.ior)
#
# The property also accepts the following mappings:
# IOR, resource, jndi, URL (e.g. file, http)
# examples:
# jacorb.orb.objectKeyMap.NameService=StandardNS/NameServer-POA/_root
# jacorb.orb.objectKeyMap.NameService=file:/home/rnc/NameSingleton.ior

##################################
#                                #
#   ORB version number output    #
#                                #
##################################

# if on, the ORB's version number and a copyright statement is printed
# any time the ORB is initialized
jacorb.orb.print_version=on

# the logger used to print out the version number
# should always be set at least to INFO level otherwise
# nothing will be printed out
jacorb.orb.print_version.log.verbosity = 3

##################################
#                                #
#  Default Logging configuration #
#                                #
##################################

# Name of the factory class that plugs in a given log kit
# The default value is JacORB's own factory for the Apache
# LogKit. Only edit (or uncomment) if you want a different
# log kit.
#jacorb.log.loggerFactory=org.jacorb.util.LogKitLoggerFactory

# log levels:
#
# 0 = fatal errors only = "almost off" (FATAL ERRORS)
# 1 = non-fatal errors and exceptions (ERROR)
# 2 = important messages (WARN)
# 3 = informational messages and exceptions (INFO)
# 4 = debug-level output (DEBUG) (may confuse the unaware user :-)
# NOTE: the name of this property has changed from jacorb.verbosity!!
jacorb.log.default.verbosity=2

# where does output go? Terminal is default
#jacorb.logfile=LOGFILEPATH

# logfilename used by the singleton ORB
# a timestamp and the suffix .log will be appended
#jacorb.logfile.singleton=orbsingleton

# If logging to file whether to append to existing file or overwrite
jacorb.logfile.append=off

# If jacorb.logfile.append is on, set rolling log size in kilobytes.
# A value of 0 implies no rolling log
jacorb.logfile.maxLogSize=0

# LogPattern
# This configure the logging pattern. For the format see
# http://excalibur.apache.org/apidocs/org/apache/log/format/PatternFormatter.html
jacorb.log.default.log_pattern=[%.20{category}] %.7{priority} : %{message}\\n%{throwable}

# hexdump outgoing messages
jacorb.debug.dump_outgoing_messages=off

# hexdump incoming messages
jacorb.debug.dump_incoming_messages=off

jacorb.util.tpool.log.verbosity=0

##################################################
#                                                #
#    WARNING: The following properties should    #
#    only be edited by the expert user. They     #
#    can be left untouched in most cases!        #
#                                                #
##################################################



################################
#                              #
#   Basic ORB Configuration    #
#                              #
################################

# the GIOP minor version number to use for newly created IORs
jacorb.giop_minor_version=2

# number of retries if connection cannot directly be established
jacorb.retries=5

# how many msecs. do we wait between retries
jacorb.retry_interval=500

# log2 of maximum buffer size managed by the internal
# buffer manager.
#
# This is NOT the maximum buffer size that
# can be used, but just the largest size of buffers that
# will be kept and managed. This value will be added to
# an internal constant of 5, so the real value in bytes
# is 2**(5+maxManagedBufSize-1). You only need to increase this
# value if you are dealing with LOTS of LARGE data structures.
# You may decrease it to make the buffer manager release large
# buffers immediately rather than keeping them for later
# reuse.
jacorb.maxManagedBufSize=18

# If this value is 0 an extra unlimited size buffer cache is created
# for the CDROutputStreams. If this value is > 0 then the cache will
# be purged every x msecs. If this value is -1 no caching of these
# buffers will take place. This will reduce memory footprint at the
# cost of decreased performance handling large data structures.
# This value defaults to 0 if not set.
jacorb.bufferManagerMaxFlush=0

# Normally, a jacorb server will close the TCP/IP connection right
# after sending a CloseConnection message. However, it may
# occasionally happen that the client sends a message into the closed
# connection because it hasn't handled the CloseConnection yet. To
# avoid this situation, closing of the TCP/IP connection can be delayed.
#jacorb.connection.delay_close=on
#jacorb.connection.timeout_after_closeconnection=20000

# Initial timeout for establishing a connection.
jacorb.connection.client.connect_timeout=5000

# Wait the specified number of msecs for a reply to a request. If
# exceeded, a org.omg.CORBA.TIMEOUT exception will be thrown
jacorb.connection.client.pending_reply_timeout=3600000

# client-side connection idle timeout, set to a non-zero value to close the
# connection after so many msecs. Only connections that don't have pending
# messages are closed, unless
# jacorb.connection.client.timeout_ignores_pending_messages is turned on.
#jacorb.connection.client.idle_timeout=0

# shall the orb ignore pending messages when a connection idle timeout is
# detected? If "on", the connection is closed regardless of any pending
# messages, and all pending messages are cancelled (resulting in a
# COMM_FAILURE, unless jacorb.connection.client.retry_on_failure is turned
# on). Default is "off"
#jacorb.connection.client.timeout_ignores_pending_messages=off

# whenever a network failure is detected, the orb can either
# (infinitely) retry all pending requests, or propagate a COMM_FAILURE
# back into the client code. Default is "off", i.e. throw a
# COMM_FAILURE. Note that this should only be used with idempotent operations
# because the client side orb has no way of knowing the processing state of
# the lost request on the server.
#jacorb.connection.client.retry_on_failure=off

# max time (msecs) a server keeps a connection open if nothing happens
#jacorb.connection.server.timeout=10000

# because JacORB uses blocking network IO, it assigns a thread to each
# connection to listen and read messages. Threads are taken from a thread pool
# that can be configured with these following properties. max_receptor_threads
# is equal to the number of connections that can be serviced
# simultaneously. When all threads are in use, new connections can still be
# opened or accepted, but will not be listened on.
#jacorb.connection.client.max_idle_receptor_threads=5
#jacorb.connection.client.max_receptor_threads=1000
#jacorb.connection.server.max_idle_receptor_threads=5
#jacorb.connection.server.max_receptor_threads=1000

# Max no of accepted connections on the server. Only effective in conjunction
# with the next four properties. Please see section 15.2 "Connection
# Management" in the ProgrammingGuide
#jacorb.connection.max_server_connections=

# The class name of the SelectionStrategy class
#jacorb.connection.selection_strategy_class=

# The class name of the StatisticsProvider class
#jacorb.connection.statistics_provider_class=

# The number of msecs that are waited until the next attempt to find
# an idle connection is made (i.e. do not continuously spin)
#jacorb.connection.wait_for_idle_interval=500

# Sets keep-alive on server sockets. If the OS keepalive detects a TCP/IP
# connection to be broken, the effect is the same as if the TCP/IP connection
# has been closed gracefully.
jacorb.connection.server.keepalive=on

# Sets keep-alive on client sockets. If the OS keepalive detects a TCP/IP
# connection to be broken, the effect is the same as if the TCP/IP connection
# has been closed gracefully. All pending replies will receive a
# COMM_FAILURE.
jacorb.connection.client.keepalive=on

#jacorb.reference_caching=off

# Sets a timeout on the (SSL) server socket. This is a workaround for JDK 1.3
# on linux where a thread blocked on accept() isn't notified when closing that
# socket. See Java bug #4344135. NOTE: This is only useful in conjunction with
# the SI&C SSL socket factories.
#jacorb.listener.server_socket_timeout=0

#
# The following property specifies the class which is used for
# reference caching. WeakHashtable uses WeakReferences, so entries
# get gc'ed if only the Hashtable has a reference to them. This
# is useful if you have many references to short-living non-persistent
# CORBA objects. It is only available for java 1.2 and above.
#
# On the other hand the standard Hashtable keeps the references until
# they are explicitely deleted by calling _release(). This is useful
# for persistent and long-living CORBA objects.
#
#jacorb.hashtable_class=org.jacorb.util.WeakHashtable
#
jacorb.hashtable_class=java.util.Hashtable

# use GIOP 1.2 byte order markers (since CORBA 2.4-5)
jacorb.use_bom=off

# add additional IIOP 1.0 profiles even if we are using IIOP 1.2
jacorb.giop.add_1_0_profiles=off

# Use DNS names in IORs
jacorb.dns.enable=off

# Compact Typecodes (0 - off, 1 - partial (not member_names), 2 - all)
jacorb.compactTypecodes=0

# Cache typecode on read
jacorb.cacheTypecodes=off

# Cache poa names
jacorb.cachePoaNames=off

# Control if errors caused by an ORBInitializer (thrown exceptions or failure
# to build class) will make ORB.init() fail or not. On failure, a
# org.omg.CORBA.INITIALIZE exception will be thrown.
#jacorb.orb_initializer.fail_on_error=off

# A listener to receive a callback when the acceptor thread caught an
# exception. The default JacORB implementation will shutdown the ORB on all
# Errors and SSLExceptions (e.g. but not on IOExceptions)
jacorb.acceptor_exception_listener=org.jacorb.orb.listener.DefaultAcceptorExceptionListener

# If set to on this results in extra information being added to the
# thread name i.e. connection endpoints and date/time thread started
# processing - Server_TCP_IP_Transport only.
jacorb.enhanced_thread_name=off

# If this is set to a class implementing org.jacorb.orb.IORMutator
# then this will be used to mutate incoming/outgoing Objects
#jacorb.iormutator=

# If true enable codesets. If false, this will ignore all codesetComponentInfo profiles
# within an IOR and also disable explicit marshalling with codesets (re Strings).
# jacorb.codeset=off

# Overrides the detection from the local environment for the codeset used to
# transmit characters. Note that this property is only effective once per JVM.
# jacorb.native_char_codeset=ISO8859_1

# Overrides the detection from the local environment for the codeset used to
# transmit wide characters. ote that this property is only effective once per JVM.
# jacorb.native_wchar_codeset=UTF16


###########################################
#                                         #
#         Interoperability                #
#                                         #
###########################################

# Turn off indirection encoding for repeated typecodes. This fixes
# interoperability with certain broken ORB's eg. Orbix2000
jacorb.interop.indirection_encoding_disable=on

# Iona Comet CORBA/COM bridge can incorrectly encode buffer lengths.
# Enabling this property adds additional length checking and adjustment
# for interoperability with Comet.
jacorb.interop.comet=off

# Some ORBs (e.g. VisiBroker, ORBacus) do not set a byte value of 1
# as a CDR encoded boolean true value. Enabling this property interprets
# any non zero CDR encoded boolean value as true.
jacorb.interop.lax_boolean_encoding=on

# Control whether the method create_abstract_interface_tc performs
# a validity check on the name parameter or not. Turning this check
# off circumvents a bug in Sun's implementation of javax.rmi.CORBA.ValueHander,
# which occasionally passes an invalid name (an empty string) to
# ORBSingleton.create_abstract_interface_tc. If you are using RMI valuetypes,
# you should turn this property off.
jacorb.interop.strict_check_on_tc_creation=on

# Custom-marshalled RMI valuetypes should be encoded as chunks, but some
# ORBs are not able to decode chunked values. Disable this property for
# interoperability with the ORB in Sun's JDK 1.4.2.
jacorb.interop.chunk_custom_rmi_valuetypes=on

# RMI/IIOP data encoded as chunks should contain the length
# of the chunk. the sun orb does not send the length
# always.
# enable this property for interoperability with the Sun ORB.
# http://lists.spline.inf.fu-berlin.de/mailman/htdig/jacorb-developer/2006-May/008251.html
jacorb.interop.sun=off

###########################################
#                                         #
#         Socket Factories                #
#                                         #
###########################################

# A factory design pattern is used for the creation of sockets and server
# sockets.
# The jacorb.net.socket_factory property can be used to configure
# a socket factory that must implement the operations defined in the
# interface org.jacorb.orb.factory.SocketFactory.
# The jacorb.net.server_socket_factory property can be used to configure a
# server socket factory that must implement the operations defined in the
# interface org.jacorb.orb.factory.ServerSocketFactory.
#
#jacorb.net.socket_factory=org.jacorb.orb.factory.DefaultSocketFactory
#jacorb.net.server_socket_factory=org.jacorb.orb.factory.DefaultServerSocketFactory
#jacorb.net.socket_factory=org.jacorb.orb.factory.PortRangeSocketFactory
#jacorb.net.server_socket_factory=org.jacorb.orb.factory.PortRangeServerSocketFactory
#
# Additional socket factores are supported that allow for the configuration
# of maximum and minimum port numbers that can be used. This can be used to
# enable firewall traversal via a fixed port range. To use these socket factories
# configure one or both of the following property pairs. The first property pair
# configures the client socket factory and the second pair the server socket
# factory.
#
#jacorb.net.socket_factory.port.min
#jacorb.net.socket_factory.port.max
#jacorb.net.server_socket_factory.port.min
#jacorb.net.server_socket_factory.port.max

# Listeners
# The TCP listener listens for TCP socket connections and should be implemented
# as defined by org.jacorb.orb.listener.TCPConnectionListener
jacorb.net.tcp_listener=

###########################################
#                                         #
#         BiDirectional GIOP              #
#                                         #
###########################################

# uncomment this initializer if you want to use BiDirectional GIOP

#org.omg.PortableInterceptor.ORBInitializerClass.bidir_init=org.jacorb.orb.giop.BiDirConnectionInitializer


###########################################
#                                         #
#       Proxy address in IOR              #
#                                         #
###########################################

#
# Some times it is necessary to present an endpoint alias in an IOR
# to allow clients outside a firewall to get a connection to a server
# that is behind a NAT'ing firewall.
#
# WARNING: this is just "dumb" replacing, so you
# have to take care of your configuration!
#

# The general form of this address is <protocol key>://<address>
# The protocol key in the address must match the protocol(s) used by
# the server. See the section on configuring Transport Factories for
# information on loading specific protocols.
#jacorb.ior_proxy_address=iiop://1.2.3.4:4711

# Deprecated IIOP-specific form:
# with these two properties it is possible to
# tell the ORB what IP/port IORs should contain,
# if the ServerSockets IP/port can't be used
# (e.g. for traffic through a firewall).
#
# WARNING: this is just "dumb" replacing, so you
# have to take care of your configuration!
#

#jacorb.ior_proxy_host=1.2.3.4
#jacorb.ior_proxy_port=4711

###########################################
#                                         #
#   The Object Adapter Internet Address   #
#                                         #
###########################################

# IP address on multi-homed host (this gets encoded in
# object references). NOTE: Adresses like 127.0.0.X
# will only be accessible from the same machine!
#OAIAddr=1.2.3.4
#OAPort=4711

# A new protocol-independent configuration is available
# for use to configure an explicit endpoint using IIOP or
# other protocols.
#OAAddress=iiop://1.2.3.4:4711

############################
#                          #
#   Default Interceptors   #
#   Please leave them in!  #
#                          #
############################
org.omg.PortableInterceptor.ORBInitializerClass.standard_init=org.jacorb.orb.standardInterceptors.IORInterceptorInitializer



###############################################
#                                             #
#   Implementation Repository Configuration   #
#                                             #
###############################################
# Switch off to avoid contacting the ImR on every server start-up
jacorb.use_imr=off

# Switch off if you don't want to write the ImR address into server IORs
# (ignored if jacorb.use_imr=off)
jacorb.use_imr_endpoint=on

# if set to "on", servers that don't already have an entry on their
# first call to the imr, will get automatically registered. Otherwise,
# an UnknownServer exception is thrown.
jacorb.imr.allow_auto_register=off

# if set to "on", the imr will try to "ping" every object reference,
# that it is going to return. If the reference is not alive, TRANSIENT
# is thrown.
jacorb.imr.check_object_liveness=off

ORBInitRef.ImplementationRepository=http://www.x.y.z/~user/ImR_Ref

jacorb.imr.table_file=Z:\table.dat
jacorb.imr.backup_file=z:\backup.dat
jacorb.imr.ior_file=/home/bwana/brose/public_html/ImR_Ref
# Time (msecs) that the implementation will wait for a started server to register.
jacorb.imr.timeout=

# Host for ImR endpoint
jacorb.imr.endpoint_host=
# Port number for IMR endpoint
jacorb.imr.endpoint_port_number=

# how many millisecs should the imr wait, until a connection from an
# application client is terminated. Default is 2000.
jacorb.imr.connection_timeout=2000

# the implementation name, should be set to a different
# name in the code of persistent servers
# jacorb.implname=StandardImplName

#
# This is supposed to be a generic startup string for everything
# that calls Runtime.exec(). Might be replaced by jaco[.bat].
#
jacorb.java_exec=java -Dorg.omg.CORBA.ORBClass=org.jacorb.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=org.jacorb.orb.ORBSingleton

# with these two properties it is possible to
# tell the ORB what IP / hostname  and port the IMR IOR and IMRified server IORs should
# contain,  if the ServerSockets IP/port can't be used
# (e.g. for traffic through a firewall).
#
# WARNING: this is just "dumb" replacement, so you
# have to take care of your configuration!
#
#jacorb.imr.ior_proxy_host=1.2.3.4
#jacorb.imr.ior_proxy_port=4711

# protocol-independent form for assigning imr proxy endpoint
#jacorb.imr.ior_proxy_address=iiop://1.2.3.4:4711

#########################
#                       #
#   SSL Configuration   #
#                       #
#########################

#
# The port number used by SSL, will be dynmically assigned
# by default
#

#OASSLPort=4711

# This interceptor must be set if programs need access to
# certificates using the CORBA Security API, SSL works also
# without this interceptor

#org.omg.PortableInterceptor.ORBInitializerClass.ForwardInit=org.jacorb.security.ssl.SecurityServiceInitializer

# qualified classname of access decision object
jacorb.security.access_decision=org.jacorb.security.level2.AccessDecisionImpl

# list of qualified classnames of principal authenticator objects,
# separated by commas (no whitespaces!). The first entry (that can
# be successfully created) will be available through the
# principal_authenticator property.
jacorb.security.principal_authenticator=org.jacorb.security.level2.PrincipalAuthenticatorImpl

# the qualified classname of the ssl socket factory class
jacorb.ssl.socket_factory=org.jacorb.security.ssl.sun_jsse.SSLSocketFactory

# the qualified classname of the ssl server socket factory class
jacorb.ssl.server_socket_factory=org.jacorb.security.ssl.sun_jsse.SSLServerSocketFactory

# IIOP/SSL parameters (numbers are hex values, without the leading "0x"):
# NoProtection = 1
# EstablishTrustInClient = 40
# EstablishTrustInTarget = 20
# mutual authentication = 60
# please see the programming guide for more explanation

jacorb.security.support_ssl=off

jacorb.security.ssl.client.supported_options=0
jacorb.security.ssl.client.required_options=0

jacorb.security.ssl.server.supported_options=0
jacorb.security.ssl.server.required_options=0

#
# If set, the following two values will be placed in the IOR, if
# "corbaloc:ssliop" ssliop.
#
# If not set, only EstablishTrustInTarget is used for both supported
# and required options. EstablishTrustInClient is not set, and the
# rest of the Association Options aren't currently used anyway.
#jacorb.security.ssl.corbaloc_ssliop.supported_options=0
#jacorb.security.ssl.corbaloc_ssliop.required_options=0

# The name and location of the keystore. This may be absolute or
# relative to the home directory, or a file retrievable through the
# classloader.
#
# NOTE (for Sun JSSE users): The "javax.net.ssl.trustStore[Password]"
# properties don't seem to take effect, so you may want to add trusted
# certificates to "normal" keystores. In this case, please set the
# property "jacorb.security.jsse.trustees_from_ks"is to "on", so trusted
# certificates are taken from the keystore instead of a dedicated
# truststore.
jacorb.security.keystore=
jacorb.security.keystore_password=

#
# Sun JSSE specific settings
#
# Use the keystore to take trusted certs from.
jacorb.security.jsse.trustees_from_ks=off

# A comma-separated (no whitespaces!) list of cipher suite names. See
# the JSSE docs on how to obtain the correct cipher suite strings
jacorb.security.ssl.server.cipher_suites=
jacorb.security.ssl.client.cipher_suites=

# A comma seperated list of the names of the protocols to be set enabled on
# the SSL socket.  See the JSSE documentation for
# javax.net.ssl.SSLSocket#setEnabledProtocols()
# NOTE: Does only apply to jdk1.4 and above
#jacorb.security.ssl.client.protocols=
#jacorb.security.ssl.server.protocols=

# A user defined javax.net.ssl.TrustManager implemementation class name.
# Will be used to intialise the SSLContext. See JSSE docs for javax.net.ssl.SSLContext#init().
# Must be capable of instantiation via a no arg constructor.
#jacorb.security.ssl.client.trust_manager=my.trust.Manager
#jacorb.security.ssl.server.trust_manager=my.trust.Manager

# Class name for a class that implements JacORB JSRandom interface. This
# will be used to get a SecureRandom.
jacorb.security.randomClassPlugin=

# Listeners
# The SSL listener listens for SSL sessions and should be implemented as defined
# by org.jacorb.orb.listener.SSLSessionListener
jacorb.security.ssl.ssl_listener=

#########################
#                       #
#   POA Configuration   #
#                       #
#########################

# displays a GUI monitoring tool for servers
jacorb.poa.monitoring=off

# POA log levels:
# 0 = fatal errors only = "almost off" (FATAL ERRORS)
# 1 = non-fatal errors and exceptions (ERROR)
# 2 = important messages (WARN)
# 3 = informational messages and exceptions (INFO)
# 4 = debug-level output (DEBUG) (may confuse the unaware user :-)
jacorb.poa.log.verbosity=3

# thread pool configuration for request processing
jacorb.poa.thread_pool_max=32
jacorb.poa.thread_pool_min=12

# If set then use shared thread pool amongst all the POAs.  Only used with
# ORB_CTRL_MODEL.
# jacorb.poa.thread_pool_shared = off

# if set, request processing threads in thePOA
# will run at this priority. If not set or invalid,
# MAX_PRIORITY will be used.
#jacorb.poa.thread_priority=

# Properties controlling the POA's request queue.  If queue_wait is off,
# then if there are more than queue_max requests in the queue, the
# client gets TRANSIENT exceptions for any requests.  If queue_wait is on,
# then the call blocks at the server side until no more than queue_min
# requests are left in the queue.  The new request is then delivered as usual.
jacorb.poa.queue_wait=off
jacorb.poa.queue_max=1024
jacorb.poa.queue_min=512

# Set this to on for server-side checking of expired ReplyEndTimePolicy.
# (This also applies to RelativeRoundtripTimeoutPolicy.)  When this is on,
# the clocks of the server and client machine need to be synchronized.
#jacorb.poa.check_reply_end_time=off


###################################
#                                 #
#  Transport Layer Configuration  #
#                                 #
###################################

# Names of the factories classes for all installed transport plug-ins
# (comma-separated list).

#jacorb.transport.factories=org.jacorb.orb.iiop.IIOPFactories

# ProfileId tags of all installed transports that should actually
# listen on the server side.  This is a comma-separated list of numbers,
# each number must correspond to one ProfileId tag from a factory in
# jacorb.transport.factories.  In IORs produced by the server, the transport
# profiles will appear in the order indicated by this list.

#jacorb.transport.server.listeners=0

# Name of a class that selects the transport profile to use on the
# client side.

#jacorb.transport.client.selector=org.jacorb.orb.DefaultProfileSelector


##################################
#                                #
#   Name Service Configuration   #
#                                #
##################################

# log levels:
# 0 = fatal errors only = "almost off" (FATAL ERRORS)
# 1 = non-fatal errors and exceptions (ERROR)
# 2 = important messages (WARN)
# 3 = informational messages and exceptions (INFO)
# 4 = debug-level output (DEBUG) (may confuse the unaware user :-)

jacorb.naming.log.verbosity=3

#
# name of the logger factory. Implement your own subclass of
# org.jacorb.util.LoggerFactory and enter class name here to
# customize logging behavior. Built-in default is org.jacorb.util.LogKitLoggerFactory
#jacorb.log.loggerFactory=

# Whether non active references are purged from name service
# when list operation is invoked.

jacorb.naming.purge=on

# Whether resolve should return references without trying to
# ping them to see if they're still alive first.

jacorb.naming.noping=on

# The file where the name server drops its IOR
jacorb.naming.ior_filename=/tmp/ior_file


########################################################
#                                                      #
#   Notification Service configuration, please see     #
#   the JacORB ProgrammingGuide for a explanation      #
#                                                      #
########################################################

jacorb.notification.filter.thread_pool_size = 32

jacorb.notification.proxyconsumer.thread_pool_size = 2

# made from 4 to 32 assuming clients assuming 30 clients,NMS,TMF and extra 4
jacorb.notification.proxysupplier.thread_pool_size = 36

jacorb.notification.supplier.poll_intervall = 1000

jacorb.notification.max_batch_size = 1

jacorb.notification.max_events_per_consumer = 2048 

jacorb.notification.order_policy = FifoOrder

jacorb.notification.discard_policy = FifoOrder

jacorb.notification.consumer.backout_interval = 5000

jacorb.notification.consumer.error_threshold = 1

# valid values: ThreadPool, ThreadPerProxy
jacorb.notification.proxysupplier.threadpolicy = ThreadPool

jacorb.notification.default_filter_factory = builtin

# jacorb.notification.supplier.max_number = 10

jacorb.notification.start_time_supported = off

jacorb.notification.stop_time_supported = on

jacorb.notification.proxy.destroy_causes_disconnect = on

# Notification Service log levels:
org.jacorb.notification.log.verbosity = 3

########################################
#                                      #
#   SAS configuration                  #
#                                      #
########################################

jacorb.SAS.log.verbosity=INFO
jacorb.SAS.CSS.log.verbosity=INFO
jacorb.SAS.TSS.log.verbosity=INFO

# This option defines the specific SAS context generator/validator
# Currently supported contexts include:
#    NullContext       - Sends a NULL SAS Context
#    GssUpContext      - Uses GSSUP security
#    KerberosContext   - uses Kerberos security
# At least one context must be selected for SAS support
#jacorb.security.sas.contextClass=org.jacorb.security.sas.NullContext
#jacorb.security.sas.contextClass=org.jacorb.security.sas.GssUpContext
#jacorb.security.sas.contextClass=org.jacorb.security.sas.KerberosContext

# This initializer installs the SAS interceptors
# Comment out this line if you do not want SAS support
#org.omg.PortableInterceptor.ORBInitializerClass.SAS=org.jacorb.security.sas.SASInitializer

# This option is used for GSSUP security and sets up the GSS Provider
# Comment out this line if you are not using GSS UP authentication
#org.omg.PortableInterceptor.ORBInitializerClass.GSSUPProvider=org.jacorb.security.sas.GSSUPProviderInitializer

########################################
#                                      #
#   Custom configuration               #
#                                      #
########################################


# any other custom properties can be added here.
#Enable Garbage Collection for Filters
#jacorb.notification.filter.dead_interval=10000
#jacorb.notification.enable_gc=true

#runGCDuringDeactivation typically when client gets disconnected or on abrupt termination
jacorb.notification.servant.deactivate.run_system_gc=on

##
##  Common JacORB configuration options (template file)
##
##  This <common.orb.properties> file should be in JRE/lib 
##  or in user.home
##
##  These can be overwritten by ORB-specific properties
##  files, by custum properties files, or in the code.
##
##  Generally, any property can go into any of these config
##  files, but as a rule of thumb you should not include 
##  services-specific options in this file, except for a
##  default naming service

########################################
#
# options to control the configuration stage
#
########################################

# where to look for ORB config files?
jacorb.config.dir=/opt/ems/release/data/conf

# controls log output (to the console!) during the configuration stage.
# This can help to find out which config files are actually loaded!
#    0   : nothing is logged
#    1,3 : only errors
#    3,4 : info (which config files were loaded)
jacorb.config.log.verbosity=0

########################################
#                                      #
#   Initial references configuration   #
#                                      #
########################################

#
# URLs where IORs are stored (used in orb.resolve_initial_service())
# DO EDIT these! (Only those that you are planning to use,
# of course ;-).
#
# The ORBInitRef references are created on ORB startup time. In the
# cases of the services themselves, this may lead to exceptions being
# displayed (because the services aren't up yet). These exceptions
# are handled properly and cause no harm!

#ORBInitRef.NameService=corbaloc::160.45.110.41:38693/StandardNS/NameServer-POA/_root
#ORBInitRef.NameService=corbaloc::falcon:7001/NameService

#ORBInitRef.NameService=file:/y:/nsiona.ref
#ORBInitRef.NameService=file:/c:/NS_Ref
#ORBInitRef.NameService=http://www.x.y.z/~user/NS_Ref
#ORBInitRef.TradingService=http://www.x.y.z/~user/TraderRef


########################################
#                                      #
#      Export of corbaloc IORs         #
#                                      #
########################################

# allow for more readable corbaloc URLs by mapping the
# actual object key to an arbitrary string the mapping
# below would permit clients of a name service to
# access it using corbaloc::ipaddress:portnum/NameService
# Note: it is NOT necessary to define this property for
# the name service here because this is done already in the
# code of the ns implementation
# The property also accepts the following mappings:
# IOR, resource, jndi, URL (e.g. file, http)
# examples:
# jacorb.orb.objectKeyMap.NameService=StandardNS/NameServer-POA/_root
# jacorb.orb.objectKeyMap.NameService=file:/home/rnc/NameSingleton.ior

##################################
#                                #
#   ORB version number output    #
#                                #
##################################

# if on, the ORB's version number is printed
# any time the ORB is initialized
jacorb.orb.print_version=off

##################################
#                                #
#   Debug output configuration   #
#                                #
##################################

# log levels:
#
# 0 = fatal errors only = "almost off" (FATAL ERRORS)
# 1 = non-fatal errors and exceptions (ERROR)
# 2 = important messages (WARN)
# 3 = informational messages and exceptions (INFO)
# 4 = debug-level output (DEBUG) (may confuse the unaware user :-)
jacorb.log.default.verbosity=1
#jacorb.verbosity=0

# where does output go? Terminal is default
#jacorb.logfile=c:/tmp/jacorb.log

# Timestamp debug log entries? (Applies to some internal logging only)
jacorb.log.timestamp=off

# Append to an existing log file or overwrite? (Applies to
# file logging only)
jacorb.logfile.append=on

# If jacorb.logfile.append is on, set rolling log size in kilobytes.
# A value of 0 implies no rolling log
jacorb.logfile.maxLogSize=0

# hexdump outgoing messages
jacorb.debug.dump_outgoing_messages=off

# hexdump incoming messages
jacorb.debug.dump_incoming_messages=off

# specify different default log patterns for here (Apache LogKit pattern syntax)
jacorb.log.default.log_pattern=[%.23{time:dd-MM-yyyy HH:mm:ss:SSS}] %.20{category}:%.7{priority}: %{message}\\n%{throwable}

##################################################
#                                                #
#    WARNING: The following properties should    #
#    only be edited by the expert user. They     #
#    can be left untouched in most cases!        #
#                                                #
##################################################



################################
#                              #
#   Basic ORB Configuration    #
#                              #
################################

# the GIOP minor version number to use for newly created IORs
jacorb.giop_minor_version=2

# number of retries if connection cannot directly be established
jacorb.retries=5

# how many msecs. do we wait between retries
jacorb.retry_interval=500

# size of network buffers for outgoing messages
jacorb.outbuf_size=2048

# log2 of maximum buffer size managed by the internal
# buffer manager.
#
# This is NOT the maximum buffer size that
# can be used, but just the largest size of buffers that
# will be kept and managed. This value will be added to
# an internal constant of 5, so the real value in bytes
# is 2**(5+maxManagedBufSize-1). You only need to increase this
# value if you are dealing with LOTS of LARGE data structures.
# You may decrease it to make the buffer manager release large
# buffers immediately rather than keeping them for later
# reuse.
jacorb.maxManagedBufSize=24
# If this value is 0 an extra unlimited size buffer cache is created
# for the CDROutputStreams. If this value is > 0 then the cache will
# be purged every x msecs.
jacorb.bufferManagerMaxFlush=-1

# Normally, a jacorb server will close the TCP/IP connection right
# after sending a CloseConnection message. However, it may
# occasionally happen that the client sends a message into the closed
# connection because it hasn't handled the CloseConnection yet. To
# avoid this situation, closing of the TCP/IP connection can be delayed.
#jacorb.connection.delay_close=on
#jacorb.connection.timeout_after_closeconnection=20000

# Wait the specified number of msecs for a reply to a request. If
# exceeded, a org.omg.CORBA.TIMEOUT exception will be thrown
#jacorb.connection.client.pending_reply_timeout=0

# client-side connection idle timeout, set no non-zero to stop
# close the connection after so many msecs.
#jacorb.connection.client_idle_timeout=0

# max time (msecs) a server keeps a connection open if nothing happens
#jacorb.connection.server_timeout=10000

# Max no of accepted connections on the server.
#jacorb.connection.max_server_connections=

# The number of msecs that are waited until the next attempt to find
# an idle connection is made (i.e. do not continuously spin)
#jacorb.connection.wait_for_idle_interval=500

# The class name of the SelectionStrategy class
#jacorb.connection.selection_strategy_class=

# The class name of the StatisticsProvider class
#jacorb.connection.statistics_provider_class=

#jacorb.reference_caching=off

#
# The following property specifies the class which is used for
# reference caching. WeakHashtable uses WeakReferences, so entries
# get gc'ed if only the Hashtable has a reference to them. This
# is useful if you have many references to short-living non-persistent
# CORBA objects. It is only available for java 1.2 and above.
#
# On the other hand the standard Hashtable keeps the references until
# they are explicitely deleted by calling _release(). This is useful
# for persistent and long-living CORBA objects.
#
#jacorb.hashtable_class=org.jacorb.util.WeakHashtable
#
jacorb.hashtable_class=java.util.Hashtable

# use GIOP 1.2 byte order markers (since CORBA 2.4-5)
jacorb.use_bom=off

# add additional IIOP 1.0 profiles even if we are using IIOP 1.2
jacorb.giop.add_1_0_profiles=off

# Use DNS names in IORs
jacorb.dns.enable=on

# Compact Typecodes (0 - off, 1 - partial (not member_names), 2 - all)
jacorb.compactTypecodes=0

# Cache typecode on read
jacorb.cacheTypecodes=off

# Cache poa names
jacorb.cachePoaNames=off

###########################################
#                                         #
#         Interoperability                #
#                                         #
###########################################

# Turn off indirection encoding for repeated typecodes. This fixes
# interoperability with certain broken ORB's eg. Orbix2000
jacorb.interop.indirection_encoding_disable=off

# Iona Comet CORBA/COM bridge can incorrectly encode buffer lengths.
# Enabling this property adds additional length checking and adjustment
# for interoperability with Comet.
jacorb.interop.comet=off

# Some ORBs do not set a byte value of 1 as a CDR encoded boolean true
# value. Enabling this property interprets any non zero CDR encoded
# boolean value as true.
jacorb.interop.lax_boolean_encoding=off

# Control whether the method create_abstract_interface_tc performs
# a validity check on the name parameter or not. Turning this check
# off circumvents a bug in Sun's implementation of javax.rmi.CORBA.ValueHander,
# which occasionally passes an invalid name (an empty string) to
# ORBSingleton.create_abstract_interface_tc. If you are using RMI valuetypes,
# you should turn this property off.
jacorb.interop.strict_check_on_tc_creation=on

# Custom-marshalled RMI valuetypes should be encoded as chunks, but some
# ORBs are not able to decode chunked values. Disable this property for
# interoperability with the ORB in Sun's JDK 1.4.2.
jacorb.interop.chunk_custom_rmi_valuetypes=on

###########################################
#                                         #
#         Socket Factories                #
#                                         #
###########################################

# A factory design pattern is used for the creation of sockets and server
# sockets.
# The jacorb.net.socket_factory property can be used to configure
# a socket factory that must implement the operations defined in the
# interface org.jacorb.orb.factory.SocketFactory.
# The jacorb.net.server_socket_factory property can be used to configure a
# server socket factory that must implement the operations defined in the
# interface org.jacorb.orb.factory.ServerSocketFactory.
#
#jacorb.net.socket_factory=org.jacorb.orb.factory.DefaultSocketFactory
#jacorb.net.server_socket_factory=org.jacorb.orb.factory.DefaultServerSocketFactory
#jacorb.net.socket_factory=org.jacorb.orb.factory.PortRangeSocketFactory
#jacorb.net.server_socket_factory=org.jacorb.orb.factory.PortRangeServerSocketFactory
#
# Additional socket factores are supported that allow for the configuration
# of maximum and minimum port numbers that can be used. This can be used to
# enable firewall traversal via a fixed port range. To use these socket factories
# configure one or both of the following property pairs. The first property pair
# configures the client socket factory and the second pair the server socket
# factory.
#
#jacorb.net.socket_factory.port.min
#jacorb.net.socket_factory.port.max
#jacorb.net.server_socket_factory.port.min
#jacorb.net.server_socket_factory.port.max

###########################################
#                                         #
#         BiDirectional GIOP              #
#                                         #
###########################################

# uncomment this initializer if you want to use BiDirectional GIOP

#org.omg.PortableInterceptor.ORBInitializerClass.bidir_init=org.jacorb.orb.connection.BiDirConnectionInitializer


###########################################
#                                         #
#       Proxy address in IOR              #
#                                         #
###########################################

#
# with these two properties it is possible to
# tell the ORB what IP/port IORs should contain,
# if the ServerSockets IP/port can't be used
# (e.g. for traffic through a firewall).
#
# WARNING: this is just "dumb" replacing, so you
# have to take care of your configuration!
#

#jacorb.ior_proxy_host=1.2.3.4
#jacorb.ior_proxy_port=4711


###########################################
#                                         #
#   The Object Adapter Internet Address   #
#                                         #
###########################################

# IP address on multi-homed host (this gets encoded in
# object references). NOTE: Adresses like 127.0.0.X
# will only be accessible from the same machine!
#OAIAddr=127.0.0.1
#OAPort=4711


############################
#                          #
#   Default Interceptors   #
#   Please leave them in!  #
#                          #
############################
org.omg.PortableInterceptor.ORBInitializerClass.standard_init=org.jacorb.orb.standardInterceptors.IORInterceptorInitializer



###############################################
#                                             #
#   Implementation Repository Configuration   #
#                                             #
###############################################
# Switch off to avoid contacting the ImR on every server start-up
jacorb.use_imr=off

# Switch off if you don't want to write the ImR address into server IORs
# (ignored if jacorb.use_imr=off)
jacorb.use_imr_endpoint=on

# if set to "on", servers that don't already have an entry on their
# first call to the imr, will get automatically registered. Otherwise,
# an UnknownServer exception is thrown.
jacorb.imr.allow_auto_register=off

# if set to "on", the imr will try to "ping" every object reference,
# that it is going to return. If the reference is not alive, TRANSIENT
# is thrown.
jacorb.imr.check_object_liveness=off

ORBInitRef.ImplementationRepository=http://www.x.y.z/~user/ImR_Ref

jacorb.imr.table_file=Z:\table.dat
jacorb.imr.backup_file=z:\backup.dat
jacorb.imr.ior_file=/home/bwana/brose/public_html/ImR_Ref
# Time (msecs) that the implementation will wait for a started server to register.
jacorb.imr.timeout=
jacorb.imr.no_of_poas=
jacorb.imr.no_of_servers=
# Host for IMR. This shouldn't normally be set
# (the listener should start on the local host) but this is useful to force a host.
#jacorb.imr.host=
# Start IMR on a fixed port (equivilant to -p option) (for the IOR)
jacorb.imr.port_number=
# Port number for IMR endpoint
jacorb.imr.endpoint_port_number=

# how many millisecs should the imr wait, until a connection from an
# application client is terminated. Default is 2000.
jacorb.imr.connection_timeout=2000

# the implementation name, should be set to a different
# name in the code of persistent servers
jacorb.implname=StandardImplName

#
# This is supposed to be a generic startup string for everything
# that calls Runtime.exec(). Might be replaced by jaco[.bat].
#
jacorb.java_exec=java -Dorg.omg.CORBA.ORBClass=org.jacorb.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=org.jacorb.orb.ORBSingleton

# with these two properties it is possible to
# tell the ORB what IP / hostname  and port the IMR IOR and IMRified server IORs should
# contain,  if the ServerSockets IP/port can't be used
# (e.g. for traffic through a firewall).
#
# WARNING: this is just "dumb" replacement, so you
# have to take care of your configuration!
#
#jacorb.imr.ior_proxy_host=1.2.3.4
#jacorb.imr.ior_proxy_port=4711


jacorb.security.log.verbosity=1
jacorb.giop.conn.log.verbosity=1

#########################
#                       #
#   SSL Configuration   #
#                       #
#########################

#
# The port number used by SSL, will be dynmically assigned
# by default
#

#OASSLPort=4711

# This interceptor must be set if programs need access to
# certificates using the CORBA Security API, SSL works also
# without this interceptor

#org.omg.PortableInterceptor.ORBInitializerClass.ForwardInit=org.jacorb.security.ssl.sun_jsse.SecurityServiceInitializer

# qualified classname of access decision object
#jacorb.security.access_decision=org.jacorb.security.level2.AccessDecisionImpl

# list of qualified classnames of principal authenticator objects,
# separated by commas (no whitespaces!). The first entry (that can
# be successfully created) will be available through the
# principal_authenticator property.
# jacorb.security.principal_authenticator=org.jacorb.security.level2.PrincipalAuthenticatorImpl

# the qualified classname of the ssl socket factory class
#jacorb.ssl.socket_factory=org.jacorb.security.ssl.sun_jsse.SSLSocketFactory
#jacorb.ssl.socket_factory=org.jacorb.security.ssl.iaik.SSLSocketFactory

# the qualified classname of the ssl server socket factory class
jacorb.ssl.server_socket_factory=org.jacorb.security.ssl.sun_jsse.SSLServerSocketFactory
#jacorb.ssl.server_socket_factory=org.jacorb.security.ssl.iaik.SSLServerSocketFactory

# exchange ssl client server roles to enforce client authentication, but
# attention: this causes problems with peers that not prepared to handle
# this role change
jacorb.security.change_ssl_roles=off

# IIOP/SSL parameters (numbers are hex values, without the leading "0x"):
# NoProtection = 1
# EstablishTrustInClient = 40
# EstablishTrustInTarget = 20
# mutual authentication = 60
# please see the programming guide for more explanation

jacorb.security.support_ssl=off

jacorb.security.ssl.client.supported_options=0
jacorb.security.ssl.client.required_options=0

jacorb.security.ssl.server.supported_options=0
jacorb.security.ssl.server.required_options=0

#
# If set, the following two values will be placed in the IOR, if
# "corbaloc:ssliop" ssliop.
#
# If not set, only EstablishTrustInTarget is used for both supported
# and required options. EstablishTrustInClient is not set, and the
# rest of the Association Options aren't currently used anyway.
jacorb.security.ssl.corbaloc_ssliop.supported_options=60
jacorb.security.ssl.corbaloc_ssliop.required_options=60

# The name and location of the keystore. This may be absolute or
# relative to the home directory.
#
# NOTE (for Sun JSSE users): The "javax.net.ssl.trustStore[Password]"
# properties don't seem to take effect, so you may want to add trusted
# certificates to "normal" keystores. In this case, please set the
# property "jacorb.security.jsse.trustees_from_ks"is to "on", so trusted
# certificates are taken from the keystore instead of a dedicated
# truststore.
jacorb.security.keystore=c:/Dokumente und Einstellungen/brose/gerald.keystore
jacorb.security.keystore_password=jacorb


#
# IAIK specific settings
#

# files with public key certs of trusted CAs
#
# WARNING: If no CA certs are present, the IAIK chain verifier will
# accept ALL otherwise valid chains!
#
jacorb.security.trustees=

# the name of the default key alias to look up in the keystore
jacorb.security.default_user=gerald
jacorb.security.default_password=jacorb

# have iaiks ssl classes print debug output to stdout
#jacorb.security.iaik_debug=off

#
# Sun JSSE specific settings
#

#jacorb.security.jsse.log.verbosity=1

# Use the keystore to take trusted certs from.
#jacorb.security.jsse.trustees_from_ks=on

# A comma-separated (no whitespaces!) list of cipher suite names. See
# the JSSE docs on how to obtain the correct cipher suite strings
jacorb.security.ssl.server.cipher_suites=
jacorb.security.ssl.client.cipher_suites=

#########################
#                       #
#   POA Configuration   #
#                       #
#########################

# displays a GUI monitoring tool for servers
jacorb.poa.monitoring=off

# POA log levels:
# 0 = fatal errors only = "almost off" (FATAL ERRORS)
# 1 = non-fatal errors and exceptions (ERROR)
# 2 = important messages (WARN)
# 3 = informational messages and exceptions (INFO)
# 4 = debug-level output (DEBUG) (may confuse the unaware user :-)
jacorb.poa.log.verbosity=1

# thread pool configuration for request processing
jacorb.poa.thread_pool_max=20
jacorb.poa.thread_pool_min=5

# if set, request processing threads in thePOA
# will run at this priority. If not set or invalid,
# MAX_PRIORITY will be used.
#jacorb.poa.thread_priority=

# Properties controlling the POA's request queue.  If queue_wait is off,
# then if there are more than queue_max requests in the queue, the
# client gets TRANSIENT exceptions for any requests.  If queue_wait is on,
# then the call blocks at the server side until no more than queue_min
# requests are left in the queue.  The new request is then delivered as usual.
jacorb.poa.queue_wait=off
jacorb.poa.queue_max=100
jacorb.poa.queue_min=10


###################################
#                                 #
#  Transport Layer Configuration  #
#                                 #
###################################

# Names of the factories classes for all installed transport plug-ins
# (comma-separated list).

#jacorb.transport.factories=org.jacorb.orb.iiop.IIOPFactories

# ProfileId tags of all installed transports that should actually
# listen on the server side.  This is a comma-separated list of numbers,
# each number must correspond to one ProfileId tag from a factory in
# jacorb.transport.factories.  In IORs produced by the server, the transport
# profiles will appear in the order indicated by this list.

#jacorb.transport.server.listeners=0

# Name of a class that selects the transport profile to use on the 
# client side.

#jacorb.transport.client.selector=org.jacorb.orb.ProfileSelector


##################################
#                                #
#   Name Service Configuration   #
#                                #
##################################

jacorb.naming.log.verbosity=1

# Whether non active references are purged from name service
# when list operation is invoked.

jacorb.naming.purge=on

# Whether resolve should return references without trying to
# ping them to see if they're still alive first.

jacorb.naming.noping=on

# Port on which to run service

# jacorb.naming.port=

#jacorb.naming.ior_filename=c:/NS_Ref

jacorb.util.tpool.log.verbosity=0
#jacorb.debug.dump_incoming_messages=on
#jacorb.debug.dump_outgoing_messages=on