activation IMR

sam <[email protected]> Tue, 6 Dec 2005 08:43:03 -0800 (PST)
Newsgroups gmane.comp.corba.orbacus
Message-ID <[email protected]>
Hi ALL.
ORBacus 430.
I tried to activate my CORBA server by IMR and can't
understand why my server activation doesn't work.
Following log is IMR output with my comments:

<<< Start IMR with empty database
[ IMR: register_oad: ws080-solaris ]
[ IMR: OAD for ws080-solaris processes: EMPTY ]
[ OAD: ready for ws080-solaris ]

<<< Register my CORBA server
[ IMR: server_starting: vpi.ais.main.std ]
[ OAD: connect_server: vpi.ais.main.std:
58.58.102.102:34246 ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_serverproc: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_sessionmanager: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_transactionmanager: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_collaboration: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_application: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_repository: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_principalmgr: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_event: holding ]
[ IMR: poa_create: vpi.ais.main.std
vpi_ais_main_domaincontroller: holding ]
[ IMR: updating: vpi.ais.main.std state: running ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_serverproc: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_sessionmanager: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_transactionmanager: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_collaboration: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_application: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_repository: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_principalmgr: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_event: inactive ]
[ IMR: poa_status: vpi.ais.main.std
vpi_ais_main_domaincontroller: inactive ]
[ IMR: updating: vpi.ais.main.std state: stopping ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_repository ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_domaincontroller ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_application ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_serverproc ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_principalmgr ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_transactionmanager ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_sessionmanager ]
[ IMR: remove_poa: vpi.ais.main.std
vpi_ais_main_collaboration ]
[ IMR: remove_poa: vpi.ais.main.std vpi_ais_main_event
]
[ OAD: close_cb: vpi.ais.main.std: 58.58.102.102:34246
]
[ OAD: connection_close: vpi.ais.main.std ]
[ OAD: vpi.ais.main.std(1384): dead ]
[ IMR: updating: vpi.ais.main.std state: stopped ]

<<< Here I try to activate my server by imradmin
[ IMR: exec: vpi.ais.main.std forked 0 times in a row
]
[ OAD: exec: vpi.ais.main.std ]
[ OAD: exec:
/export/home/VPI/bin/Solaris/Debug/aismain_srv
-ORBServerId vpi.ais.main.std -ORBserver_instance
1133903593-0 ]
[ OAD: exec: vpi.ais.main.std PID: 1393 ]
[ IMR: exec: vpi.ais.main.std: success ]
[ OAD: process died: 1393 ]
[ OAD: vpi.ais.main.std(1393): dead ]
[ IMR: updating: vpi.ais.main.std state: stopped ]

<<< Try again to activate server
[ IMR: exec: vpi.ais.main.std forked 1 times in a row
]
[ OAD: exec: vpi.ais.main.std ]
[ OAD: exec:
/export/home/VPI/bin/Solaris/Debug/aismain_srv
-ORBServerId vpi.ais.main.std -ORBserver_instance
1133903657-1 ]
[ OAD: exec: vpi.ais.main.std PID: 1401 ]
[ IMR: exec: vpi.ais.main.std: success ]
[ OAD: process died: 1401 ]
[ OAD: vpi.ais.main.std(1401): dead ]
[ IMR: updating: vpi.ais.main.std state: stopped ]
<<< again
[ IMR: max forks exceeded: 2 for server
vpi.ais.main.std ]
<<< again
[ IMR: max forks exceeded: 2 for server
vpi.ais.main.std ]


IMR config file is very simply and contains a few
lines:

# configure the IMR service
ooc.imr.trace.peer_status=3
ooc.imr.trace.process_control=3
ooc.imr.trace.server_status=3
ooc.orb.service.IMR=corbaloc::localhost:9999/IMR
ooc.imr.dbdir=/export/home/VPI/bin/Solaris/Debug/IMR

I tried same way on Windows platform with ORBacus 412.
It works!

Can somebody help me with above problem ?

Thanks
Sergei.


		
__________________________________________ 
Yahoo! DSL – Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com 

_______________________________________________
OB-Users Mailing List - [email protected]
http://mail.ooc.nf.ca/mailman/listinfo/ob-users
Visit our support FAQ before you send a message.
http://www.orbacus.com/faq/support.html