[Dbworld] BPMDS'2017 in conjunction with CAISE'17 - Last Call for papers (March 1st)

Selmin NURCAN <[email protected]>
Newsgroups gmane.comp.db.dbworld
Message-ID <[email protected]>
 Dear colleagues,

BPMDS is a two-day working conference in conjunction with CAiSE (Conference on Advanced Information Systems Engineering). The topics addressed by the BPMDS series are focused on business processes and their IT support. One of the major aims is to discuss and to learn about concepts and techniques to enhance the ability to engineer software systems closer the business requirements.

The papers should be submitted through the conference management system available at

                https://easychair.org/conferences/?conf=bpmds2017

After BPMDS’2017, continuing a long tradition (see section "publications" below), extended versions of the selected papers will be considered for publishing in a special issue of the International Journal on Software and Systems Modeling (SoSyM).

Kind regards,

Selmin Nurcan

***************************************************************************************************

International Conference on Business Process Modeling, Development, and Support (BPMDS'2017)

the 18th edition of the BPMDS series

                held in conjunction with CAiSE’17

12-13 June 2017, Essen, Germany

Submission deadline: March 1st, 2017

The Call for Papers can be downloaded from the BPMDS Web site

          http://www.bpmds.org

    Â

***************************************************************************************************

SPONSORS:

--------

- Conference on Advanced Information Systems Engineering (CAiSE). BPMDS Working Conference is officially linked on an ongoing basis to the CAiSE conference series).

- International Federation for Information Processing Working Group 8.1 (IFIP WG 8.1).

IMPORTANT DATES:

---------------

Paper abstracts (recommended): February 25th, 2017

Submission deadline: March 1st, 2017

Notification of acceptance: March 27th, 2017

Camera-ready papers due: April 6th, 2017

ABOUT THE BPMDS CONFERENCE:

--------------------------

The topics addressed by the BPMDS series are focused on business processes and their IT support. This is one of the keystones of information systems theory beyond short-lived fashions. The continued interest in this topic on behalf of the IS community is reflected by the success of the past BPMDS events, and their promotion from a workshop to a working conference.

The BPMDS series has produced seventeen events from 1998 to 2016. From 2011, BPMDS has become a two-day working conference attached to CAiSE (Conference on Advanced Information Systems Engineering). The basic principles of the BPMDS series are:

1. BPMDS serves as a meeting place for researchers and practitioners in the areas of business development, and business applications (software) development

2. The aim of the event is mainly discussions, rather than presentations.

3. Each event has a theme that is mandatory for idea papers.

4. Each event's results are, usually, published in a special issue of an international journal.

The goals, format, and history of BPMDS can be found on the web site: http://www.bpmds.org/history

BACKGROUND AND AIMS:

-------------------

BPMDS solicits papers related to Business Process Modeling, Development and Support (BPMDS) using quality, relevance, originality and applicability as main selection criteria. As a working conference, BPMDS’17 seeks to attract full research papers describing mature research, experience reports related to using BPMDS in practice, and visionary idea papers. Practitioners are also encouraged to present lessons learned from practice.

The focus theme for BPMDS'17 idea papers is

Enabling Business Transformation by Business Process Modeling, Development and Support

Papers submitted in the category idea papers will be required to be of relevance to the focus theme, thus providing a mass of new ideas around a relatively narrow but emerging research area.

For the 18th edition of the BPMDS conference, we invite the interested authors to engage during the two days of BPMDS’2017 in Essen, and to take part in a deep discussion with all participants about the challenges of business transformation in the digitally connected world and the ways business process modeling, development and support may provide capabilities to deal with those challenges. The challenges result, among others, from the impacts of the ubiquity of the actors, social networks, new business models, the co-existence of flexibility, exception handling, context awareness and personalization requirements together with other compliance and quality requirements.

Practitioners are producing business process models, researchers are studying/producing business process models, and also are producing new modeling languages when they consider that existing ones are not sufficient. What is beyond? Which kind of analyses can we make using those process models? How can we complete / enhance those process models with annotations, with data coming from everywhere out of the immediate process environment? How can the understanding we gain by working on those models in a sandbox help / facilitate the undergoing business transformation?

TOPICS FOR DISCUSSION:

----------------------

Topics of interest include but are not limited to:

Business transformation and BPMDS

-Â Â How does BPMDS enable and contribute to analyzing / understanding / representing business transformation?

-Â Â How does business transformation influence BPMDS?

- Â Â How do projects of business process modeling, development and support contribute to increasing innovative capacities for business transformation?

-Â Â What are the relationships between various types of BPS systems (SoS vs. WFMS, for instance) and types of transformation they help to support?

-Â Â How do transformative technologies such as IoT, cloud-computing, Big Data, etc., impact BPMDS, particularly do they change the notion of business process?

-Â Â How does the rise of platforms and bidirectional markets influence BPMDS?

-Â Â What are cases where business process related projects supported / facilitated business transformation?

-Â Â What are cases where business process related projects did not support / facilitate business transformation?

-Â Â How can BPMDS contribute to integrating people for business transformation, e. g., via human-centric business processes?

-Â Â Business process ecosystems in a connected and elastic world

-Â Â Pervasive business processes and ubiquitous actors supporting business transformation

-  The roles of BPMDS in business analytics and in exploiting the data abundance (“Big Data”)

-Â Â New capabilities of analysis of business process models to support business transformation

Business Process Modeling

- Business process modeling languages, notations and methods

- Multi-perspectives on business process modeling

- Coherence among multi-perspective representations

- Theoretical foundations for analyzing, modeling business processes

- Verification and validation of business process models

- Variability and adaptability of business process models

- Dynamic configuration: modeling by reuse

- Granularity, development of reusable and context-aware components: modeling for reuse

- Domain specific reference models and domain specific modeling languages

- Decision management and BPMDS

- Business process modeling enhanced by social software and social networks

Business Process Development

-Â Compliance, reliability, security, performance

- Flexibility, variability, adaptability

- Metrics, maturity and continuous improvement

- Strategy, business processes, people and IT: alignment, fit and coherence

- Knowledge-intensive business processes

- Context aware business processes

- Cross-organizational business processes

- Data-intensive business processes

- Business process change management and governance issues

- Enhancing creativity in business processes

Business Process Support

- Theoretical foundations for simulating or executing business processes

- Service orientation for better supporting business processes (appropriate level of flexibility, variability, granularity, ...)

- Business process support combined with social software and social networks

- Context aware work allocation in business processes

- Actor support vs. control support in business processes

- Mobile technologies and context aware business processes

- Business processes using cloud-services

SUBMISSIONS:

-----------

Prospective conference participants are invited to submit a paper that concerns business process modeling and development, and/or business process support (development of software dedicated to business processes). We solicit the papers (both research papers and experience reports) that contain results worth of discussion. Full research papers should report research in an advanced stage, including results and at least partial evaluation.

Thus four categories of submissions are welcome:

(1)Â Full research papers (could be technical papers or empirical evaluation papers).

(2)Â Experience reports should follow guidelines in http://www.bpmds.org/guidelines.

(3) Idea papers related to the focus theme “Enabling Business Transformation by Business Process Modeling, Development and Support”, should address completely new research positions or approaches. The compliance to the focus theme is mandatory for idea papers, which should describe precisely the situation and demonstrate the shortcomings of current methods, tools, ways of reasoning, meta-models, etc.

Papers of the first three submission types should be of up to 15 pages. Please follow the LNCS format instructions at http://www.springer.de/comp/lncs/authors.html for all of them.

(4) Lessons learned from practice (new category added this year). We welcome all practitioners to share with BPMDS participants and followers their own experience in the topics (see below) related to the BPMDS conference. This category of short papers with up to 8 pages follow the guidelines suggested for the category (2). Conformity with LNCS guidelines is not mandatory for this category. The accepted propositions will be presented during the BPMDS’17 industrial track and will be published on the BPMDS web site or in the CAISE Radar proceedings.

Â

Papers should be submitted in Adobe PDF format. The results described must be unpublished and must not be under review elsewhere. Please submit through the conference management system available at https://easychair.org/conferences/?conf=bpmds2017.

PUBLICATIONS:

------------

The conference proceedings will be published in a Springer LNBIP volume (joint with EMMSAD), "Enterprise, Business-Process and Information Systems Modeling”, as the eight previous years (LNBIP 29, LNBIP 50, LNBIP 81, LNBIP 113, LNBIP 147, LNBIP 175, LNBIP 214, LNBIP 248). Contributing authors may find all relevant information at http://www.springer.com/series/7911

After the BPMDS’17 conference, extended versions of selected papers will be considered for publishing in a special issue of the International Journal on Software and Systems Modeling (SoSyM).

The previous special issues are: BPMDS'16 in SoSyM launched; BPMDS'15 in SoSyM in progress; BPMDS'14 in SoSyM, papers already online, printed issue coming soon; BPMDS'13 in SoSyM, vol. 15, issue 2, May 2016; BPMDS'12 in SoSyM, vol. 14, issue 3, July 2015; BPMDS’11 in IJISMD, vol. 4, issue 2, 2013; BPMDS’10 selected paper in REJ, vol. 17, issue 2, 2012; BPMDS’09 in IJISMD, vol. 2, issue 2, 2011; BPMDS’08 in JSME vol. 24, issue 3, 2012; BPMDS'07 in IJBPIM, vol. 4, issue 2, 2009; BPMDS'06 in IJBPIM, vol. 3, issue 1, 2008; BPMDS'05 in SPIP, vol. 12, issue 1, 2007; BPMDS'04 in SPIP vol. 10, issue 4, 2005 & REJ vol. 10, issue 3, 2005; BPMDS'02 in BPMJ, vol. 11, issue 6, 2005.

The proceedings of BPMDS’16 are available at

http://link.springer.com/book/10.1007/978-3-319-39429-9

The proceedings of BPMDS’15 are available at

http://link.springer.com/book/10.1007/978-3-319-19237-6

The proceedings of BPMDS’14 are available at

http://www.springerlink.com/content/978-3-662-43744-5/

  Theme Section of BPMDS'14

  http://link.springer.com/article/10.1007/s10270-016-0570-9

The proceedings of BPMDS’13 are available at

http://www.springerlink.com/content/978-3-642-38483-7/Â

  Special Section of BPMDS'13

  http://link.springer.com/article/10.1007/s10270-015-0468-y

The proceedings of BPMDS’12 are available at

http://www.springerlink.com/content/978-3-642-31071-3/Â

  Special Section of BPMDS'12

  http://link.springer.com/article/10.1007/s10270-014-0419-z

The proceedings of BPMDS’11 are available at

http://www.springerlink.com/content/978-3-642-21758-6/

The proceedings of BPMDS’10 are available at

http://www.springerlink.com/content/978-3-642-13050-2/

The proceedings of BPMDS’09 are available at

http://www.springerlink.com/content/978-3-642-01861-9/

ORGANIZERS and PROGRAM COMMITTEE CHAIRS:

-----------------------------------------

Selmin Nurcan – Université Paris 1 Panthéon-Sorbonne, France

Jens Gulden, University of Duisburg-Essen, Germany

STEERING COMMITTEE:

-------------------

Ilia Bider – Stockholm University and IbisSoft, Sweden

Selmin Nurcan – University Paris 1 Panthéon Sorbonne, France

Rainer Schmidt – Munich University of Applied Sciences, Germany

Pnina Soffer – University of Haifa, Israel

INDUSTRIAL ADVISORY BOARD:

-------------------------

Ilia Bider, Stockholm University and IbisSoft, Sweden

Pascal Negros, Arch4IE, France

Gil Regev, EPFL and Itecor, Switzerland

INDUSTRIAL TRACK CHAIRS:

-------------------------

Rainer Schmidt – Munich University of Applied Sciences, Germany

Jens Gulden, University of Duisburg-Essen, Germany

PROGRAM COMMITTEE:

--------------------------

João Paulo A. Almeida, Federal University of Espírito Santo, Brazil

Eric Andonoff , Université Toulouse 1, France

Judith Barrios Albornoz, University Los Andes, Venezuela

Ilia Bider, Stockholm University and IbisSoft, Sweden

Kahina Bessai, Nancy-Université, France

Karsten Boehm, FH KufsteinTirol – University of Applied Science, Austria

Lars Brehm, Munich University of Applied Sciences, Germany

Dirk Fahland, Technische Universiteit Eindhoven, The Netherlands

Claude Godart, Nancy-Université, France Â

Renata Guizzardi, Federal University of Espírito Santo, Brazil

Jens Gulden, University of Duisburg-Essen, Germany

Amine Jalali, Stockholm University, Sweden

Paul Johannesson, Stockholm University, Sweden

Marite Kirikova, Riga Technical University, Latvia

Agnes Koschmider, Karlsruhe Institute of Technology, Germany

Marcello La Rosa, Queensland University of Technology, Australia

Jan Mendling, Vienna University of Economics and Business, Austria Â

Michael Möhring, Aalen University of Applied Sciences, Germany

Pascal Negros, Arch4IE, France

Jens Nimis, Karlsruhe University of Applied Sciences, Germany

Selmin Nurcan, Université Paris 1 Panthéon-Sorbonne, France

Oscar Pastor, Universitat Polytechnica de Valencia, Spain

Elias Pimenidis, University of the West of England

Manfred Reichert, University of Ulm, Germany

Hajo Reijers, Eindhoven University of Technology

Iris Reinhartz-Berger, University of Haifa, Israel

Gil Regev, EPFL and Itecor, Switzerland

Colette Rolland, Université Paris 1 Panthéon-Sorbonne, France

Michael Rosemann, Queensland University of Technology, Australia

Shazia Sadiq, University of Queensland, Australia

Rainer Schmidt, Munich University of Applied Sciences, Germany

Stefan Schönig, University of Bayreuth, Germany

Samira Si-Said Cherfi, CNAM, France

Pnina Soffer, University of Haifa, Israel

Roland Ukor, FirstLinq Limited, UK

Barbara Weber, Technical University of Denmark

Matthias Weidlich, Humboldt-University Berlin, Germany

Jelena Zdravkovic, Royal University of Technology, Sweden

Alfred Zimmermann, Reutlingen University, Germany

_______________________________________________
Please do not post msgs that are not relevant to the database community at large.  Go to www.cs.wisc.edu/dbworld for guidelines and posting forms.
To unsubscribe, go to https://lists.cs.wisc.edu/mailman/listinfo/dbworld
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.