Re: MySQL Community Server 5.1.35 has been released
"Dave Shariff Yadallee - System Administrator a.k.a. The Root of the Problem" <[email protected]>
| Newsgroups | gmane.comp.db.mysql.general,gmane.comp.db.mysql.packagers |
|---|---|
| Message-ID | <[email protected]> |
On Thu, Jun 04, 2009 at 01:27:34PM -0600, Timothy Smith wrote: > Dear MySQL users, > > MySQL Community Server 5.1.35, a new version of the popular Open > Source Database Management System, has been released. MySQL 5.1.35 is > recommended for use on production systems. > > For an overview of what's new in MySQL 5.1, please see > > http://dev.mysql.com/doc/refman/5.1/en/mysql-nutshell.html > > For information on installing MySQL 5.1.35 on new servers or upgrading > to MySQL 5.1.35 from previous MySQL releases, please see > > http://dev.mysql.com/doc/refman/5.1/en/installing.html > > MySQL Server is available in source and binary form for a number of > platforms from our download pages at > > http://dev.mysql.com/downloads/ > > Not all mirror sites may be up to date at this point in time, so if > you can't find this version on some mirror, please try again later or > choose another download site. > > We welcome and appreciate your feedback, bug reports, bug fixes, > patches, etc.: > > http://forge.mysql.com/wiki/Contributing > > For information on open issues in MySQL 5.1, please see the errata > list at > > http://dev.mysql.com/doc/refman/5.1/en/open-bugs.html > > The following section lists the changes in the MySQL source code since > the previous released version of MySQL 5.1. It may also be viewed > online at > > http://dev.mysql.com/doc/refman/5.1/en/news-5-1-35.html > > Enjoy! > > Timothy Smith > The MySQL build team at Sun Microsystems > > ======================================================================= > > This release of MySQL has two known outstanding issues for > Windows: > > * The .msi installer does not detect an existing root password > on the initial configuration attempt. To work around this, > install and configure MySQL as normal, but skip any changes to > security. (There is a checkbox that allows this on the > security screen of the configuration wizard.) Then check your > settings: > > + If the old root password and security settings are okay, > you are done and can proceed to use MySQL. > > + Otherwise, reconfigure with the wizard and make any > changes on the second configuration attempt. The wizard > will properly prompt for the existing root password and > allow changes to be made. > > This issue has been filed as > Bug#45200: http://bugs.mysql.com/45200 for correction in a > future release. > > * The Windows configuration wizard allows changes to InnoDB > settings during a reconfiguration operation. For an upgrade, > this may cause difficulties. To work around this, use one of > the following alternatives: > > + Do not change InnoDB settings. > > + Copy files from the old InnoDB location to the new one. > > This issue has been filed as > Bug#45201: http://bugs.mysql.com/45201 for correction in a > future release. > > Bugs fixed: > > * Important Change: Replication: The transactional behavior of > STOP SLAVE has changed. Formerly, it took effect immediately, > even inside a transaction; now, it waits until the current > replication event group (if any) has finished executing, or > until the user issues a KILL QUERY or KILL CONNECTION > statement. > > This was done in order to solve the problem encountered when > replication was stopped while a nontransactional slave was > replicating a transaction on the master. (It was impossible to > roll back a mixed-engines transaction when one of the engines > was nontransactional, which meant that the slave could not > safely re-apply any transaction that had been interrupted by > STOP SLAVE.) (Bug#319: http://bugs.mysql.com/319, > Bug#38205: http://bugs.mysql.com/38205) > See also Bug#43217: http://bugs.mysql.com/43217. > > * Partitioning: When a value was equal to a PARTITION ... VALUES > LESS THAN (value) value other than MAXVALUE, the corresponding > partition was not pruned. > (Bug#42944: http://bugs.mysql.com/42944) > > * Replication: Unrelated errors occurring during the execution > of RESET SLAVE could cause the slave to crash. > (Bug#44179: http://bugs.mysql.com/44179) > > * Replication: The --slave-skip-errors option had no effect when > using row-based logging format. > (Bug#39393: http://bugs.mysql.com/39393) > > * Replication: The following erors were not correctly reported: > > + Failures during slave thread initialization > > + Failures while initializing the relay log position > (immediately following the starting of the slave thread) > > + Failures while processing queries passed through the > --init_slave option. > > Information about these types of failures can now be found in > the output of SHOW SLAVE STATUS. > (Bug#38197: http://bugs.mysql.com/38197) > > * Replication: Killing the thread executing a DDL statement, > after it had finished its execution but before it had written > the binlog event, caused the error code in the binlog event to > be set (incorrectly) to ER_SERVER_SHUTDOWN or > ER_QUERY_INTERRUPTED, which caused replication to fail. > (Bug#37145: http://bugs.mysql.com/37145) > > See also Bug#27571: http://bugs.mysql.com/27571, > Bug#22725: http://bugs.mysql.com/22725. > > * Replication: Column alises used inside subqueries were ignored > in the binary log. (Bug#35515: http://bugs.mysql.com/35515) > > * Valgrind warnings for the DECODE(), ENCRYPT(), and > FIND_IN_SET() functions were corrected. > (Bug#44358: http://bugs.mysql.com/44358, > Bug#44365: http://bugs.mysql.com/44365, > Bug#44367: http://bugs.mysql.com/44367) > > * On Windows, entries for build-vs9.bat and build-vs9_x64.bat > were missing in win/Makefile.am. > (Bug#44353: http://bugs.mysql.com/44353) > > * Incomplete cleanup of JOIN_TAB::select during the filesort of > rows for a GROUP BY clause inside a subquery caused a server > crash. (Bug#44290: http://bugs.mysql.com/44290) > > * Not all lock types had proper descriptive strings, resulting > in garbage output from mysqladmin debug. > (Bug#44164: http://bugs.mysql.com/44164) > > * Use of HANDLER statements with INFORMATION_SCHEMA tables > caused a server crash. Now HANDLER is prohibited with such > tables. (Bug#44151: http://bugs.mysql.com/44151) > > * Invoking SHOW TABLE STATUS from within a stored procedure > could cause a Packets out of order error. > (Bug#43962: http://bugs.mysql.com/43962) > > * myisamchk could display a negative Max keyfile length value. > (Bug#43950: http://bugs.mysql.com/43950) > > * On 64-bit systems, a key_buffer_size value larger than 4GB > could couse MyISAM index corruption. > (Bug#43932: http://bugs.mysql.com/43932) > > * mysqld_multi incorrectly passed --no-defaults to mysqld_safe. > (Bug#43876: http://bugs.mysql.com/43876) > > * SHOW VARIABLES did not properly display the value of > slave_skip_errors. (Bug#43835: http://bugs.mysql.com/43835) > > * On Windows, a server crash occurred for attempts to insert a > floating-point value into a CHAR column with a maximum length > less than the converted floating-point value length. > (Bug#43833: http://bugs.mysql.com/43833) > > * Incorrect initialization of MyISAM table indexes could cause > incorrect query results. > (Bug#43737: http://bugs.mysql.com/43737) > > * libmysqld crashed when it was reinitialized. > (Bug#43706: http://bugs.mysql.com/43706, > Bug#44091: http://bugs.mysql.com/44091) > > * InnoDB uses random numbers to generate dives into indexes for > calculating index cardinality. However, under certain > conditions, the algorithm did not generate random numbers, so > ANALYZE TABLE did not update cardinality estimates properly. A > new algorithm has been introduced with better randomization > properties, together with a system variable, > innodb_use_legacy_cardinality_algorithm, that controls which > algorithm to use. The default value of the variable is 1 (ON), > to use the original algorithm for compatibility with existing > applications. The variable can be set to 0 (OFF) to use the > new algorithm with improved randomness. > (Bug#43660: http://bugs.mysql.com/43660) > > * UNION of floating-point numbers did unnecessary rounding. > (Bug#43432: http://bugs.mysql.com/43432) > > * ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME failed when the > database contained views. > (Bug#43385: http://bugs.mysql.com/43385) > > * Certain statements might open a table and then wait for an > impending global read lock without noticing whether they hold > a table being waiting for by the global read lock, causing a > hang. Affected statements are SELECT ... FOR UPDATE, LOCK > TABLES ... WRITE, TRUNCATE TABLE, and LOAD DATA INFILE. > (Bug#43230: http://bugs.mysql.com/43230) > > * Using an XML function such as ExtractValue() more than once in > a single query could produce erroneous results. > (Bug#43183: http://bugs.mysql.com/43183) > See also Bug#43937: http://bugs.mysql.com/43937. > > * Full-text prefix searches could hang the connection and cause > 100% CPU consumption. (Bug#42907: http://bugs.mysql.com/42907) > > * InnoDB had excessive contention for a character set mutex. > (Bug#42649: http://bugs.mysql.com/42649) > > * Incorrect elevation of warning messages to error messages for > unsafe statements caused a server crash. > (Bug#42640: http://bugs.mysql.com/42640) > > * CHECK TABLE suggested use of REPAIR TABLE for corrupt tables > for storage engines not supported by REPAIR TABLE. Now CHECK > TABLE suggests that the user dump and reload the table. > (Bug#42563: http://bugs.mysql.com/42563) > > * Compressing a table with the myisampack utility caused the > server to produce Valgrind warnings when it opened the table. > (Bug#41541: http://bugs.mysql.com/41541) > > * For a MyISAM table with DELAY_KEY_WRITE enabled, the index > file could be corrupted without the table being marked as > crashed if the server was killed. > (Bug#41330: http://bugs.mysql.com/41330) > > * Killing an INSERT ... SELECT statement for a MyISAM table > could cause table corruption if the table had indexes. > (Bug#40827: http://bugs.mysql.com/40827) > > * A multiple-table DELETE IGNORE statement involving a foreign > key constraint caused an assertion failure. > (Bug#40127: http://bugs.mysql.com/40127) > > * Multiple-table UPDATE statements did not properly activate > triggers. (Bug#39953: http://bugs.mysql.com/39953) > > * The mysql_setpermission operation for removing database > privileges removed global privileges instead. > (Bug#39852: http://bugs.mysql.com/39852) > > * A stored routine contain a C-style comment could not be dumped > and reloaded. (Bug#39559: http://bugs.mysql.com/39559) > > * In an UPDATE or DELETE via a secondary index, InnoDB did not > store the cursor position. This made InnoDB crash in > semi-consistent read while attempting to unlock a nonmatching > record. (Bug#39320: http://bugs.mysql.com/39320) > > * The functions listed in Section 11.13.4.2.3, "Creating > Geometry Values Using MySQL-Specific Functions," previously > accepted WKB arguments and returned WKB values. They now > accept WKB or geometry arguments and return geometry values. > The functions listed in Section 11.13.4.2.2, "Creating > Geometry Values Using WKB Functions," previously accepted WKB > arguments and returned geometry values. They now accept WKB or > geometry arguments and return geometry values. > (Bug#38990: http://bugs.mysql.com/38990) > > * On WIndows, running the server with myisam_use_mmap enabled > caused MyISAM table corruption. > (Bug#38848: http://bugs.mysql.com/38848) > > * CHECK TABLE did not properly check whether MyISAM tables > created by servers from MySQL 4.0 or older needed to be > upgraded. This could cause problems upgrading to MySQL 5.1 or > higher. (Bug#37631: http://bugs.mysql.com/37631) > > * An UPDATE statement that updated a column using the same > DES_ENCRYPT() value for each row actually updated different > rows with different values. > (Bug#35087: http://bugs.mysql.com/35087) > > * For shared-memory connections, the read and write methods did > not properly handle asynchronous close events, which could > lead to the client locking up waiting for a server response. > For example, a call to mysql_real_query() would block forever > on the client side if the executed statement was aborted on > the server side. Thanks to Armin Schöffmann for the bug report > and patch. (Bug#33899: http://bugs.mysql.com/33899) > > * CHECKSUM TABLE was not killable with KILL QUERY. > (Bug#33146: http://bugs.mysql.com/33146) > > * myisamchk and myisampack were not being linked with the > library that enabled support for * filename pattern expansion. > (Bug#29248: http://bugs.mysql.com/29248) > > * For InnoDB tables that have their own .ibd tablespace file, a > superfluous ibuf cursor restoration fails! message could be > written to the error log. This warning has been suppressed. > (Bug#27276: http://bugs.mysql.com/27276) > > * COMMIT did not delete savepoints if there were no changes in > the transaction. (Bug#26288: http://bugs.mysql.com/26288) > > * Several memory allocation functions were not being checked for > out-of-memory return values. > (Bug#25058: http://bugs.mysql.com/25058) > > > Timothy Smith, Product Engineering, MySQL > Database Technology Group, Sun Microsystems > > > -- > MySQL Announce Mailing List > For list archives: http://lists.mysql.com/announce > To unsubscribe: http://lists.mysql.com/[email protected] > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. Error in compiling: mv -f .deps/liboptions_la-priv.Tpo .deps/liboptions_la-priv.Plo /bin/sh ../../libtool --preserve-dup-deps --tag=CXX --mode=link g++ -O3 -fno-implicit-templates -fno-exceptions -fno-rtti -DDEFAULT_PID_FILE_NAME="/usr/contrib/mysqld/mysqlmanager.pid" -DDEFAULT_LOG_FILE_NAME="/usr/contrib/mysqld/mysqlmanager.log" -DDEFAULT_SOCKET_FILE_NAME="/tmp/mysqlmanager.sock" -DDEFAULT_PASSWORD_FILE_NAME="/etc/mysqlmanager.passwd" -DDEFAULT_MYSQLD_PATH="/usr/contrib/libexec/mysqld" -DDEFAULT_CONFIG_FILE="my.cnf" -DPROTOCOL_VERSION=10 -O3 -fno-implicit-templates -fno-exceptions -fno-rtti -o liboptions.la liboptions_la-options.lo liboptions_la-priv.lo ../../libmysql/get_password.lo -lm test: unrecognized integer ` ar cru .libs/liboptions.a .libs/liboptions_la-options.o .libs/liboptions_la-priv.o ../../libmysql/.libs/get_password.o ~ranlib .libs/liboptions.a/liboption' ../../libtool: arith: syntax error: " 47 + .libs/liboptions_la-options.o~RANLI " gmake[2]: *** [liboptions.la] Error 2 gmake[2]: Leaving directory `/usr/src/contrib/mysql/mysql-5.1.35/server-tools/instance-manager' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/src/contrib/mysql/mysql-5.1.35/server-tools' gmake: *** [all-recursive] Error 1 *** Error code 2 Stop. Help!! -- MySQL General Mailing List For list archives: http://lists.mysql.com/mysql To unsubscribe: http://lists.mysql.com/[email protected]