Re:

Arunkumar,

Could you possibly try to build DBD::mysql without that flag using GCC?  
I think that could clear up your issue,

kind regards,

Patrick

On Jun 30, 2005, at 6:10 PM, <[email protected]> wrote:

> Hi All,
>
> I am facing the build problem while installing the DBD-MySql perl  
> module (ver 2.9008) using both GCC and CC compilers in HP-UX machine.
>
> For the Build using GCC, the compiler error is produced due to the  
> unknown compiler option "+DAportable".
>
> For the Build using CC, the preprocessor error is produced due to the  
> recursive declration of macro "PerlIO" in perlio.h file.
>
> Please give me the solution to get rid of this problem.
>
> Thanks in advance.
>
> Regards,
> Arun.
>  
> Wipro Technologies.
>
>
> The following is the log for both build.
>
> ======================================================================= 
> ===================
>     DBD-Mysql-2.9008 Perl module Build in HP-UX 11.11  using GCC
> ======================================================================= 
> ===================
>
> # uname -a
> HP-UX hpccase B.11.11 U 9000/871 2015587066 unlimited-user license
>
> # perl -v
> This is perl, v5.8.7 built for PA-RISC2.0
>
> # gcc -v
> Using built-in specs.
> Target: hppa2.0w-hp-hpux11.11
> Configured with:
> /scratch/joseph/pkgbuild/3.3.1/hpux-11/gcc-4.0.0/configure
> --enable-languages=c,c++ --enable-threads=posix --disable-nls
>
> --disable-libmudflap --with-gnu-as --without-gnu-ld
> --with-as=/usr/local/bin/as --with-ld=/usr/ccs/bin/ld
> --prefix=/usr/local
> Thread model: posix
> gcc version 4.0.0
>
> # perl Makefile.PL CC=gcc
> I will use the following settings for compiling and testing:
>
>   cflags        (mysql_config) =
> -I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/include +DAportable
>   libs          (mysql_config) =
> -L/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/lib -lmysqlclient -lz
> -lcrypt -lnsl -lm
>   mysql_config  (guessed     ) = mysql_config
>   nocatchstderr (default     ) = 0
>   nofoundrows   (default     ) = 0
>   ssl           (guessed     ) = 0
>   testdb        (default     ) = test
>   testhost      (default     ) =
>   testpassword  (default     ) =
>   testsocket    (default     ) =
>   testuser      (default     ) =
>
> To change these settings, see 'perl Makefile.PL --help' and
> 'perldoc INSTALL'.
>
> Note (probably harmless): No library found for -lz
> Using DBI 1.48 (for perl 5.008007 on PA-RISC2.0) installed in
> /opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
> Writing Makefile for DBD::mysql
> # make
>         gcc -c  -I/opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
> -I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/includ
> e +DAportable -DDBD_MYSQL_INSERT_ID_IS_GOOD -g   -mpa-risc-2-0
> -D_HPUX_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/pro/l
> ocal/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O
> -DVERSION=\"2.9008\"  -DXS_VERSION=\"2.9008\" -fPIC "-I/opt/
> perl/lib/5.8.7/PA-RISC2.0/CORE"   dbdimp.c
> gcc: +DAportable: No such file or directory
> *** Error exit code 1
>
> Stop.
>
> ======================================================================= 
> ===================
>
> ======================================================================= 
> ===================
>         DBD-Mysql-2.9008 Perl module Build in HP-UX 11.11  using HP C  
> compiler (cc)
> ======================================================================= 
> ===================
>
>
> # perl Makefile.PL CC=cc
> I will use the following settings for compiling and testing:
>
>   cflags        (mysql_config) =
> -I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/include +DAportable
>   libs          (mysql_config) =
> -L/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/lib -lmysqlclient -lz
> -lcrypt -lnsl -lm
>   mysql_config  (guessed     ) = mysql_config
>   nocatchstderr (default     ) = 0
>   nofoundrows   (default     ) = 0
>   ssl           (guessed     ) = 0
>   testdb        (default     ) = test
>   testhost      (default     ) =
>   testpassword  (default     ) =
>   testsocket    (default     ) =
>   testuser      (default     ) =
>
> To change these settings, see 'perl Makefile.PL --help' and
> 'perldoc INSTALL'.
>
> Checking if your kit is complete...
> Looks good
> Note (probably harmless): No library found for -lz
> Using DBI 1.48 (for perl 5.008007 on PA-RISC2.0) installed in
> /opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
> Writing Makefile for DBD::mysql
> # make
> cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
> cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
> cp lib/Mysql.pm blib/lib/Mysql.pm
> cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
> cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
> cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
>         cc -c  -I/opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
> -I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/include +DAportable
>
> -DDBD_MYSQL_INSERT_ID_IS_GOOD -g   -mpa-risc-2-0 -D_HPUX_SOURCE
> -DDEBUGGING -fno-strict-aliasing -pipe -I/pro/local/include
>
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O
> -DVERSION=\"2.9008\"  -DXS_VERSION=\"2.9008\" -fPIC
>
> "-I/opt/perl/lib/5.8.7/PA-RISC2.0/CORE"   dbdimp.c
> (Bundled) cc: warning 480: The -g option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 422: Unknown option "m" ignored.
> (Bundled) cc: warning 480: The -p option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 422: Unknown option "a" ignored.
> (Bundled) cc: warning 422: Unknown option "-" ignored.
> (Bundled) cc: warning 480: The -r option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 422: Unknown option "i" ignored.
> (Bundled) cc: warning 422: Unknown option "-" ignored.
> (Bundled) cc: warning 422: Unknown option "2" ignored.
> (Bundled) cc: warning 422: Unknown option "-" ignored.
> (Bundled) cc: warning 422: Unknown option "0" ignored.
> (Bundled) cc: warning 422: Unknown option "f" ignored.
> (Bundled) cc: warning 480: The -p option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 422: Unknown option "i" ignored.
> (Bundled) cc: warning 480: The -p option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 480: The -e option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 480: The -g option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 480: The -O option is available only with the  
> C/ANSI C product; ignored.
> (Bundled) cc: warning 422: Unknown option "f" ignored.
> cpp: "/opt/perl/lib/5.8.7/PA-RISC2.0/CORE/perlio.h", line 114: error  
> 4065: Recursion in macro "PerlIO".
> *** Error exit code 1
>
> Stop.
> #
>
> ======================================================================= 
> ===================
>  
>
>
>  Confidentiality Notice
>
>  The information contained in this electronic message and any  
> attachments to this message are intended
>  for the exclusive use of the addressee(s) and may contain  
> confidential or privileged information. If
>  you are not the intended recipient, please notify the sender at Wipro  
> or [email protected] immediately
>  and destroy all copies of this message and any attachments.
>
Patrick Galbraith Senior Software Developer
[email protected] http://www.mysql.com

Those who fear climbing mountains
Shall live forever in the holes - Arab Poet