Re: Need help in establishing pgadmin4 to connect to the postgres database server when the database is listening on port 5433 (instead of port 5432)

There are more firewalls than just the one running (or not) on cemtore01.

Keep things simple and just run a traceroute from the server running 
pgadmin4 to the server running postgres.

If that works, then telnet to the server on port 5433

On 8/12/19 4:51 PM, Bikram MAJUMDAR wrote:
>
> Hi Tim,
>
> Thanks for your quick response.
>
> Are you thinking port 5433 is not opened for listening on the postgres 
> database server?
>
> [root@cemtore01 ~]# systemctl status firewalld.service
>
> â firewalld.service - firewalld - dynamic firewall daemon
>
>    Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; 
> vendor preset: enabled)
>
>    Active: active (running) since Mon 2019-04-01 05:49:28 CDT; 4 months 11 
> days ago
>
>      Docs: man:firewalld(1)
>
> Main PID: 883 (firewalld)
>
>    CGroup: /system.slice/firewalld.service
>
> ââ883 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid
>
> Apr 01 05:49:28 cemtore01 systemd[1]: Started firewalld - dynamic firewall 
> daemon.
>
> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: ICMP type 
> 'beyond-scope' is not supported by the kernel for ipv6.
>
> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: beyond-scope: 
> INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
>
> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: ICMP type 
> 'failed-policy' is not supported by the kernel for ipv6.
>
> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: failed-policy: 
> INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
>
> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: ICMP type 
> 'reject-route' is not supported by the kernel for ipv6.
>
> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: reject-route: 
> INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
>
> May 22 11:25:23 cemtore01 firewalld[883]: ERROR: INVALID_ZONE: port
>
> May 22 11:25:40 cemtore01 firewalld[883]: ERROR: INVALID_ZONE: ports
>
> May 22 11:27:07 cemtore01 firewalld[883]: ERROR: INVALID_ZONE: zone
>
> *Bikram Majumdar*
>
> Sr Software Developer/DBA, Aqsacom Inc.
>
> *c.*1.972.365.3737
>
> <http://www.aqsacom.com/>
>
> *Disclaimer. *This electronic mail message contains CONFIDENTIAL 
> information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED 
> COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE PROTECTED 
> BY LAW FROM DISCLOSURE, and (b) intended only for the use of the 
> Addressee(s) named herein. If you are not an Addressee, or the person 
> responsible for delivering this to an Addressee, you are hereby notified 
> that reading, copying, or distributing this message is prohibited. If you 
> have received this electronic mail message in error, please reply to the 
> sender and take the steps necessary to delete the message completely from 
> your computer system. Statement and opinions expressed in this e-mail are 
> those of the sender, and do not necessarily reflect those of AQSACOM. 
> AQSACOM accepts no liability for any damage caused by any virus/worms 
> transmitted by this email.
>
> *From:* Tim Scheurenbrand <[email protected]>
> *Sent:* Monday, August 12, 2019 4:25 PM
> *To:* Bikram MAJUMDAR <[email protected]>; 
> [email protected]
> *Cc:* [email protected]
> *Subject:* Re: Need help in establishing pgadmin4 to connect to the 
> postgres database server when the database is listening on port 5433 
> (instead of port 5432)
>
> Hi Bikram
>
> Have you checked your firewall settings?
>
> Tim Scheurenbrand
>
>
>
> On Mon, Aug 12, 2019 at 11:08 PM +0200, "Bikram MAJUMDAR" 
> <[email protected] <mailto:[email protected]>> wrote:
>
>     Hi ,
>
>     We need help in resolving connection issues using the pgadmin tool.
>
>     We had our pgadmin (pgadmin4) installed a few months back on windows
>     10 and we were able to use it for  our postgres server running on port
>     5432.
>
>     But, recently we had to change our postgres server port from 5433 to
>     5432 -
>
>     And accordingly, in pgadmin we changed the port also to 5433 – but we
>     are receiving connection timed out error in connecting to our server
>     (see below screen shot).
>
>     Please help to resolve this issue.
>
>     *Bikram Majumdar*
>
>     Sr Software Developer/DBA, Aqsacom Inc.
>
>     *c.*1.972.365.3737
>
>     *e.*[email protected] <mailto:[email protected]>
>
>     *s.*BIKRAM MAJUMDAR
>
>     <http://www.aqsacom.com/>
>
>     *Disclaimer. *This electronic mail message contains CONFIDENTIAL
>     information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED
>     COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE
>     PROTECTED BY LAW FROM DISCLOSURE, and (b) intended only for the use of
>     the Addressee(s) named herein. If you are not an Addressee, or the
>     person responsible for delivering this to an Addressee, you are hereby
>     notified that reading, copying, or distributing this message is
>     prohibited. If you have received this electronic mail message in
>     error, please reply to the sender and take the steps necessary to
>     delete the message completely from your computer system. Statement and
>     opinions expressed in this e-mail are those of the sender, and do not
>     necessarily reflect those of AQSACOM. AQSACOM accepts no liability for
>     any damage caused by any virus/worms transmitted by this email.
>

-- 
Angular momentum makes the world go 'round.