Re: Need help in establishing pgadmin4 to connect to the postgres database server when the database is listening on port 5433 (instead of port 5432)

Hi Bikram,

Use netstat -lnt to see what services are running. I think some other
service is running on 5432 because of which your postgresql is running on
5433.

Regards,

Arnab Biswas

On Fri, 16 Aug, 2019, 02:13 Ramakrishna Chava, <[email protected]> wrote:

>  Hi Bikram,
>
> I read the subject and misunderstand of the problem.
>
> You  are able  to start database with 5433 port number means, either 5432
> port  firewal blocked or to clear all s_% logs from temp directory and
> restart the server.
>
> Still, if you have any issues and let me know status.
>
> Thank You,
> Ram.
>
>
> On Fri, Aug 16, 2019 at 1:44 AM Bikram MAJUMDAR <
> [email protected]> wrote:
>
>> Hi Ramakrisna,
>>
>>
>>
>> I am not sure I understand what you are trying to explain.
>>
>>
>>
>> To be a little more clear :  Postgres database is running  as a service
>> by running the following command:
>>
>> # systemctl start postgresql
>>
>>
>>
>> And postgresql is running on port 5433 (see below):
>>
>>
>>
>> *Bikram Majumdar*
>>
>> Sr Software Developer/DBA, Aqsacom Inc.
>>
>> *c.* 1.972.365.3737
>>
>>
>>
>> <http://www.aqsacom.com/>
>>
>>
>>
>> *Disclaimer. *This electronic mail message contains CONFIDENTIAL
>> information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED
>> COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE PROTECTED
>> BY LAW FROM DISCLOSURE, and (b) intended only for the use of the
>> Addressee(s) named herein. If you are not an Addressee, or the person
>> responsible for delivering this to an Addressee, you are hereby notified
>> that reading, copying, or distributing this message is prohibited. If you
>> have received this electronic mail message in error, please reply to the
>> sender and take the steps necessary to delete the message completely from
>> your computer system. Statement and opinions expressed in this e-mail
>> are those of the sender, and do not necessarily reflect those of AQSACOM.
>> AQSACOM accepts no liability for any damage caused by any virus/worms
>> transmitted by this email.
>>
>>
>>
>> *From:* Ramakrishna Chava <[email protected]>
>> *Sent:* Thursday, August 15, 2019 2:43 PM
>> *To:* Bikram MAJUMDAR <[email protected]>
>> *Cc:* Ron <[email protected]>; [email protected]
>> *Subject:* Re: Need help in establishing pgadmin4 to connect to the
>> postgres database server when the database is listening on port 5433
>> (instead of port 5432)
>>
>>
>>
>>
>>
>> Hi Friends,
>>
>>
>>
>> When start  database through pg_ctl  that port should be 5432 as per
>> shared screenshot details but while connect  to pgadmin 5433 means,those
>> records of from cache memory, to clear all logs and to stop/start service
>> on windows machine ("C:\PostgreSQL\11\bin\pg_ctl.exe" runservice -N
>> "postgresql-x64-11" -D "C:\PostgreSQL\11\data" -w).
>>
>>
>>
>> Postgres,if doesn't run on 5433 port then should be give below error.
>>
>>
>>
>> Unable to connect to server:
>>
>> could not connect to server: Connection refused (0x0000274D/10061)
>> Is the server running on host "test_server-01" (114.102.170.244) and
>> accepting
>> TCP/IP connections on port 5433?
>>
>>
>>
>> Thank You,
>>
>> Ram.
>>
>>
>>
>> On Thu, Aug 15, 2019 at 11:33 PM Bikram MAJUMDAR <
>> [email protected]> wrote:
>>
>> Hi Ron,
>>
>>
>>
>> I still have some issues I need to resolve.
>>
>> As noted before in earlier email, we were able to resolve the connection
>> issue by stopping and disabling firewall on the postgres database server.
>>
>> And, we can connect to port 5433.
>>
>>
>>
>> But the reason to switch postgresql port (from default 5432 to 5433) is
>> that : we want to run pgpool for connection balance on port 5432, and
>> postgresql on port 5433.
>>
>> And we are running pgpool on the same server where the database is
>> running.
>>
>> Everything works fine on the postgresql server – we can connect to the
>> database via pgpool port 5432 (no issues – see screenshot below):
>>
>>
>>
>>
>>
>> But, connections from pg4admin are failing with pgpool running on port
>> 5432:
>>
>> IT CANNOT CONNECT VIA PGPOOL (i.e when we specify port 5432 in pg4admin):
>> HOWEVER, IT CONNECTS FINE WHEN WE USE PORT 5433 (i.e when we are not
>> connecting via pgpool)
>>
>>
>>
>>
>>
>>
>>
>> Any idea?
>>
>>
>>
>> Thanks and regards,
>>
>> *Bikram Majumdar*
>>
>> Sr Software Developer/DBA, Aqsacom Inc.
>>
>> *c.* 1.972.365.3737
>>
>>
>>
>> <http://www.aqsacom.com/>
>>
>>
>>
>> *Disclaimer. *This electronic mail message contains CONFIDENTIAL
>> information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED
>> COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE PROTECTED
>> BY LAW FROM DISCLOSURE, and (b) intended only for the use of the
>> Addressee(s) named herein. If you are not an Addressee, or the person
>> responsible for delivering this to an Addressee, you are hereby notified
>> that reading, copying, or distributing this message is prohibited. If you
>> have received this electronic mail message in error, please reply to the
>> sender and take the steps necessary to delete the message completely from
>> your computer system. Statement and opinions expressed in this e-mail are
>> those of the sender, and do not necessarily reflect those of AQSACOM.
>> AQSACOM accepts no liability for any damage caused by any virus/worms
>> transmitted by this email.
>>
>>
>>
>> *From:* Bikram MAJUMDAR
>> *Sent:* Monday, August 12, 2019 5:19 PM
>> *To:* Ron <[email protected]>; [email protected]
>> *Subject:* RE: Need help in establishing pgadmin4 to connect to the
>> postgres database server when the database is listening on port 5433
>> (instead of port 5432)
>>
>>
>>
>> Hi Ron,
>>
>>
>>
>> It was a firewall issue on the postgres database server. I think the
>> firewall only opened up the default port 5432 when postgres was installed.
>>
>> I stopped the firewall on the postgres database server  and now I am able
>> to connect from pgadmin.
>>
>>
>>
>> Thanks and regards,
>>
>>
>>
>> *Bikram Majumdar*
>>
>> Sr Software Developer/DBA, Aqsacom Inc.
>>
>> *c.* 1.972.365.3737
>>
>>
>>
>> <http://www.aqsacom.com/>
>>
>>
>>
>> *Disclaimer. *This electronic mail message contains CONFIDENTIAL
>> information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED
>> COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE PROTECTED
>> BY LAW FROM DISCLOSURE, and (b) intended only for the use of the
>> Addressee(s) named herein. If you are not an Addressee, or the person
>> responsible for delivering this to an Addressee, you are hereby notified
>> that reading, copying, or distributing this message is prohibited. If you
>> have received this electronic mail message in error, please reply to the
>> sender and take the steps necessary to delete the message completely from
>> your computer system. Statement and opinions expressed in this e-mail are
>> those of the sender, and do not necessarily reflect those of AQSACOM.
>> AQSACOM accepts no liability for any damage caused by any virus/worms
>> transmitted by this email.
>>
>>
>>
>> *From:* Ron <[email protected]>
>> *Sent:* Monday, August 12, 2019 5:14 PM
>> *To:* [email protected]
>> *Subject:* Re: Need help in establishing pgadmin4 to connect to the
>> postgres database server when the database is listening on port 5433
>> (instead of port 5432)
>>
>>
>>
>> There are more firewalls than just the one running (or not) on cemtore01.
>>
>> Keep things simple and just run a traceroute from the server running
>> pgadmin4 to the server running postgres.
>>
>> If that works, then telnet to the server on port 5433
>>
>> On 8/12/19 4:51 PM, Bikram MAJUMDAR wrote:
>>
>> Hi Tim,
>>
>>
>>
>> Thanks for your quick response.
>>
>> Are you thinking port 5433 is not opened for listening on the postgres
>> database server?
>>
>> [root@cemtore01 ~]# systemctl status firewalld.service
>>
>> â firewalld.service - firewalld - dynamic firewall daemon
>>
>>    Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled;
>> vendor preset: enabled)
>>
>>    Active: active (running) since Mon 2019-04-01 05:49:28 CDT; 4 months
>> 11 days ago
>>
>>      Docs: man:firewalld(1)
>>
>> Main PID: 883 (firewalld)
>>
>>    CGroup: /system.slice/firewalld.service
>>
>>            ââ883 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid
>>
>>
>>
>> Apr 01 05:49:28 cemtore01 systemd[1]: Started firewalld - dynamic
>> firewall daemon.
>>
>> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: ICMP type
>> 'beyond-scope' is not supported by the kernel for ipv6.
>>
>> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: beyond-scope:
>> INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
>>
>> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: ICMP type
>> 'failed-policy' is not supported by the kernel for ipv6.
>>
>> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: failed-policy:
>> INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
>>
>> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: ICMP type
>> 'reject-route' is not supported by the kernel for ipv6.
>>
>> Apr 01 05:49:30 cemtore01 firewalld[883]: WARNING: reject-route:
>> INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
>>
>> May 22 11:25:23 cemtore01 firewalld[883]: ERROR: INVALID_ZONE: port
>>
>> May 22 11:25:40 cemtore01 firewalld[883]: ERROR: INVALID_ZONE: ports
>>
>> May 22 11:27:07 cemtore01 firewalld[883]: ERROR: INVALID_ZONE: zone
>>
>>
>>
>> *Bikram Majumdar*
>>
>> Sr Software Developer/DBA, Aqsacom Inc.
>>
>> *c.* 1.972.365.3737
>>
>>
>>
>> <http://www.aqsacom.com/>
>>
>>
>>
>> *Disclaimer. *This electronic mail message contains CONFIDENTIAL
>> information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED
>> COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE PROTECTED
>> BY LAW FROM DISCLOSURE, and (b) intended only for the use of the
>> Addressee(s) named herein. If you are not an Addressee, or the person
>> responsible for delivering this to an Addressee, you are hereby notified
>> that reading, copying, or distributing this message is prohibited. If you
>> have received this electronic mail message in error, please reply to the
>> sender and take the steps necessary to delete the message completely from
>> your computer system. Statement and opinions expressed in this e-mail are
>> those of the sender, and do not necessarily reflect those of AQSACOM.
>> AQSACOM accepts no liability for any damage caused by any virus/worms
>> transmitted by this email.
>>
>>
>>
>> *From:* Tim Scheurenbrand <[email protected]>
>> <[email protected]>
>> *Sent:* Monday, August 12, 2019 4:25 PM
>> *To:* Bikram MAJUMDAR <[email protected]>
>> <[email protected]>; [email protected]
>> *Cc:* [email protected]
>> *Subject:* Re: Need help in establishing pgadmin4 to connect to the
>> postgres database server when the database is listening on port 5433
>> (instead of port 5432)
>>
>>
>>
>> Hi Bikram
>>
>> Have you checked your firewall settings?
>>
>> Tim Scheurenbrand
>>
>>
>>
>> On Mon, Aug 12, 2019 at 11:08 PM +0200, "Bikram MAJUMDAR" <
>> [email protected]> wrote:
>>
>>
>>
>> Hi ,
>>
>> We need help in resolving connection issues using the pgadmin tool.
>>
>> We had our pgadmin (pgadmin4) installed a few months back on windows 10
>> and we were able to use it for  our postgres server running on port 5432.
>>
>> But, recently we had to change our postgres server port from 5433 to 5432
>> -
>>
>> And accordingly, in pgadmin we changed the port also to 5433 – but we are
>> receiving connection timed out error in connecting to our server (see below
>> screen shot).
>>
>>
>>
>>
>>
>>
>>
>> Please help to resolve this issue.
>>
>>
>>
>> *Bikram Majumdar*
>>
>> Sr Software Developer/DBA, Aqsacom Inc.
>>
>> *c.* 1.972.365.3737
>>
>> *e.* [email protected]
>>
>> *s.* BIKRAM MAJUMDAR
>>
>>
>>
>> <http://www.aqsacom.com/>
>>
>>
>>
>> *Disclaimer. *This electronic mail message contains CONFIDENTIAL
>> information which is (a) CUSTOMER / SUPPLIER / PARTNER PRIVILEGED
>> COMMUNICATION, WORK PRODUCT, PROPRIETARY IN NATURE, OR OTHERWISE PROTECTED
>> BY LAW FROM DISCLOSURE, and (b) intended only for the use of the
>> Addressee(s) named herein. If you are not an Addressee, or the person
>> responsible for delivering this to an Addressee, you are hereby notified
>> that reading, copying, or distributing this message is prohibited. If you
>> have received this electronic mail message in error, please reply to the
>> sender and take the steps necessary to delete the message completely from
>> your computer system. Statement and opinions expressed in this e-mail are
>> those of the sender, and do not necessarily reflect those of AQSACOM.
>> AQSACOM accepts no liability for any damage caused by any virus/worms
>> transmitted by this email.
>>
>>
>>
>>
>>
>> --
>> Angular momentum makes the world go 'round.
>>
>>