Re: Borland c++ compile problems...
Steve Holdoway <[email protected]>
| Newsgroups | gmane.comp.db.postgresql.devel.win32 |
|---|---|
| Message-ID | <[email protected]> |
Bruce Momjian wrote:
>Steve Holdoway wrote:
>
>
>>Bruce Momjian wrote:
>>
>>
>>
>>>Steve Holdoway wrote:
>>>
>>>
>>>
>>>
>>>>Sorry to be a pest, and all that. However, it looks like make needs to
>>>>be run in src\port, to create pg_config_paths.h, and compile stuff to
>>>>resolve externals _set_noblock, _pg_strcasecmp, _pg_tolower, and _popen
>>>>(? bit worried about that one!)
>>>>
>>>>I had a go at rewriting an existing bcc32.mak, but just seemed to
>>>>generate more errors!
>>>>
>>>>
>>>>
>>>>
>>>Uh, I don't see how those would fail. What errors are you seeing?
>>>
>>>
>>>
>>>
>>>
>>Well, in the port subdirectory, one of the things that is generated by
>>the makefile is pg_config_paths.h. Without this, libpq will not compile.
>>As I stated above, cobbling this together manually then gets me to the
>>place where the aforementioned external references are not resolved. All
>>are in source files in the port directory.
>>
>>The errors I'm seeing are all caused by includes not being found, etc. I
>>don't know what to do when they are ones like strings.h, which I do not
>>have either in the snapshot source tree, or in the Borland bcc 5.5 tree.
>>
>>I also don't know how you want the above files building... into a
>>library, static or dynamic/straight object code, etc. There is also no
>>listing in the current bcc32.mak files to include them into the libpq
>>dll generation.
>>
>>
>
>OK, if you look at the last few commits to interfaces/libpq/win32.mak,
>you will see changes for pg_config_paths.h and for thread safety. Can
>you look at those changes, merge them into bcc.mak. There might be
>other changes in there you want to add to bcc.mak too.
>
>
>
OK, having no M$ diff, I attach files src\interfaces\libpq\bcc32.mak and
src\interfaces\libpq\win32.h
bcc32.mak incorporates the changes in win32.mak, and adds a couple of
extra source files from the ..\..\port directory, and win32.h was used
to #define popen -> _popen.
All seems to work after a *very* cursory test!
Can I get back to the land of proper slashes now???
Cheers,
Steve
---------------------------(end of broadcast)---------------------------
TIP 3: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to [email protected] so that your
message can get through to the mailing list cleanly
bcc32.mak
(text/plain, 4.5 KB)
# Makefile for Borland C++ 5.5
# Will build a Win32 static library libpq.lib
# and a Win32 dynamic library libpq.dll with import library libpqdll.lib
# Borland C++ base install directory goes here
BCB=c:\Borland\Bcc55
!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF
!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make -DCFG=[Release | Debug] /f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF
!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF
!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!else
OUTDIR=.\Release
INTDIR=.\Release
!endif
USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;
CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -WD -c -D$(USERDEFINES) -tWM \
-a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc
!IFDEF DEBUG
CPP_PROJ = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ = $(CPP_PROJ) -O -Oi -OS -DNDEBU
!endif
LIB32=tlib.exe
LIB32_FLAGS=
LIB32_OBJS= \
"$(OUTDIR)\win32.obj" \
"$(INTDIR)\getaddrinfo.obj" \
"$(INTDIR)\thread.obj" \
"$(INTDIR)\inet_aton.obj" \
"$(INTDIR)\crypt.obj" \
"$(INTDIR)\path.obj" \
"$(INTDIR)\noblock.obj" \
"$(INTDIR)\pgstrcasecmp.obj" \
"$(INTDIR)\dllist.obj" \
"$(INTDIR)\md5.obj" \
"$(INTDIR)\ip.obj" \
"$(INTDIR)\fe-auth.obj" \
"$(INTDIR)\fe-protocol2.obj" \
"$(INTDIR)\fe-protocol3.obj" \
"$(INTDIR)\fe-connect.obj" \
"$(INTDIR)\fe-exec.obj" \
"$(INTDIR)\fe-lobj.obj" \
"$(INTDIR)\fe-misc.obj" \
"$(INTDIR)\fe-print.obj" \
"$(INTDIR)\fe-secure.obj" \
"$(INTDIR)\pqexpbuffer.obj" \
"$(INTDIR)\wchar.obj" \
"$(INTDIR)\encnames.obj"
RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"
LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"
# ---------------------------------------------------------------------------
.path.obj = $(INTDIR)
.path.c = .;..\..\port;..\..\backend\libpq;..\..\backend\lib;..\..\backend\utils\mb
# ---------------------------------------------------------------------------
ALL: config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"
CLEAN :
-@erase "$(INTDIR)\getaddrinfo.obj"
-@erase "$(INTDIR)\thread.obj"
-@erase "$(INTDIR)\inet_aton.obj"
-@erase "$(INTDIR)\crypt.obj"
-@erase "$(INTDIR)\path.obj"
-@erase "$(INTDIR)\dllist.obj"
-@erase "$(INTDIR)\md5.obj"
-@erase "$(INTDIR)\ip.obj"
-@erase "$(INTDIR)\fe-auth.obj"
-@erase "$(INTDIR)\fe-protocol2.obj"
-@erase "$(INTDIR)\fe-protocol3.obj"
-@erase "$(INTDIR)\fe-connect.obj"
-@erase "$(INTDIR)\fe-exec.obj"
-@erase "$(INTDIR)\fe-lobj.obj"
-@erase "$(INTDIR)\fe-misc.obj"
-@erase "$(INTDIR)\fe-print.obj"
-@erase "$(INTDIR)\fe-secure.obj"
-@erase "$(INTDIR)\pqexpbuffer.obj"
-@erase "$(OUTDIR)\libpqdll.obj"
-@erase "$(OUTDIR)\win32.obj"
-@erase "$(INTDIR)\wchar.obj"
-@erase "$(INTDIR)\encnames.obj"
-@erase "$(INTDIR)\noblock.obj"
-@erase "$(INTDIR)\pgstrcasecmp.obj"
-@erase "$(OUTDIR)\libpq.res"
-@erase "$(OUTDIR)\blibpq.lib"
-@erase "$(OUTDIR)\blibpqdll.lib"
-@erase "$(OUTDIR)\blibpq.dll"
-@erase "$(OUTDIR)\blibpq.tds"
config: ..\..\include\pg_config.h pthread.h pg_config_paths.h
..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h
pthread.h: pthread.h.win32
copy pthread.h.win32 pthread.h
pg_config_paths.h: win32.mak
echo #define SYSCONFDIR "" >pg_config_paths.h
"$(OUTDIR)" :
@if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) "$(INTDIR)\libpq.res" blibpqdll.def
$(LINK32) @&&!
$(LINK32_FLAGS) +
c0d32.obj $(LINK32_OBJS), +
$@,, +
"$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
blibpqdll.def,"$(INTDIR)\libpq.res"
!
implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@
"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
$(RSC) $(RSC_PROJ) libpq.rc
"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
$(LIB32) $@ @&&!
+-"$(**: =" &^
+-")"
!
.c.obj:
$(CPP) -o"$(INTDIR)\$&" $(CPP_PROJ) $<
win32.h
(text/x-c-header, 756 B)
#ifndef __win32_h_included #define __win32_h_included /* * Some compatibility functions */ #ifdef __BORLANDC__ #define _timeb timeb #define _ftime(a) ftime(a) #define _errno errno #define popen(a,b) _popen(a,b) #else /* open provided elsewhere */ #define close(a) _close(a) #define read(a,b,c) _read(a,b,c) #define write(a,b,c) _write(a,b,c) #endif #define vsnprintf(a,b,c,d) _vsnprintf(a,b,c,d) #define snprintf _snprintf #undef EAGAIN /* doesn't apply on sockets */ #undef EINTR #define EINTR WSAEINTR #define EWOULDBLOCK WSAEWOULDBLOCK #define ECONNRESET WSAECONNRESET #define EINPROGRESS WSAEINPROGRESS /* * support for handling Windows Socket errors */ extern const char *winsock_strerror(int err, char *strerrbuf, size_t buflen); #endif