| Newsgroups |
gmane.comp.emulators.hercules390.general |
| Message-ID |
<CAPcd4G9-H4c56u2xz_1xttgH+NQeHXN=8MwP=wUKnHoW9upY1Q@mail.gmail.com> |
Yep, its there :) I had a 9370 with it ...
Joe
On Sun, Mar 17, 2019 at 12:20 PM 'Dave Wade' [email protected]
[hercules-390] <[email protected]> wrote:
>
>
> Joe,
>
> I don’t ever remember CKD emulation on these? Weren’t they one of the
> original 9370 drives, which were FBA only? This meant the 9370 was really
> only good for VM/SP because the built in drives were not supported by MVS..
>
> Dave
>
>
>
> *From:* [email protected] <[email protected]>
> *Sent:* 17 March 2019 13:46
> *To:* [email protected]
> *Subject:* Re: [hercules-390] PDOS/3x0 on real hardware
>
>
>
>
>
>
> Dave,
>
>
>
> The 9335 is both the controller and the DASD ...
>
>
>
> -A01 is the controller
>
> -B01 are the drives (up to four) (850MB each)
>
>
>
> Joe
>
>
>
> On Sun, Mar 17, 2019 at 8:13 AM 'Dave Wade' [email protected]
> <[email protected]> [hercules-390] <[email protected]>
> wrote:
>
>
>
> Joe,
>
> On what controller. All the 9335’s I have met were pure FBA, but its
> been a long time…
>
> Dave
>
>
>
> *From:* [email protected] <[email protected]>
> *Sent:* 17 March 2019 12:57
> *To:* [email protected]
> *Subject:* Re: [hercules-390] PDOS/3x0 on real hardware
>
>
>
>
>
> "However, this 9335 DASD is FBA, so
> not supported."
>
>
>
> Says who?
>
>
>
> With ICKDSF, you can initialize a 9335 as an emulated CKD device.
> Thereafter, it performs as a CKD device...
>
>
>
> Joe
>
>
>
> On Sun, Mar 17, 2019 at 7:10 AM kerravon86-/[email protected] [hercules-390] <
> [email protected]> wrote:
>
>
>
> ---In [email protected], <Mcguire@...> wrote :
>
> Ok, good news. I have updated PDOS so that
> although it still uses blocks of 18452, those
> blocks can be put onto any device type, e.g.
> I tested with 3350 disks.
>
> Also I have successfully switched off EA
> and the S/370 build now uses 16 MiB.
>
> > S/390 hardware at the museum. The first of the S/370s (a 9375) is
> > nearing runnable status; it has 9335 DASD.
>
> However, this 9335 DASD is FBA, so
> not supported.
>
> Regardless, I'm now in a position to generate
> any sort of CKD disk drive and terminal type
> for the I/O gen. So let me know what you
> would like and I'll generate them. I suggest
> we move discussion to the hercules-os380
> group because no-one ever accuses me of
> being off-topic there.
>
> What I would like to work on next is to
> create an EBCDIC ANSI terminal using a
> PC so that micro-emacs can run on real
> hardware. So I'd like to pick up that
> discussion over there.
>
> BFN. Paul.
>
>
>
>
>
>
>
>