Re: Re: RHEL 7.x installation

"Harold Grovesteen [email protected] [hercules-390]" <[email protected]>
Newsgroups gmane.comp.emulators.hercules390.general
Message-ID <[email protected]> 
On Wed, 2019-06-05 at 21:38 +0000, [email protected] [hercules-390]
wrote:
> 
> 
> 
> Here's my current generic.prm (it's changing every 5 minutes as I try
> all kinds of things).
> One thing I'm not sure about is the "ip=" parameter.  The gateway IP
> address, 192.168.1.72, is my host PC IP address.  Not sure if that
> should be something else though.  I've tried the gateway IP address
> my Windows PC uses, 192.168.1.254, doesn't make any difference.
> rd.debug
> ip=192.168.1.151::192.168.1.72:24:foobar.systemz.example.com::none
> rd.dasd=0.0.0120 rd.dasd=0.0.0120 rd.dasd=0.0.0121 rd.dasd=0.0.0122
> inst.repo=http://192.168.1.72/ inst.text
> inst.stage2=http://192.168.1.72/images/install.img ro
> ramdisk_size=40000 cio_ignore=all,!condev
> 
Networking requirements differ depending upon which host operating
system you are using for Hercules.

Please identify your host operating system.

Thanks,
Harold Grovesteen
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.