RE: Re: GCIC Fullscreen applications

HEX  is a line command on a specific record not on the command line
 
Check in HEXwhat is there for the tilde character
 
 
CH /rocky/KUKURIKO/
 
Will change the entire file from top to bottom - Only first occurrence on a
specific line
Will shift characters to the right if the second filed is larger than the
first - or shift characters to the left if the first field is larger that
the second.
No shifting should occur after the trunc position.
 
Example- assembler
Pos 73-80 is usually a numeric sequence
Pos 72 is  the continuation line if you have a coninuing macro or constant
 
YOU CANNOT SHIFT THOSE CHARACTERS --
 
SINCE most assembler programs have a sequence Number without the TRUNC 71 -
YOu could not insert anything where field 2 is larger than field one. ever. 
Because that would mean shifting the numbers out also logic with shifting
the continuation,
 With trunc 71 - the characters shifted out are shifted up until pos 71.
 
No characters other than blanks or nulls will be shifted out --
YOU get a message and the line is not changed at all ifpos 71 is not
available.
Or 70-and 71 if you need to add two characters - ETC.
 
 
 
Roc
 



  _____  

From: [email protected] [mailto:[email protected]] On Behalf Of
Mike Stramba
Sent: Sunday, August 15, 2010 20:37 
To: [email protected]
Subject: Re: [H390-VM] Re: GCIC Fullscreen applications


  

Hi Roc,

1) I tried HEX ... HEX on .... nothing happens

2) The 'tilde' character " ~ " is displayed as a blank

3) I'm not sure how the CH and TRUNC work together. Would be nice
to have CH default to first found occurence, with an option CH
/foo/bar/g /g = global ...... maybe also /nnn .e.g CH
/foo/bar/5 (change the next five occurences.

Everything else seems to be working.

Great work!

MIke

On 8/15/10, Rocky <[email protected] <mailto:rocsystems%40gmail.com> >
wrote:
>
> All -
>
> The "BETA" is now a beta.
>
> I have it installed on the public server.
> rocsys.dyndns.org port 3277
> D CMSUSER
>
> When it asks for user id -
> Tstusr1 tstuser1
> Tstusr2 tstuser2
> Maint ****
>
> Are all valid passwords.
>
> The EDIT application is now a full beta.
> summary of commands. Screens have changed slightly.
>
> Command Line:
> TOP
> BOT
> /search will find imbeded blanks but not trailing blanks
> from current position to end
> Find xxx Find rocky will find rocky but not roc
> from start of file to end
> CMS and a CP or CMS command (External control currently only link
> will execute the command acc rel and q are allowed)
> CH /xxx/xxx/ from top of file adn up to trunc
> TRUNC works with change (Defaults in there but you can change Them)
>
> FILE or SAVE will save the file
> NULLS ON OFF
> CAPS ON OFF
> FN changes the file name
> FM changes the File mode
> FT Changes the File TYPE
> UP nn moves the screen up nn lines
> Down nn moves the screen down nn lines
> RESET resets the cc c f mm m move attributes
>
> ----------
>
> PF's SHIFT RIGHT 20 Shift LEFT 20
> PF3 exit (no warnings if you didnt save it - you lost it)
> Auto disconnect in 20 minutes of no activity
> PF7 PF8
> PF5 is a repeat search
> ------------------------------
>
> LINE COMMANDS
>
> CC CC F
> MM MM F
> C F
> M F
> Innb inserts
> Dnnb deletes
>
> DD DD
>
> HEX will display the record in HEX FORMAT
> You can edit and change the data in HEX display
> Enter without any command or action will display the logical cursor
position
> - (Cursor remains in same POS)
>
> successive Enter in same pos will bring cursor to command line.
>
> For the last week I have been writing the Editor in the EDITOR.
> ===============================================================
> Pretty good. I have used lots of worse tools.
> Want some feedback -
>
> As soon as I get feedback one way or the other I will put it on the
website
> and you can download.
>
> Two versions - the application for those that just want to use it
> The application and sources and listings etc. for developers by request.
>
> No problems about the sources but I'd like to know who is really
interested
> in the logic and the mehodology as opposed to who needs to use it only.
>
> Some of this stuff is complicated and will need explanations.
>
> I'll get a simple manual out to go with this. This was just from memory
> -there might be more:-)
>
> Meanwhile I need feed back. Please try it out-
> No feedback - no application.
> I want to do this once.
>
> Next project is a full screen debugger for VM/370 - Just thinking about
that
> now - any ideas are welcome.
>
> You can use this as a single user interface - it disconnects automatically
> when you start and you do the editing etc. via dial
> When you log on again (reconnect) the application automatically
> Ends and yo are back in your machine.
>
> Or as a multi user interface.
> NEEDS BC MODE
>
>
> Roc
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>