Re: VMFPLC2 DUMP malfunction in sixpack 1.2 environment

Gregg Levine <[email protected]>
Newsgroups gmane.comp.emulators.hercules390.vm
Message-ID <[email protected]>
On Tue, Aug 24, 2010 at 6:14 PM, Dave Wade <g4ugm-/rAkYNWUBEC+PENguQupYdBc4/[email protected]> wrote:
> Ivan,
>
> The starter system tape was included in Bob Abeles original distribution,
> and I assume that its "unadulterated" as I don't believe that there ever was
> a SEPP or BSEPP starter tape. Note it is just a starter system, there is no
> matching "product" tape so just the "S" disk and MAINTs sample disks. There
> is also some source for it on Bob Abeles original system but I have never
> tried to assemble it. I have also never tried to compare the content of the
> "S" disk on the starter system with the "S" disk as distributed by Bob.
> There is also a VMFPLC2 on the PTF-616 tape which is different to the one on
> the 6-pack update 1.2 so perhaps Wolfgang could try that if the one on the
> six pack does not work...
>
> Dave Wade G4UGM
> Illegitimi Non Carborundum
>
> p.s. The original starter system and ptf-616 tapes are here:-
>
> http://www.cbttape.org/vm6.htm
>
> or here (scroll to the bottom)
>
> http://www.smrcc.org.uk/members/g4ugm/VM370.htm
>
> Dave
>
>
>> -----Original Message-----
>> From: [email protected]
>> [mailto:[email protected]] On Behalf Of Ivan Warren
>> Sent: 24 August 2010 22:49
>> To: [email protected]
>> Subject: Re: [H390-VM] VMFPLC2 DUMP malfunction in sixpack
>> 1.2 environment
>>
>>
>> On 8/24/2010 11:43 PM, Dave Wade wrote:
>> > However I am not sure the source matchs the object on the starter
>> > system, which I would assume is "kosher" as the starter is
>> a true base
>> > VM/370 tape....
>> >
>>
>> Wait wait...
>>
>> Are you telling me you have a genuine unaldurated VM/370
>> starter system ?
>>
>> ME WANT IT !
>>
>> --Ivan
>>

Hello!
Dave, regarding that starter tape, (Yes I have the BobA system here,
and at home.), I understand how to create a disk, did that for the
original example of the system. But what about applying the tape
itself? Once I've created the disk, lets call it "starter.3330" and
added it to the configuration file, then what?

Yes, we've gone over it before, but I want to make sure I properly
understand it. (Lack of time and real life work got into the way
before.)
-----
Gregg C Levine [email protected]
"This signature fought the Time Wars, time and again."
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.