[PATCH v3 7/7] hw/cxl: clear poison lists and feature transfer state on reset

The poison lists (active, backup, and scan-media results), their
associated overflow tracking, and the Set Feature partial-transfer
state are all device-internal dynamic state that accumulates during
the device's lifetime.

Per CXL r4.0 Table 8-309 (Identify Memory Device), the "Injects
Persistent Poison" capability bit (offset 41h, Bit[0]) controls poison
retention across reset.  When cleared — the QEMU default — "a
Conventional Reset or CXL Reset shall automatically clear the injected
poison."  Clear all poison lists accordingly, reusing the existing
cxl_clear_poison_list_overflowed() helper for the overflow tracking.

For the Set Feature transfer state, CXL r4.0 Section 8.2.10.6.3 (Set
Feature) requires: "If the Feature data transfer is interrupted by a
Conventional Reset or a CXL Reset, the Feature data transfer shall be
aborted by the device [...] the device shall require the Feature data
transfer to be started from the beginning."  Zero set_feat_info on
reset so any partially transferred Set Feature is abandoned and must
restart from the beginning.

Both clears run after the RESET_TYPE_WAKEUP early-return added in the
previous patch, so this state is preserved across a suspend-to-RAM
wakeup.

Signed-off-by: Junjie Cao <[email protected]>
---
 hw/mem/cxl_type3.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 2392358071..0b36485344 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -1327,6 +1327,16 @@ MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
     return address_space_write(as, dpa_offset, attrs, &data, size);
 }
 
+static void ct3d_clear_poison_list(CXLPoisonList *list)
+{
+    CXLPoison *ent, *next;
+
+    QLIST_FOREACH_SAFE(ent, list, node, next) {
+        QLIST_REMOVE(ent, node);
+        g_free(ent);
+    }
+}
+
 static void ct3d_reset_hold(Object *obj, ResetType type)
 {
     CXLType3Dev *ct3d = CXL_TYPE3(obj);
@@ -1377,6 +1387,14 @@ static void ct3d_reset_hold(Object *obj, ResetType type)
         ct3d->cxl_dstate.event_logs[i].irq_enabled = false;
     }
     ct3d->scan_media_hasrun = false;
+
+    ct3d_clear_poison_list(&ct3d->poison_list);
+    ct3d_clear_poison_list(&ct3d->poison_list_bkp);
+    ct3d_clear_poison_list(&ct3d->scan_media_results);
+    ct3d->poison_list_cnt = 0;
+    cxl_clear_poison_list_overflowed(ct3d);
+
+    memset(&ct3d->set_feat_info, 0, sizeof(ct3d->set_feat_info));
 }
 
 static const Property ct3_props[] = {
-- 
2.43.0