RE: Re: I have another issue with Hercules: ** Win32 porting error: invalid call ...

Thanks so much for this explanation!

 

Roger

 

From: [email protected] [mailto:[email protected]] On
Behalf Of halfmeg
Sent: Tuesday, September 07, 2010 12:11 PM
To: [email protected]
Subject: [turnkey-mvs] Re: I have another issue with Hercules: ** Win32
porting error: invalid call ...

 

  



> Small wrote:

> I'm not sure if this is the right place to post this. If not,
> please let me know.

Not sure whether it is a Hercules or a Hercules on Windows issue. Posting in
hercules-390 forum would likely be best place for this.

> I've been geeing these errors on hercules lately, while running the
> TK system. Once this happens, I cannot recover, and the system is
> dead until I restart Hercules!

><snip> 

> 07:37:17 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:0010
> 07:37:23 ipl 0148

><snip>

> 07:37:32 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:00C0
> 07:37:32 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:00C1
> 07:37:33 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:00C2
> 07:37:33 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:00C3
> 07:39:03 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:00C4
> 07:39:08 HHCTE007I 3270 device 00C4 client 127.0.0.1 connection closed
> 07:39:15 HHCTE009I Client 127.0.0.1 connected to 3270 device 0:00C4
> 07:39:20 HHCTE007I 3270 device 00C4 client 127.0.0.1 connection closed
> 07:40:37 console: DBG032: select failed: An operation was attempted on
something that is not a socket.
> 07:40:37 ** Win32 porting error: invalid call to 'w32_select' from
console.c(2129): mixed set(s)

><snip>

There has been a problem ( bug ? ) when numerous 3270 terminals are started
all at once. Noted above that 0C4 is delayed 1.5 minutes to connect after
0C1-0C3 connect and then disconnects 5 seconds later. Connects again after 7
seconds and disconnects again 5 seconds later. This may be the cause of the
repeated messages and 'hang' you are experiencing.

Believe some have inserted a pause of 1 or 2 seconds or similar in the
startup script between start of each terminal.

Phil - YMMV