Re: CIPE works, but there is routing problem I can't solve

Phil Scarratt <[email protected]>
Newsgroups gmane.comp.encryption.cipe
Organization Draxsen Technologies
Message-ID <[email protected]>
Sounds like IP forwarding is not enabled on the XP box. Not sure where 
this is - I know there's aregistry entry somewhere. Try googling for IP 
packet forwarding and see what comes up.

Fil

Dragan Matic wrote:
> I need to connect two separate networks, both with assigned public IP
> addresses, with Linux on one side and XP on the other side acting as a
> gateways for cipe networking.
> 
> Net A          Router A    internet      Router B         Net B
> 192.168.10.--|192.168.10.5|-------------|192.168.1.1|---- 192.168.1.
>              | 192.168.4.1|             |192.168.4.2|
>                    CIPE 1.                   CIPE 2
>                (Linux - RH9)              (Win XP Pro)
> 
> Gateway A and Gateway B CIPE interfaces see each other. Every host on
> net A can see CIPE 2 interface as well as 192.168.1.1 address (they are
> on the same computer). Gateway B can see every host on Net A. The
> problem are the other computers on Net B, because they can't see CIPE 1
> interface. So if I ping 192.168.4.2 (CIPE 2) from any host on net B they
> can see it, but they can't see 192.168.4.1 (CIPE 1). Also, none of the
> computers on Net A can see anything beyond 192.168.1.1.
> 
> Router B (Win XP)
> - Router B is set up as default gateway for each computer on Net B
> - Router B route for Net A is set up as:
> route add 192.168.10.0 mask 255.255.255.0 192.168.4.1
> 
> Router A (Linux)
> - Router A is set up as default gateway for each computer on Net A
> - Router A route for Net B is set up as
> route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.4.2
> 
> Obviously I am missing something, but what? I think problem is in XP,
> can it work as a router this way, or I have to set something else up?
> Tnx in advance.
> 
> Dragan
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> Message sent by the [email protected] mailing list.
> Unsubscribe: mail [email protected], "unsubscribe cipe-l" in body
> Other commands available with "help" in body to the same address.
> CIPE info and list archive: 
> <URL:http://sites.inka.de/~bigred/devel/cipe.html>


-- 
Phil Scarratt
Draxsen Technologies
IT Contractor
0403 53 12 71


--
Message sent by the [email protected] mailing list.
Unsubscribe: mail [email protected], "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.