Re: new AK910 reader spotted

Umberto Rustichelli aka Ubi <[email protected]>
Newsgroups gmane.comp.encryption.opensc.devel
Message-ID <[email protected]> 
Sorry, wrong list.
I just posted this one to the PCSC-Muscle list

On 10/20/2017 03:22 PM, Umberto Rustichelli aka Ubi wrote:
> Dear developers,
>
> I just stumbled on a smart card reader that should be an AK910, that 
> is packed with a hub plus storage, I think it would be a good thing to 
> have it supported.
>
> The seller page is https://www.pec.it/cns-arubakey.aspx (sorry, 
> language is Italian).
>
> The vendorID:deviceID are 2021:0002 (I see CCID has provisions for 
> 0001, 0011 and 0101 but not 0002).
>
>
> This is what I read in the logs at insertion time:
>
> Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: new high speed USB 
> device number 12 using xhci_hcd
> Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: New USB device 
> found, idVendor=058f, idProduct=6254
> Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: New USB device 
> strings: Mfr=0, Product=0, SerialNumber=0
> Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: configuration #1 
> chosen from 1 choice
> Oct 20 16:39:40 pes-app-blank-01 kernel: hub 1-11:1.0: USB hub found
> Oct 20 16:39:40 pes-app-blank-01 kernel: hub 1-11:1.0: 4 ports detected
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: new high speed 
> USB device number 13 using xhci_hcd
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: New USB device 
> found, idVendor=1307, idProduct=0165
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: New USB device 
> strings: Mfr=1, Product=2, SerialNumber=3
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: Product: USB Mass 
> Storage Device
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: Manufacturer: 
> USBest Technology
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: SerialNumber: 
> 000000000002BA
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: configuration #1 
> chosen from 1 choice
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: new full speed 
> USB device number 14 using xhci_hcd
> Oct 20 16:39:41 pes-app-blank-01 kernel: Initializing USB Mass Storage 
> driver...
> Oct 20 16:39:41 pes-app-blank-01 kernel: scsi7 : SCSI emulation for 
> USB Mass Storage devices
> Oct 20 16:39:41 pes-app-blank-01 kernel: usbcore: registered new 
> interface driver usb-storage
> Oct 20 16:39:41 pes-app-blank-01 kernel: USB Mass Storage support 
> registered.
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: New USB device 
> found, idVendor=2021, idProduct=0002
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: New USB device 
> strings: Mfr=1, Product=2, SerialNumber=0
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: Product: HKey
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: Manufacturer: AK910
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: configuration #1 
> chosen from 1 choice
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: ep 0x2 - rounding 
> interval to 64 microframes, ep desc says 80 microframes
> Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: ep 0x82 - 
> rounding interval to 64 microframes, ep desc says 80 microframes
> Oct 20 16:39:41 pes-app-blank-01 kernel: generic-usb 
> 0003:2021:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [AK910 
> HKey] on usb-0000:00:14.0-11.2/input0
> Oct 20 16:39:42 pes-app-blank-01 kernel: scsi 7:0:0:0: 
> Direct-Access                               0.00 PQ: 0 ANSI: 2
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: Attached scsi 
> generic sg2 type 0
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] 1972744 
> 512-byte logical blocks: (1.01 GB/963 MiB)
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Write 
> Protect is off
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Assuming 
> drive cache: write through
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Assuming 
> drive cache: write through
> Oct 20 16:39:42 pes-app-blank-01 kernel: sdb:
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Assuming 
> drive cache: write through
> Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Attached 
> SCSI removable disk
>
>
> This is the lsusb output:
>
>
>
> Bus 001 Device 013: ID 2021:0002
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         8
>   idVendor           0x2021
>   idProduct          0x0002
>   bcdDevice            1.00
>   iManufacturer           1 AK910
>   iProduct                2 HKey
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           41
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0x80
>       (Bus Powered)
>     MaxPower              100mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass         3 Human Interface Device
>       bInterfaceSubClass      0 No Subclass
>       bInterfaceProtocol      0 None
>       iInterface              0
>         HID Device Descriptor:
>           bLength                 9
>           bDescriptorType        33
>           bcdHID               1.00
>           bCountryCode            0 Not supported
>           bNumDescriptors         1
>           bDescriptorType        34 Report
>           wDescriptorLength      34
>          Report Descriptors:
>            ** UNAVAILABLE **
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval              10
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval              10
> Device Status:     0x0000
>   (Bus Powered)
>
> Best regards
>
>     Umberto Rustichelli
>
>
>
> ------------------------------------------------------------------------------ 
>
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Opensc-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/opensc-devel
>
> -- 
> Questo messaggio e' stato analizzato con Libra ESVA ed e' risultato 
> non infetto.
> Seguire il link qui sotto per segnalarlo come spam: 
> https://esva.gt50.org/cgi-bin/learn-msg.cgi?id=37626400C3.AB22C
>
>


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Opensc-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensc-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.