Re: OpenSC and Yubikey 4 (OpenPGP)

I saw that issue before. Thank you for looking into it.

What is the easiest/best way to disable PIV for now in the config file?


W dniu 31.12.2017 o 14:41, Douglas E Engert pisze:
> You may want to read this issue and the comment:
> https://github.com/OpenSC/OpenSC/issues/953#issuecomment-353591483
> 
> The main problem comes from having two applets on the same card that can not both be active
> at the same time because they interfere with each other and lose the login state or two different applications
> try to have exclusive access to the card and lock each other out for long periods. Which makes it
> impossible to get the serial number or determine if the applet even exists or is being used.
> 
> Yubico could have solved this by treating the PGP and PIV apps as separate USB devices on the same Yubikey.
> They already emulate multiple USB devices but all the CCID applets look like they are on the same device.
> Best I can tell U2F does not use CCID so to the OS the Yubikey looks like multiple devices and U2F can work
> independently from the PIV or PGP.
> 
> Right now OpenSC does not have a good way to determine which applet the user wants to use, PIV or PGP,
> other then to turn off one of the drivers in the opensc.conf file. Right now, if there is a PIV applet
> It is selected.
> 
> As I said in https://github.com/OpenSC/OpenSC/issues/953#issuecomment-353591483
> I am going to look at what it would take to change the PIV driver to see if the PIV applet looks
> like it is active i.e. has some certificate or other indication that it is initialized. If not, then
> let the PGP driver have a look at it. OR use environment variable to say which one to select. OR see
> if both the PIV and PGP applets could be selected within OpenSC and present then as multiple slots to PKCS#11.
> 
> The Yubikey is the only device I know of that has two applets OpenSC can support and OpenSC only selects one.
> 
> 
> 
> On 12/30/2017 6:25 PM, Grzegorz Kulewski wrote:
>> Hello,
>>
>> Excuse me if it was answered before but I can't find it anywhere. Also excuse my ignorance in SC standards and protocols.
>>
>> I think that OpenSC supports normal OpenPGP cards for some time, directly, without software like scute. For example there is openpgp-tool and with opensc-pkcs11.so programs like Firefox can access OpenPGP card as a key/cert store for TLS client certificate auth.
>>
>> Yubikey 4 is supposed to emulate OpenPGP card (and support other protocols, including PIV and U2F). But openpgp-tool doesn't seem to work with Yubikey 4 and opensc-pkcs11.so loaded in Firefox seems to only discover PIV side of Yubikey 4. Also https://github.com/sektioneins/micro-ca-tool does not seem to talk with Yubikey 4, probably because OpenSC doesn't recognize it as OpenPGP card.
>>
>> Since in our organization we care about compatibility with "normal" OpenPGP cards, we want to configure OpenSC to support Yubikey 4 as a normal OpenPGP card (in addition or instead of PIV). Is it possible? If not: why? If yes: how?

-- 
Grzegorz Kulewski


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Opensc-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensc-devel