Re: Upcoming release 0.19.0 needs testing

Hi

MyEID card (applet version 3.3.3),  OpenSC compiled from sources
https://github.com/OpenSC/OpenSC/archive/0.19.0-rc1.tar.gz

All tests listed on the wiki give a correct result  (report below).

I have tested the initialization and upload of RSA key... and I found
error, steps to reproduce:

pkcs15-init -E
pkcs15-init -C --so-pin 00000000 --so-puk 00000000 --pin 11111111
pkcs15-init --store-pin --id 01 --pin 11111111 --puk 11111111 --so-pin
00000000
pkcs15-init -F
pkcs15-init  --store-private-key keys/rsa2048-key.pem --auth-id=1 --pin
11111111 --so-pin 00000000 --key-usage sign,decrypt --label test
Failed to store private key: Security status not satisfied

This fail is generated by "file create" operation:

Outgoing APDU (30 bytes):
00 E0 00 00 19 62 17 81 02 08 00 82 01 11 83 02 .....b..........
4B 01 86 03 11 11 FF 85 02 00 00 8A 01 00       K.............
0x7feb36626d80 10:30:41.131 [pkcs15-init]
reader-pcsc.c:213:pcsc_internal_transmit: called
0x7feb36626d80 10:30:41.132 [pkcs15-init] reader-pcsc.c:294:pcsc_transmit:
Incoming APDU (2 bytes):
69 82 i.

I searched "verify" operation in log ..  but there is no verify ..
$ OPENSC_DEBUG=255 pkcs15-init  --store-private-key keys/rsa2048-key.pem
--auth-id=1 --pin 11111111 --so-pin 00000000 --key-usage sign,decrypt
--label TEST 2>&1|grep "00 20"


Last working commit in git is f66ceab4bbc3cae529a22b5f3688076cc119bd7c,
commit 83f45cda2af16b65264103fbe0394fd422f0120d no longer works.
(gcc fail to compile ffe38fd87fc06879924759ca2e25eabb47ed6f0d,
360e95d45ac4123255a4c796db96337f332160ad,
8fe377e93b4b56060e5bbfb6f3142ceaeca744fa)



TESTS from WIKI page:
===================
Linux:
openssh without agent - working
openssh with agent - working
firefox login / TLS client auth - working

PKCS11-tool:
Please enter User PIN:
C_SeedRandom() and C_GenerateRandom():
  seeding (C_SeedRandom) not supported
  seems to be OK
Digests:
  all 4 digest functions seem to work
  MD5: OK
  SHA-1: OK
  RIPEMD160: OK
Signatures (currently only for RSA)
  testing key 0 (Certificate)
  all 4 signature functions seem to work
  testing signature mechanisms:
    RSA-X-509: OK
    RSA-PKCS: OK
    SHA1-RSA-PKCS: OK
Verify (currently only for RSA)
  testing key 0 (Certificate)
    RSA-X-509: OK
    RSA-PKCS: OK
    SHA1-RSA-PKCS: OK
Unwrap: not implemented
Decryption (currently only for RSA)
  testing key 0 (Certificate)
    RSA-X-509: OK
    RSA-PKCS: OK
No errors

WINDOWS (10, 64 bit)
cardutil -scinfo  is working, I can install certificate from card into win.
EDGE browser TLS auth fails (no pin dialog, same problem was in 0.18, but
0.17 is working)

Peter

On Tue, Aug 28, 2018 at 1:31 PM Frank Morgner <[email protected]>
wrote:

> Hi all!
>
> You'll find a pre-release of OpenSC 0.19.0 on Github
> <https://github.com/OpenSC/OpenSC/releases/tag/0.19.0-rc1>. A draft
> version of the user visible changes is available in this ticket
> <https://github.com/OpenSC/OpenSC/issues/1448>.
>
> Refer to the wiki page
> <https://github.com/OpenSC/OpenSC/wiki/Smart-Card-Release-Testing> on how
> to  systematically test your card. Please extend the page with test results
> from your smart cards.
>
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Opensc-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensc-devel