Re: afalg with OpenSSL 1.1.0f 25 May 2017
Jitendra Lulla via openssl-dev <[email protected]>
| Newsgroups | gmane.comp.encryption.openssl.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi Matt,
I have linux 4.9.37 on RHEL7.3.
[root@localhost jlulla]# uname -a
Linux localhost.localdomain 4.9.37 #1 SMP Fri Jul 21 04:52:46 PDT 2017 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost test]# OPENSSL_ENGINES=../engines/afalg ../util/shlib_wrap.sh ./afalgtest
AFALG not supported - skipping AFALG tests
PASS
[root@localhost test]#
I am getting here:
# if LINUX_VERSION_CODE <= KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2)
/*
* If we get here then it looks like there is a mismatch between the linux
* headers and the actual kernel version, so we have tried to compile with
* afalg support, but then skipped it in e_afalg.c. As far as this test is
* concerned we behave as if we had been configured without support
*/
# define OPENSSL_NO_AFALGENG
# endif
Following is the value for KERNEL_VERSION for me:
[root@localhost jlulla]# ./kernelversion (program at the bottom of this mail)
KERNEL_VERSION: 262400
LINUX_VERSION_CODE 199168
condition:1
Where should I look to fix it?
Thanks
Jitrendra
[root@localhost jlulla]# cat kernelversion.c
#define LINUX_VERSION_CODE 199168
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
#define RHEL_MAJOR 7
#define RHEL_MINOR 3
#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b))
#define RHEL_RELEASE_CODE 1795
#define RHEL_RELEASE "514"
# define K_MAJ 4
# define K_MIN1 1
# define K_MIN2 0
#include<stdio.h>
int main()
{
printf("KERNEL_VERSION: %d\n", KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2));
printf("LINUX_VERSION_CODE %d\n", LINUX_VERSION_CODE);
printf("condition:%d\n",
(LINUX_VERSION_CODE <= KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2)));
}
--------------------------------------------
On Mon, 8/14/17, Matt Caswell <[email protected]> wrote:
Subject: Re: afalg with OpenSSL 1.1.0f 25 May 2017
To: "[email protected]" <[email protected]>
Cc: "Jitendra Lulla" <[email protected]>
Date: Monday, August 14, 2017, 3:44 PM
Comments inserted.
On 14/08/17 08:20, Jitendra
Lulla wrote:
> Hi,
>
> I am trying to use afalg on Linux
4.9.37 with OpenSSL 1.1.0f.
>
> I am facing 2 issues:
>
> ONE: when I issue the speed command, I
see the following:
>
> [root@localhost
apps]# ./openssl speed -evp aes-128-cbc -engine afalg
> invalid engine "afalg"
> 139853452924736:error:2506406A:DSO support
routines:dlfcn_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
/usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
bind_engine
>
139853452924736:error:2506C06A:DSO support
routines:DSO_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_lib.c:185:
>
139853452924736:error:260B6068:engine
routines:dynamic_load:DSO
failure:crypto/engine/eng_dyn.c:427:
>
139853452924736:error:2606A074:engine
routines:ENGINE_by_id:no such
engine:crypto/engine/eng_list.c:339:id=afalg
> 139853452924736:error:25066067:DS
>
>
> nm afalg.so doesn't show
bind_engine
>
Assuming
you have already successfully built OpenSSL using
"make", from
the "test"
subdir of the directory where you downloaded the source,
what
happens if you execute:
OPENSSL_ENGINES=../engines/afalg
../util/shlib_wrap.sh ./afalgtest
Another thing to try is (from the top level
source dir)
touch
engines/afalg/e_afalg.c
make
Check to see if there are any
warnings generated during the compilation
of
the engine.
>
> When I modify the openssl.cnf file with
the engine name and the CIPHERS, still I dont get it
working. The command output and the change in the
openssl.cnf pasted at the end of the mail.
>
>
> TWO: I had to create a softlink to
libcrypto.so.1.1 and libssl.so.1.1 like the following to
make openssl command work:
> ln -s
/usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
> ln -s /usr/local/lib64/libcrypto.so.1.1
/lib64/libcrypto.so.1.1
>
> Is creating the softlinks a known issue
and will be fixed?
No, this will not be
fixed and may not be the most appropriate thing to
do on all systems.
Matt
>
> I have pasted the
complete information about the OS/distro environment and
installation commands I ran at the bottom.
> Could you please suggest what wrong I am
doing to make afalg work.
>
> Thanks
> Jitendra
Lulla
>
> ========
>
>
> BEFORE INSTALLATION:
>
> [root@localhost
jlulla]# rpm -qa |grep openssl
>
openssl-1.0.1e-60.el7.x86_64
>
openssl-devel-1.0.1e-60.el7.x86_64
>
openssl-libs-1.0.1e-60.el7.x86_64
>
> [root@localhost
jlulla]# openssl version
> OpenSSL
1.0.1e-fips 11 Feb 2013
>
>
>
> PLEASE SEE FROM HERE PLEASE SEE FROM HERE
PLEASE SEE FROM HERE----------------------------
>
> STEP 1 : SOURCE
TAKEN FROM https://www.openssl.org/source/openssl-1.1.0f.tar.gz
2017-May-25 13:09:51
>
> [root@localhost
jlulla]# uname -a
> Linux
localhost.localdomain 4.9.37 #1 SMP Fri Jul 21 04:52:46 PDT
2017 x86_64 x86_64 x86_64 GNU/Linux
>
> [root@localhost
jlulla]# cat /etc/redhat-release
> Red
Hat Enterprise Linux Server release 7.3 (Maipo)
>
>
>
> [root@localhost
openssl-1.1.0f]# pwd
>
/home/jlulla/openssl-1.1.0f
>
> STEP 2: [root@localhost
openssl-1.1.0f]# ./config shared enable-engine enable-dso
enable-afalgeng
> Operating system:
x86_64-whatever-linux2
> Configuring for
linux-x86_64
> Configuring OpenSSL
version 1.1.0f (0x1010006fL)
>
no-asan [default] OPENSSL_NO_ASAN
> no-crypto-mdebug [default]
OPENSSL_NO_CRYPTO_MDEBUG
>
no-crypto-mdebug-backtrace [default]
OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
>
no-ec_nistp_64_gcc_128 [default]
OPENSSL_NO_EC_NISTP_64_GCC_128
>
no-egd [default] OPENSSL_NO_EGD
> no-fuzz-afl [default]
OPENSSL_NO_FUZZ_AFL
>
no-fuzz-libfuzzer [default] OPENSSL_NO_FUZZ_LIBFUZZER
> no-heartbeats [default]
OPENSSL_NO_HEARTBEATS
> no-md2
[default] OPENSSL_NO_MD2 (skip dir)
> no-msan [default]
OPENSSL_NO_MSAN
> no-rc5
[default] OPENSSL_NO_RC5 (skip dir)
> no-sctp [default]
OPENSSL_NO_SCTP
> no-ssl-trace
[default] OPENSSL_NO_SSL_TRACE
>
no-ssl3 [default] OPENSSL_NO_SSL3
> no-ssl3-method [default]
OPENSSL_NO_SSL3_METHOD
> no-ubsan
[default] OPENSSL_NO_UBSAN
>
no-unit-test [default] OPENSSL_NO_UNIT_TEST
> no-weak-ssl-ciphers [default]
OPENSSL_NO_WEAK_SSL_CIPHERS
>
no-zlib [default]
>
no-zlib-dynamic [default]
> Configuring
for linux-x86_64
> CC
=gcc
> CFLAG =-Wall -O3
-pthread -m64 -DL_ENDIAN -Wa,--noexecstack
> SHARED_CFLAG =-fPIC
-DOPENSSL_USE_NODELETE
> DEFINES
=DSO_DLFCN HAVE_DLFCN_H NDEBUG OPENSSL_THREADS
OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_IA32_SSE2
OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m
SHA1_ASM SHA256_ASM SHA512_ASM RC4_ASM MD5_ASM AES_ASM
VPAES_ASM BSAES_ASM GHASH_ASM ECP_NISTZ256_ASM PADLOCK_ASM
POLY1305_ASM
> LFLAG =
> PLIB_LFLAG =
>
EX_LIBS =-ldl
> APPS_OBJ
=
> CPUID_OBJ =x86_64cpuid.o
> UPLINK_OBJ =
>
BN_ASM =asm/x86_64-gcc.o x86_64-mont.o
x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o
rsaz-avx2.o
> EC_ASM
=ecp_nistz256.o ecp_nistz256-x86_64.o
>
DES_ENC =des_enc.o fcrypt_b.o
>
AES_ENC =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o
aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o
aesni-mb-x86_64.o
> BF_ENC
=bf_enc.o
> CAST_ENC =c_enc.o
> RC4_ENC =rc4-x86_64.o
rc4-md5-x86_64.o
> RC5_ENC
=rc5_enc.o
> MD5_OBJ_ASM
=md5-x86_64.o
> SHA1_OBJ_ASM
=sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
sha1-mb-x86_64.o sha256-mb-x86_64.o
>
RMD160_OBJ_ASM=
> CMLL_ENC
=cmll-x86_64.o cmll_misc.o
> MODES_OBJ
=ghash-x86_64.o aesni-gcm-x86_64.o
>
PADLOCK_OBJ =e_padlock-x86_64.o
>
CHACHA_ENC =chacha-x86_64.o
>
POLY1305_OBJ =poly1305-x86_64.o
>
BLAKE2_OBJ =
> PROCESSOR =
> RANLIB =ranlib
> ARFLAGS =
>
PERL =/usr/bin/perl
>
> SIXTY_FOUR_BIT_LONG mode
>
> Configured for
linux-x86_64.
> [root@localhost
openssl-1.1.0f]#
>
>
make didnt give any error.
>
> make install didnt give any error
>
> updatedb
>
> STEP 2:
> [root@localhost
openssl-1.1.0f]# md5sum
/home/jlulla/openssl-1.1.0f/libssl.so.1.1
/usr/local/lib64/libssl.so.1.1
>
5a7264a3ebda22989c831794d30677c5
/home/jlulla/openssl-1.1.0f/libssl.so.1.1
> 5a7264a3ebda22989c831794d30677c5
/usr/local/lib64/libssl.so.1.1
>
> [root@localhost
openssl-1.1.0f]# ls -l
/home/jlulla/openssl-1.1.0f/libssl.so
>
lrwxrwxrwx. 1 root root 13 Aug 10 23:45
/home/jlulla/openssl-1.1.0f/libssl.so -> libssl.so.1.1
>
>
> [root@localhost
apps]# pwd
>
/home/jlulla/openssl-1.1.0f/apps
> [root@localhost
apps]# ./openssl
> ./openssl: error while
loading shared libraries: libssl.so.1.1: cannot open shared
object file: No such file or directory
>
> [root@localhost
apps]# ldd ./openssl
>
linux-vdso.so.1 => (0x00007ffd02f3c000)
> libssl.so.1.1 => not
found
> libcrypto.so.1.1
=> not found
> libdl.so.2
=> /lib64/libdl.so.2 (0x00007f0439fda000)
> libpthread.so.0 =>
/lib64/libpthread.so.0 (0x00007f0439dbe000)
> libc.so.6 =>
/lib64/libc.so.6 (0x00007f04399fc000)
>
/lib64/ld-linux-x86-64.so.2
(0x000055d618530000)
>
>
> [root@localhost
apps]# ls -l /lib64/libssl.so.1.1
> ls:
cannot access /lib64/libssl.so.1.1: No such file or
directory
>
> ln -s
/usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
>
> STEP 3:
> [root@localhost
apps]# ln -s /usr/local/lib64/libssl.so.1.1
/lib64/libssl.so.1.1
> [root@localhost
apps]# ls -l /lib64/libssl.so.1.1
>
lrwxrwxrwx. 1 root root 30 Aug 10 23:57 /lib64/libssl.so.1.1
-> /usr/local/lib64/libssl.so.1.1
>
>
> [root@localhost
apps]# ln -s /usr/local/lib64/libcrypto.so.1.1
/lib64/libcrypto.so.1.1
> [root@localhost
apps]# ls -l /lib64/libcrypto.so.1.1
>
lrwxrwxrwx. 1 root root 33 Aug 10 23:58
/lib64/libcrypto.so.1.1 ->
/usr/local/lib64/libcrypto.so.1.1
>
> [root@localhost
apps]# ldd ./openssl
>
linux-vdso.so.1 => (0x00007ffd37b5e000)
> libssl.so.1.1 =>
/lib64/libssl.so.1.1 (0x00007f82881f8000)
> libcrypto.so.1.1 =>
/lib64/libcrypto.so.1.1 (0x00007f8287d73000)
> libdl.so.2 =>
/lib64/libdl.so.2 (0x00007f8287b6e000)
> libpthread.so.0 =>
/lib64/libpthread.so.0 (0x00007f8287952000)
> libc.so.6 =>
/lib64/libc.so.6 (0x00007f8287591000)
>
/lib64/ld-linux-x86-64.so.2
(0x000055f06bc67000)
>
>
> [root@localhost
apps]# ./openssl version
> OpenSSL
1.1.0f 25 May 2017
>
>
> STEP 4:
> [root@localhost
afalg]# pwd
>
/home/jlulla/openssl-1.1.0f/engines/afalg
>
> [root@localhost
afalg]# ls
> afalg.so build.info
e_afalg.c e_afalg.d e_afalg.ec e_afalg_err.c
e_afalg_err.d e_afalg_err.h e_afalg_err.o e_afalg.h
e_afalg.o
>
> [root@localhost
afalg]# ldd afalg.so
>
linux-vdso.so.1 => (0x00007fff1d7ef000)
> libcrypto.so.1.1 =>
/lib64/libcrypto.so.1.1 (0x00007f3a80166000)
> libdl.so.2 =>
/lib64/libdl.so.2 (0x00007f3a7ff62000)
> libpthread.so.0 =>
/lib64/libpthread.so.0 (0x00007f3a7fd45000)
> libc.so.6 =>
/lib64/libc.so.6 (0x00007f3a7f984000)
>
/lib64/ld-linux-x86-64.so.2
(0x0000560991976000)
>
>
> [root@localhost
afalg]# nm afalg.so
> 0000000000202060 d
AFALG_error_init
> 0000000000202220 b
AFALG_lib_error_code
> 0000000000202160 d
AFALG_str_functs
> 0000000000202080 d
AFALG_str_reasons
> 0000000000202210 B
__bss_start
> 0000000000202210 b
completed.6344
>
w __cxa_finalize@@GLIBC_2.2.5
>
0000000000000a00 t deregister_tm_clones
>
0000000000000a70 t __do_global_dtors_aux
> 0000000000201da0 t
__do_global_dtors_aux_fini_array_entry
>
0000000000201db0 d __dso_handle
>
0000000000201db8 d _DYNAMIC
>
0000000000202210 D _edata
>
0000000000202228 B _end
>
0000000000000af0 T engine_load_afalg_int
> 0000000000000bb0 T ERR_AFALG_error
> U
ERR_get_next_error_library@@OPENSSL_1_1_0
> 0000000000000b00 T
ERR_load_AFALG_strings
>
U ERR_load_strings@@OPENSSL_1_1_0
> U
ERR_put_error@@OPENSSL_1_1_0
>
0000000000000b60 T ERR_unload_AFALG_strings
> U
ERR_unload_strings@@OPENSSL_1_1_0
>
0000000000000bf8 T _fini
>
0000000000000ab0 t frame_dummy
>
0000000000201d98 t __frame_dummy_init_array_entry
> 0000000000000eb8 r __FRAME_END__
> 0000000000202000 d
_GLOBAL_OFFSET_TABLE_
>
w __gmon_start__
>
0000000000000970 T _init
>
w _ITM_deregisterTMCloneTable
> w
_ITM_registerTMCloneTable
>
0000000000201da8 d __JCR_END__
>
0000000000201da8 d __JCR_LIST__
>
w _Jv_RegisterClasses
>
0000000000000a30 t register_tm_clones
>
0000000000202210 d __TMC_END__
>
>
> [root@localhost
openssl-1.1.0f]# locate afalg.so
>
/home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
> /usr/local/lib64/engines-1.1/afalg.so
>
>
> [root@localhost
openssl-1.1.0f]# md5sum
/home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
/usr/local/lib64/engines-1.1/afalg.so
>
ec273faa6eb6e25f55e44a7d37adf195
/home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
> ec273faa6eb6e25f55e44a7d37adf195
/usr/local/lib64/engines-1.1/afalg.so
>
>
> [root@localhost
apps]# date
> Fri Aug 11 00:01:10 PDT
2017
>
>
> [root@localhost
apps]# ls -l /usr/local/ssl/openssl.cnf
>
-rw-r--r--. 1 root root 10771 Aug 10 23:47
/usr/local/ssl/openssl.cnf
>
> [root@localhost
apps]# md5sum /usr/local/ssl/openssl.cnf
/home/jlulla/openssl-1.1.0f/apps/openssl.cnf
> f697ef5df0d006882e6326606e8dbf4a
/usr/local/ssl/openssl.cnf
>
f697ef5df0d006882e6326606e8dbf4a
/home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>
>
> openssl.cnf has the following:
> ..
> ..
> # Extra OBJECT IDENTIFIER info:
> #oid_file =
$ENV::HOME/.oid
> oid_section
= new_oids
>
>
# To use this configuration file with the
"-extfile" option of the
> #
"openssl x509" utility, name here the section
containing the
> # X.509v3 extensions to
use:
> # extensions =
> # (Alternatively, use a configuration file
that has only
> # X.509v3 extensions in
its main [= default] section.)
>
> ..
> ..
>
> [root@localhost
apps]# ./openssl speed -evp aes-128-cbc -engine afalg
> invalid engine "afalg"
> 139853452924736:error:2506406A:DSO support
routines:dlfcn_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
/usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
bind_engine
>
139853452924736:error:2506C06A:DSO support
routines:DSO_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_lib.c:185:
>
139853452924736:error:260B6068:engine
routines:dynamic_load:DSO
failure:crypto/engine/eng_dyn.c:427:
>
139853452924736:error:2606A074:engine
routines:ENGINE_by_id:no such
engine:crypto/engine/eng_list.c:339:id=afalg
> 139853452924736:error:25066067:DSO support
routines:dlfcn_load:could not load the shared
library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
libafalg.so: cannot open shared object file: No such file or
directory
>
139853452924736:error:25070067:DSO support
routines:DSO_load:could not load the shared
library:crypto/dso/dso_lib.c:161:
>
139853452924736:error:260B6084:engine
routines:dynamic_load:dso not
found:crypto/engine/eng_dyn.c:414:
>
^C
>
>
> Modified both the files as the
follwing:
> /usr/local/ssl/openssl.cnf
>
/home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>
> # Extra OBJECT
IDENTIFIER info:
> #oid_file
= $ENV::HOME/.oid
>
oid_section = new_oids
>
> openssl_conf = openssl_def
>
> [openssl_def]
> engines = openssl_engines
>
> [openssl_engines]
> afalg = afalg_engine
>
> [afalg_engine]
>
CIPHERS=aes-128-cbc
>
> With the above, the errors are more:
> [root@localhost
apps]# ./openssl speed -evp aes-128-cbc -engine afalg
> invalid engine "afalg"
> 140473780422464:error:2506406A:DSO support
routines:dlfcn_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
/usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
bind_engine
>
140473780422464:error:2506C06A:DSO support
routines:DSO_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_lib.c:185:
>
140473780422464:error:260B6068:engine
routines:dynamic_load:DSO
failure:crypto/engine/eng_dyn.c:427:
>
140473780422464:error:2606A074:engine
routines:ENGINE_by_id:no such
engine:crypto/engine/eng_list.c:339:id=afalg
> 140473780422464:error:260BC066:engine
routines:int_engine_configure:engine configuration
error:crypto/engine/eng_cnf.c:141:section=afalg_engine,
name=CIPHERS, value=aes-128-cbc
>
140473780422464:error:0E07606D:configuration file
routines:module_run:module initialization
error:crypto/conf/conf_mod.c:173:module=engines,
value=openssl_engines, retcode=-1
>
140473780422464:error:2506406A:DSO support
routines:dlfcn_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
/usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
bind_engine
>
140473780422464:error:2506C06A:DSO support
routines:DSO_bind_func:could not bind to the requested
symbol name:crypto/dso/dso_lib.c:185:
>
140473780422464:error:260B6068:engine
routines:dynamic_load:DSO
failure:crypto/engine/eng_dyn.c:427:
>
140473780422464:error:2606A074:engine
routines:ENGINE_by_id:no such
engine:crypto/engine/eng_list.c:339:id=afalg
> 140473780422464:error:25066067:DSO support
routines:dlfcn_load:could not load the shared
library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
libafalg.so: cannot open shared object file: No such file or
directory
>
140473780422464:error:25070067:DSO support
routines:DSO_load:could not load the shared
library:crypto/dso/dso_lib.c:161:
>
140473780422464:error:260B6084:engine
routines:dynamic_load:dso not
found:crypto/engine/eng_dyn.c:414:
>
^C
>
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev