Re: damaged partition
Markus Feldmann <[email protected]> Sun, 18 Sep 2011 00:21:55 +0200
| Newsgroups | gmane.comp.file-systems.ext3.user |
|---|---|
| Message-ID | <[email protected]> |
Am 16.09.2011 23:22, schrieb Stephen Samuel: > You're working with a damaged partition.. Probably the first thing to do > would be to make a copy of the partition. > Get either a 16GB thumb drive, or an external drive that you can > partition appropriately.. then make a copy of the damaged partition -- > This may be a trial-and-error situation. > > Once you have a good copy, then you can work on the copy. > > If you get a laptop drive, then you can make multiple copies of the bad > partition(s) overnight and then try different recovery paths until you > get what you need. > > If you only care about parts of the data, on the drive you can also try > mounting readonly -- and see if the data you want is available for > copying out without having to repair the entire partition. > > mount -o ro /dev/sda7 /mnt/sda7 Hi, i bought an external 1GB Harddisk and saved this damaged partition. Furhter on i tried: <e2fsck -f /mnt/AIRY-1TB/sda7.part> http://pastebin.com/f1TRMNS2 The output is in german, sorry. However i dont know when i should to press "yes", so i only pressed "y". Then i started <testdisk /mnt/AIRY-1TB/sda7.part> and he found ".", ".." and i copied "." to some place on my external disk. I could recover my .thunderbird :-) regards Markus