Timeout and TLS handshake
Sam Hutchings <[email protected]>
| Newsgroups | gmane.comp.freeradius.user |
|---|---|
| Message-ID | <CABAo4zmj45Ha9KP19+TGBXs52OdZOgZXPrxCKQYUK7XvpCezTg@mail.gmail.com> |
Hi,
Please can you advise why the connection is not succeeding?
The Problem:
A Windows client is not succeeding authentication and the debug does
not show that the TLS handshake completes over WAN; the server is
hosted in Azure Container Instance. I have tested the same container
locally on the LAN which is working OK (docker container running on a
VM with a separate laptop with 802.1x configured with a switch set as
the NAC).
I can see the TLS handshake when comparing to a working example seems
to be missing the below:
(6) &session-state:TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
(6) &session-state:TLS-Session-Version = "TLS 1.3"
(6) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
What you are trying to do: Authenticate a Windows client via 802.1X
with EAP-TLS over the internet to an Azure Container Instance running
freeRADIUS.
This is behind a load balancer with a public IP, which includes a
health check on port 8080. This works when using eapol_test but not
when using Windows authentication. Although, this works for both
Windows and eapol_test when running the container on the local
network.
why you are trying to do it: Understand why this fails the TLS
handshake over the internet.
what you expect the server to do: TLS handshake to complete and
authentication request to receive an Access-Accept
what the server does instead (i.e. debug output):
FreeRADIUS Version 3.2.7
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/totp
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/utf8
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/rfc7542
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/check-eap-tls
including configuration file /etc/freeradius/sites-enabled/status
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "@prefix@"
localstatedir = "@localstatedir@"
logdir = "@logdir@"
run_dir = "@localstatedir@/run/radiusd"
}
main {
name = "radiusd"
prefix = "@prefix@"
localstatedir = "@localstatedir@"
sbindir = "@sbindir@"
logdir = "@logdir@"
run_dir = "@localstatedir@/run/radiusd"
libdir = "@libdir@"
radacctdir = "@radacctdir@"
hostname_lookups = no
max_request_time = 30
proxy_dedup_window = 1
cleanup_delay = 30
max_requests = 16384
max_fds = 512
postauth_client_lost = no
pidfile = "@localstatedir@/run/radiusd/radiusd.pid"
checkrad = "@sbindir@/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
require_message_authenticator = "auto"
limit_proxy_state = "auto"
}
unlang {
group_stop_return = no
policy_stop_return = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
nonblock = no
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = "auto"
limit_proxy_state = "auto"
secret = <<< secret >>>
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Shared secret for client localhost is short, and likely can be broken
by an attacker.
client localhost_ipv6 {
ipv6addr = ::1
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Shared secret for client localhost_ipv6 is short, and likely can be
broken by an attacker.
client radiustesting {
ipaddr = 185.241.224.187
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debug state unknown (cap_sys_ptrace capability not set)
Configuration version: 7161-5ad1-6c77-638f
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Autz-Type = New-TLS-Connection
# Creating Autz-Type = Status-Server
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/freeradius/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/freeradius/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
max_eap_type = 52
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
dedup_key = "%{Calling-Station-Id}"
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "@logdir@/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "@logdir@/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_proxy_rate_limit
# Loading module "proxy_rate_limit" from file
/etc/freeradius/mods-enabled/proxy_rate_limit
proxy_rate_limit {
max_entries = 2048
idle_timeout = 10
num_subtables = 256
window = 1
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "@logdir@/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "@logdir@/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_totp
# Loading module "totp" from file /etc/freeradius/mods-enabled/totp
totp {
time_step = 30
otp_length = 6
lookback_steps = 1
lookback_interval = 30
lookforward_steps = 0
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "@logdir@/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
instantiate {
}
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
# Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
/etc/freeradius/mods-enabled/eap[56]: Found dynamic expansion in
string which will not be dynamically expanded
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
virtual_server = "check-eap-tls"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.pem"
certificate_file = "/etc/freeradius/certs/server.pem"
ca_file = "/etc/freeradius/certs/ca.pem"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.3"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
# Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "proxy_rate_limit" from file
/etc/freeradius/mods-enabled/proxy_rate_limit
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server default { # from file /etc/freeradius/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server check-eap-tls { # from file /etc/freeradius/sites-enabled/check-eap-tls
# Loading authorize {...}
} # server check-eap-tls
server status { # from file /etc/freeradius/sites-enabled/status
# Loading authorize {...}
Compiling Autz-Type Status-Server for attr Autz-Type
} # server status
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 128
lifetime = 30
idle_timeout = 60
}
Setting idle_timeout to 0
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "status"
ipaddr = *
port = 8080
proto = "tcp"
limit {
max_connections = 64
lifetime = 15
idle_timeout = 30
}
Setting idle_timeout to 0
clients = "azure_lb"
client azure_lb {
ipaddr = 168.63.129.16
secret = <<< secret >>>
proto = "tcp"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on status proto tcp address * port 8080 bound to server status
Listening on proxy address * port 47097
Listening on proxy address :: port 33982
Ready to process requests
... new connection request on TCP socket
Listening on status from client (168.63.129.16, 54790) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 54790) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 54858) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 54858) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 54946) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 54946) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55023) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55023) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55116) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55116) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55188) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55188) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55271) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55271) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55341) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55341) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55411) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55411) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55486) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55486) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55575) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55575) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55631) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55631) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55721) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55721) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55790) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55790) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55987) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 55987) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 56081) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
... shutting down socket status from client (168.63.129.16, 56081) ->
(*, 8080, virtual-server=status)
Ready to process requests
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
(0) Received Access-Request Id 225 from 185.241.224.187:35356 to
10.0.0.5:1812 length 195
(0) NAS-IP-Address = 192.168.1.112
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 4
(0) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(0) Acct-Session-Id = "0500003F"
(0) Called-Station-Id = "A4-B2-39-CD-FE-3F"
(0) Calling-Station-Id = "28-00-AF-0F-A8-32"
(0) EAP-Message =
0x0201002e01686f73742f33353365633031342d356337302d346534632d613763382d623963386235383630333532
(0) Message-Authenticator = 0xfd9f875e95feb822675be4ee23747c02
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 46
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) authenticate {
(0) eap: EXPAND %{Calling-Station-Id}
(0) eap: --> 28-00-AF-0F-A8-32
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Using default_eap_type = TLS
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: (TLS) TLS -Initiating new session
(0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client
(0) eap: Sending EAP Request (code 1) ID 2 length 6
(0) eap: EAP session adding &reply:State = 0xa960c76da962ca67
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0) Framed-MTU = 994
(0) Sent Access-Challenge Id 225 from 10.0.0.5:1812 to
185.241.224.187:35356 length 64
(0) EAP-Message = 0x010200060d20
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xa960c76da962ca67c033c547c41b2362
(0) Finished request
Waking up in 29.9 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 25.3 seconds.
(1) Received Access-Request Id 226 from 185.241.224.187:35356 to
10.0.0.5:1812 length 436
(1) NAS-IP-Address = 192.168.1.112
(1) NAS-Port-Type = Ethernet
(1) NAS-Port = 4
(1) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(1) Acct-Session-Id = "0500003F"
(1) State = 0xa960c76da962ca67c033c547c41b2362
(1) Called-Station-Id = "A4-B2-39-CD-FE-3F"
(1) Calling-Station-Id = "28-00-AF-0F-A8-32"
(1) EAP-Message =
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
(1) Message-Authenticator = 0xcc559b3212a95756ea6a742fc1963909
(1) Restoring &session-state
(1) &session-state:Framed-MTU = 994
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 267
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) [expiration] = noop
(1) [logintime] = noop
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) authenticate {
(1) eap: Removing EAP session with state 0xa960c76da962ca67
(1) eap: Previous EAP request found for state 0xa960c76da962ca67,
released from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: (TLS) EAP Peer says that the final record size will be 257 bytes
(1) eap_tls: (TLS) EAP Got all data (257 bytes)
(1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client hello
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server hello
(1) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
change cipher spec
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
(1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write
encrypted extensions
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
(1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
certificate verify
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
(1) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early data
(1) eap_tls: (TLS) TLS - In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 3 length 1000
(1) eap: EAP session adding &reply:State = 0xa960c76da863ca67
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1) Framed-MTU = 994
(1) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(1) Sent Access-Challenge Id 226 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(1) EAP-Message =
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
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xa960c76da863ca67c033c547c41b2362
(1) Finished request
Waking up in 20.9 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 20.3 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 15.3 seconds.
(2) Received Access-Request Id 227 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(2) NAS-IP-Address = 192.168.1.112
(2) NAS-Port-Type = Ethernet
(2) NAS-Port = 4
(2) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(2) Acct-Session-Id = "0500003F"
(2) State = 0xa960c76da863ca67c033c547c41b2362
(2) Called-Station-Id = "A4-B2-39-CD-FE-3F"
(2) Calling-Station-Id = "28-00-AF-0F-A8-32"
(2) EAP-Message = 0x020300060d00
(2) Message-Authenticator = 0xbf0af695bb5ac349944293a07a61472c
(2) Restoring &session-state
(2) &session-state:Framed-MTU = 994
(2) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2) [eap] = updated
(2) [files] = noop
(2) [expiration] = noop
(2) [logintime] = noop
(2) [pap] = noop
(2) } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) authenticate {
(2) eap: Removing EAP session with state 0xa960c76da863ca67
(2) eap: Previous EAP request found for state 0xa960c76da863ca67,
released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 4 length 1000
(2) eap: EAP session adding &reply:State = 0xa960c76dab64ca67
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2) Framed-MTU = 994
(2) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(2) Sent Access-Challenge Id 227 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(2) EAP-Message =
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
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xa960c76dab64ca67c033c547c41b2362
(2) Finished request
Waking up in 11.8 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 10.3 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 5.3 seconds.
(3) Received Access-Request Id 228 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(3) NAS-IP-Address = 192.168.1.112
(3) NAS-Port-Type = Ethernet
(3) NAS-Port = 4
(3) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(3) Acct-Session-Id = "0500003F"
(3) State = 0xa960c76dab64ca67c033c547c41b2362
(3) Called-Station-Id = "A4-B2-39-CD-FE-3F"
(3) Calling-Station-Id = "28-00-AF-0F-A8-32"
(3) EAP-Message = 0x020400060d00
(3) Message-Authenticator = 0x038ead73ce4c8b0a455b6b5ffea2c726
(3) Restoring &session-state
(3) &session-state:Framed-MTU = 994
(3) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3) [eap] = updated
(3) [files] = noop
(3) [expiration] = noop
(3) [logintime] = noop
(3) [pap] = noop
(3) } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) authenticate {
(3) eap: Removing EAP session with state 0xa960c76dab64ca67
(3) eap: Previous EAP request found for state 0xa960c76dab64ca67,
released from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 5 length 1000
(3) eap: EAP session adding &reply:State = 0xa960c76daa65ca67
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3) Framed-MTU = 994
(3) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(3) Sent Access-Challenge Id 228 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(3) EAP-Message =
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
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xa960c76daa65ca67c033c547c41b2362
(3) Finished request
Waking up in 2.8 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 0.2 seconds.
(0) Cleaning up request packet ID 225 with timestamp +1392 due to
cleanup_delay was reached
Waking up in 9.0 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 4.3 seconds.
(4) Received Access-Request Id 229 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(4) NAS-IP-Address = 192.168.1.112
(4) NAS-Port-Type = Ethernet
(4) NAS-Port = 4
(4) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(4) Acct-Session-Id = "0500003F"
(4) State = 0xa960c76daa65ca67c033c547c41b2362
(4) Called-Station-Id = "A4-B2-39-CD-FE-3F"
(4) Calling-Station-Id = "28-00-AF-0F-A8-32"
(4) EAP-Message = 0x020500060d00
(4) Message-Authenticator = 0xd41b050c3a3def192db05fd631f14607
(4) Restoring &session-state
(4) &session-state:Framed-MTU = 994
(4) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: No EAP Start, assuming it's an on-going EAP conversation
(4) [eap] = updated
(4) [files] = noop
(4) [expiration] = noop
(4) [logintime] = noop
(4) [pap] = noop
(4) } # authorize = updated
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) authenticate {
(4) eap: Removing EAP session with state 0xa960c76daa65ca67
(4) eap: Previous EAP request found for state 0xa960c76daa65ca67,
released from the list
(4) eap: Peer sent packet with method EAP TLS (13)
(4) eap: Calling submodule eap_tls to process data
(4) eap_tls: (TLS) Peer ACKed our handshake fragment
(4) eap: Sending EAP Request (code 1) ID 6 length 1000
(4) eap: EAP session adding &reply:State = 0xa960c76dad66ca67
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4) Framed-MTU = 994
(4) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(4) Sent Access-Challenge Id 229 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(4) EAP-Message =
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
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xa960c76dad66ca67c033c547c41b2362
(4) Finished request
Waking up in 2.8 seconds.
(1) Cleaning up request packet ID 226 with timestamp +1401 due to
cleanup_delay was reached
Waking up in 9.0 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 8.3 seconds.
... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 3.3 seconds.
(5) Received Access-Request Id 230 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(5) NAS-IP-Address = 192.168.1.112
(5) NAS-Port-Type = Ethernet
(5) NAS-Port = 4
(5) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(5) Acct-Session-Id = "0500003F"
(5) State = 0xa960c76dad66ca67c033c547c41b2362
(5) Called-Station-Id = "A4-B2-39-CD-FE-3F"
(5) Calling-Station-Id = "28-00-AF-0F-A8-32"
(5) EAP-Message = 0x020600060d00
(5) Message-Authenticator = 0x0dc4ca0033f30b31ea12f0a84c3615c3
(5) Restoring &session-state
(5) &session-state:Framed-MTU = 994
(5) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5) [eap] = updated
(5) [files] = noop
(5) [expiration] = noop
(5) [logintime] = noop
(5) [pap] = noop
(5) } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) authenticate {
(5) eap: Removing EAP session with state 0xa960c76dad66ca67
(5) eap: Previous EAP request found for state 0xa960c76dad66ca67,
released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: (TLS) Peer ACKed our handshake fragment
(5) eap: Sending EAP Request (code 1) ID 7 length 109
(5) eap: EAP session adding &reply:State = 0xa960c76dac67ca67
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5) Framed-MTU = 994
(5) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(5) Sent Access-Challenge Id 230 from 10.0.0.5:1812 to
185.241.224.187:35356 length 167
(5) EAP-Message =
0x0107006d0d8000000fdbe33d32c6d71228255ebeafdd018899878a8fe0a80f886c4eb5170303004513e76f1ad52ae44957d10ac939c3d9a463013e536725fa716af274ae1ca18448ac2820e8abb26835729ebf1a1e0cca06c6553bba22f0249caa9e90802e54b60b89891323cb
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xa960c76dac67ca67c033c547c41b2362
(5) Finished request
Waking up in 2.9 seconds.
(2) Cleaning up request packet ID 227 with timestamp +1410 due to
cleanup_delay was reached
Ready to process requests
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html