Re: query on hostapd

Thank you Dave. Yes with regular port I can see radius packets at the the
radius sever and between the client and hostapd I see EAPOL packets.

Can you suggest what value needs to write in the fwd_mask for this to work
for bridge interface ?

Regards
Simon

On Tuesday, April 22, 2025, Dave Funk <[email protected]> wrote:

> On Mon, 21 Apr 2025, SIMON BABY wrote:
>
> Hello Team,
>>
>> Do we have to enable anything in the bridge interface in Linux for
>> processing EAPOL packets ? Currently the bridge in my setup cannot
>> detect EAPOL packets.  However the DSA lan ports are able to detect.
>> The bridge interface contains the lan ports.
>>
>> Regards
>> Simon
>>
>
> Technically you should not see any EAPOL packets at your radius server.
>
> You should see the rad-request/rad-account UDP 1812 & 1813 (and possibly
> tcp 1812 & 1813) packets at your radius server so you will need to be sure
> those packets make it in thru what ever network config is implemented on
> the system hosting your radius server.
>
> EAPOL is the network protocol that your WPA supplicants (wireless devices
> & laptops) use to communicate to your wireless access-points and they use
> UDP 1812/1813 to send the request to your radius server.
>
>
> --
> Dave Funk                               University of Iowa
> <dbfunk (at) engineering.uiowa.edu>     College of Engineering
> 319/335-5751   FAX: 319/384-0549        1256 Seamans Center, 10
> <https://www.google.com/maps/search/amans+Center,+10?entry=gmail&source=g>3
> S Capitol St.
> Sys_admin/Postmaster/cell_admin         Iowa City, IA 52242-1527
> #include <std_disclaimer.h>
> Better is not better, 'standard' is better. B{
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list
> /users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html