Re: Help request: WPA Enterprise Authentication with UniFi equipment and Google Workspace LDAPS
rafa alfurqan <[email protected]>
| Newsgroups | gmane.comp.freeradius.user |
|---|---|
| Message-ID | <CAPBstgMizFRtC=Upo+bF2-xv93dDJZH8KqHfxAW4ZyP4t+Q8jw@mail.gmail.com> |
5 vu c2 On Wed, Jul 9, 2025, 00:52 Taylor Gorman <[email protected]> wrote: > Hello there. I would like to request assistance. > > Supplicant device: 2017 inch MacBook Air running macOS Monterey 12.7.6 > > Network equipment: UAP-AC-PRO wireless access point and UDM-SE router > > Directory server: Google Workspace LDAPS > > My Implementation: Using official docker imagine > "freeradius/freeradius-server" running on Google Compute Engine COS. > > What am I trying to do: WPA Enterprise Authentication (EAP-TTLS-PAP) > > Why am I trying to do it: To eliminate the security risk of pre-shared > keys in a professional setting > > What I expect the server to do: Continue past authenticate and on to > authorize. > > What the server does: Completes authenticate and fails on authorize > > Remarks: I am a novice, but by my understanding, freeRADIUS is > completing the authentication portion. This means that freeRADIUS > connects to LDAPS and verifies the supplicant's username and password. > So if all of this works, then why is freeRADIUS unable to proceed to > authenticate? I suspect that there is some error with passing the > supplicant user's password from the authenticate section to the > authorize section. > > I apologize for not truncating the debug output. I am not sure which > parts are relevant and which parts are not. > > Thank you for your assistance, > > Taylor Gorman > > FreeRADIUS Version 3.2.7 > Copyright (C) 1999-2023 The FreeRADIUS server project and contributors > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License > For more information about these matters, see the file named COPYRIGHT > Starting - reading configuration files ... > including dictionary file /usr/share/freeradius/dictionary > including dictionary file /usr/share/freeradius/dictionary.dhcp > including dictionary file /usr/share/freeradius/dictionary.vqp > including dictionary file /etc/freeradius/dictionary > including configuration file /etc/freeradius/radiusd.conf > including configuration file /etc/freeradius/proxy.conf > including configuration file /etc/freeradius/clients.conf > including files in directory /etc/freeradius/mods-enabled/ > including configuration file /etc/freeradius/mods-enabled/utf8 > including configuration file /etc/freeradius/mods-enabled/totp > including configuration file /etc/freeradius/mods-enabled/date > including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit > including configuration file /etc/freeradius/mods-enabled/mschap > including configuration file /etc/freeradius/mods-enabled/cache_auth > including configuration file /etc/freeradius/mods-enabled/attr_filter > including configuration file /etc/freeradius/mods-enabled/detail.log > including configuration file /etc/freeradius/mods-enabled/ntlm_auth > including configuration file /etc/freeradius/mods-enabled/expiration > including configuration file /etc/freeradius/mods-enabled/unix > including configuration file /etc/freeradius/mods-enabled/echo > including configuration file /etc/freeradius/mods-enabled/digest > including configuration file /etc/freeradius/mods-enabled/files > including configuration file /etc/freeradius/mods-enabled/linelog > including configuration file /etc/freeradius/mods-enabled/dynamic_clients > including configuration file /etc/freeradius/mods-enabled/preprocess > including configuration file /etc/freeradius/mods-enabled/passwd > including configuration file /etc/freeradius/mods-enabled/chap > including configuration file /etc/freeradius/mods-enabled/unpack > including configuration file /etc/freeradius/mods-enabled/eap > including configuration file /etc/freeradius/mods-enabled/replicate > including configuration file /etc/freeradius/mods-enabled/logintime > including configuration file /etc/freeradius/mods-enabled/soh > including configuration file /etc/freeradius/mods-enabled/radutmp > including configuration file /etc/freeradius/mods-enabled/pap > including configuration file /etc/freeradius/mods-enabled/detail > including configuration file /etc/freeradius/mods-enabled/always > including configuration file /etc/freeradius/mods-enabled/realm > including configuration file /etc/freeradius/mods-enabled/exec > including configuration file /etc/freeradius/mods-enabled/ldap_google > including configuration file /etc/freeradius/mods-enabled/expr > including configuration file /etc/freeradius/mods-enabled/sradutmp > including files in directory /etc/freeradius/policy.d/ > including configuration file /etc/freeradius/policy.d/accounting > including configuration file /etc/freeradius/policy.d/cui > including configuration file /etc/freeradius/policy.d/canonicalization > including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids > including configuration file /etc/freeradius/policy.d/abfab-tr > including configuration file /etc/freeradius/policy.d/debug > including configuration file /etc/freeradius/policy.d/eap > including configuration file /etc/freeradius/policy.d/operator-name > including configuration file /etc/freeradius/policy.d/dhcp > including configuration file /etc/freeradius/policy.d/control > including configuration file /etc/freeradius/policy.d/filter > including configuration file /etc/freeradius/policy.d/rfc7542 > including files in directory /etc/freeradius/sites-enabled/ > including configuration file /etc/freeradius/sites-enabled/google-ldap-auth > including configuration file /etc/freeradius/sites-enabled/default > including configuration file /etc/freeradius/sites-enabled/check-eap-tls > including configuration file /etc/freeradius/sites-enabled/inner-tunnel > main { > security { > user = "freerad" > group = "freerad" > allow_core_dumps = no > } > name = "freeradius" > prefix = "/usr" > localstatedir = "/var" > logdir = "/var/log/freeradius" > run_dir = "/var/run/freeradius" > } > main { > name = "freeradius" > prefix = "/usr" > localstatedir = "/var" > sbindir = "/usr/sbin" > logdir = "/var/log/freeradius" > run_dir = "/var/run/freeradius" > libdir = "/usr/lib/freeradius" > radacctdir = "/var/log/freeradius/radacct" > hostname_lookups = no > max_request_time = 30 > proxy_dedup_window = 1 > cleanup_delay = 5 > max_requests = 16384 > max_fds = 512 > postauth_client_lost = no > pidfile = "/var/run/freeradius/freeradius.pid" > checkrad = "/usr/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > colourise = yes > msg_denied = "You are already logged in - access denied" > } > resources { > } > security { > max_attributes = 200 > reject_delay = 1.000000 > status_server = yes > require_message_authenticator = "auto" > limit_proxy_state = "auto" > } > unlang { > group_stop_return = no > policy_stop_return = no > } > } > radiusd: #### Loading Realms and Home Servers #### > proxy server { > retry_delay = 5 > retry_count = 3 > default_fallback = no > dead_time = 120 > wake_all_if_all_dead = no > } > home_server localhost { > nonblock = no > ipaddr = 127.0.0.1 > port = 1812 > type = "auth" > secret = <<< secret >>> > response_window = 20.000000 > response_timeouts = 1 > max_outstanding = 65536 > zombie_period = 40 > status_check = "status-server" > ping_interval = 30 > check_interval = 30 > check_timeout = 4 > num_answers_to_alive = 3 > revive_interval = 120 > limit { > max_connections = 16 > max_requests = 0 > lifetime = 0 > idle_timeout = 0 > } > coa { > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > } > home_server_pool my_auth_failover { > type = fail-over > home_server = localhost > } > realm example.com { > auth_pool = my_auth_failover > } > realm LOCAL { > } > radiusd: #### Loading Clients #### > client radiusserver_radtest_interlink { > ipaddr = 172.18.0.0/16 > secret = <<< secret >>> > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > Shared secret for client radiusserver_radtest_interlink is short, and > likely can be broken by an attacker. > client 300Tivoli { > ipaddr = wan1.normandy.taylorgorman.net IPv4 address [71.59.46.3] > secret = <<< secret >>> > proto = "*" > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > client localhost { > ipaddr = 127.0.0.1 > secret = <<< secret >>> > nas_type = "other" > proto = "*" > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 900 > } > } > Shared secret for client localhost is short, and likely can be broken by > an attacker. > client localhost_ipv6 { > ipv6addr = ::1 > secret = <<< secret >>> > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > Shared secret for client localhost_ipv6 is short, and likely can be > broken by an attacker. > Debug state unknown (cap_sys_ptrace capability not set) > Configuration version: 752e-6ff7-6ec8-d014 > systemd watchdog is disabled > # Creating Auth-Type = LDAP > # Creating Auth-Type = mschap > # Creating Auth-Type = digest > # Creating Auth-Type = eap > # Creating Auth-Type = PAP > # Creating Auth-Type = CHAP > # Creating Auth-Type = MS-CHAP > # Creating Autz-Type = New-TLS-Connection > radiusd: #### Instantiating modules #### > modules { > # Loaded module rlm_utf8 > # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 > # Loaded module rlm_totp > # Loading module "totp" from file /etc/freeradius/mods-enabled/totp > totp { > time_step = 30 > otp_length = 6 > lookback_steps = 1 > lookback_interval = 30 > lookforward_steps = 0 > } > # Loaded module rlm_date > # Loading module "date" from file /etc/freeradius/mods-enabled/date > date { > format = "%b %e %Y %H:%M:%S %Z" > utc = no > } > # Loading module "wispr2date" from file > /etc/freeradius/mods-enabled/date > date wispr2date { > format = "%Y-%m-%dT%H:%M:%S" > utc = no > } > # Loaded module rlm_proxy_rate_limit > # Loading module "proxy_rate_limit" from file > /etc/freeradius/mods-enabled/proxy_rate_limit > proxy_rate_limit { > max_entries = 2048 > idle_timeout = 10 > num_subtables = 256 > window = 1 > } > # Loaded module rlm_mschap > # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = yes > passchange { > } > allow_retry = yes > winbind_retry_with_normalised_username = no > } > # Loaded module rlm_cache > # Loading module "cache_auth_accept" from file > /etc/freeradius/mods-enabled/cache_auth > cache cache_auth_accept { > driver = "rlm_cache_rbtree" > key = > "%{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}}" > ttl = 7200 > max_entries = 0 > epoch = 0 > add_stats = no > } > # Loading module "cache_auth_reject" from file > /etc/freeradius/mods-enabled/cache_auth > cache cache_auth_reject { > driver = "rlm_cache_rbtree" > key = > "%{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}}" > ttl = 3600 > max_entries = 0 > epoch = 0 > add_stats = no > } > # Loading module "cache_ldap_user_dn" from file > /etc/freeradius/mods-enabled/cache_auth > cache cache_ldap_user_dn { > driver = "rlm_cache_rbtree" > key = "%{Stripped-User-Name}" > ttl = 86400 > max_entries = 0 > epoch = 0 > add_stats = no > } > # Loaded module rlm_attr_filter > # Loading module "attr_filter.post-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.post-proxy { > filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" > key = "%{Realm}" > relaxed = no > } > # Loading module "attr_filter.pre-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.pre-proxy { > filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" > key = "%{Realm}" > relaxed = no > } > # Loading module "attr_filter.access_reject" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.access_reject { > filename = "/etc/freeradius/mods-config/attr_filter/access_reject" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.access_challenge" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.access_challenge { > filename = > "/etc/freeradius/mods-config/attr_filter/access_challenge" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.accounting_response" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.accounting_response { > filename = > "/etc/freeradius/mods-config/attr_filter/accounting_response" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.coa" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.coa { > filename = "/etc/freeradius/mods-config/attr_filter/coa" > key = "%{User-Name}" > relaxed = no > } > # Loaded module rlm_detail > # Loading module "auth_log" from file > /etc/freeradius/mods-enabled/detail.log > detail auth_log { > filename = > > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > dates_as_integer = no > escape_filenames = no > log_packet_header = no > } > # Loading module "reply_log" from file > /etc/freeradius/mods-enabled/detail.log > detail reply_log { > filename = > > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > dates_as_integer = no > escape_filenames = no > log_packet_header = no > } > # Loading module "pre_proxy_log" from file > /etc/freeradius/mods-enabled/detail.log > detail pre_proxy_log { > filename = > > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > dates_as_integer = no > escape_filenames = no > log_packet_header = no > } > # Loading module "post_proxy_log" from file > /etc/freeradius/mods-enabled/detail.log > detail post_proxy_log { > filename = > > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > dates_as_integer = no > escape_filenames = no > log_packet_header = no > } > # Loaded module rlm_exec > # Loading module "ntlm_auth" from file > /etc/freeradius/mods-enabled/ntlm_auth > exec ntlm_auth { > wait = yes > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN > --username=%{mschap:User-Name} --password=%{User-Password}" > shell_escape = yes > } > # Loaded module rlm_expiration > # Loading module "expiration" from file > /etc/freeradius/mods-enabled/expiration > # Loaded module rlm_unix > # Loading module "unix" from file /etc/freeradius/mods-enabled/unix > unix { > radwtmp = "/var/log/freeradius/radwtmp" > } > Creating attribute Unix-Group > # Loading module "echo" from file /etc/freeradius/mods-enabled/echo > exec echo { > wait = yes > program = "/bin/echo %{User-Name}" > input_pairs = "request" > output_pairs = "reply" > shell_escape = yes > } > # Loaded module rlm_digest > # Loading module "digest" from file /etc/freeradius/mods-enabled/digest > # Loaded module rlm_files > # Loading module "files" from file /etc/freeradius/mods-enabled/files > files { > filename = "/etc/freeradius/mods-config/files/authorize" > acctusersfile = "/etc/freeradius/mods-config/files/accounting" > preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" > } > # Loaded module rlm_linelog > # Loading module "linelog" from file > /etc/freeradius/mods-enabled/linelog > linelog { > filename = "/var/log/freeradius/linelog" > escape_filenames = no > syslog_severity = "info" > permissions = 384 > format = "This is a log message for %{User-Name}" > reference = "messages.%{%{reply:Packet-Type}:-default}" > } > # Loading module "log_accounting" from file > /etc/freeradius/mods-enabled/linelog > linelog log_accounting { > filename = "/var/log/freeradius/linelog-accounting" > escape_filenames = no > syslog_severity = "info" > permissions = 384 > format = "" > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" > } > # Loaded module rlm_dynamic_clients > # Loading module "dynamic_clients" from file > /etc/freeradius/mods-enabled/dynamic_clients > # Loaded module rlm_preprocess > # Loading module "preprocess" from file > /etc/freeradius/mods-enabled/preprocess > preprocess { > huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" > hints = "/etc/freeradius/mods-config/preprocess/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > # Loaded module rlm_passwd > # Loading module "etc_passwd" from file > /etc/freeradius/mods-enabled/passwd > passwd etc_passwd { > filename = "/etc/passwd" > format = "*User-Name:Crypt-Password:" > delimiter = ":" > ignore_nislike = no > ignore_empty = yes > allow_multiple_keys = no > hash_size = 100 > } > # Loaded module rlm_chap > # Loading module "chap" from file /etc/freeradius/mods-enabled/chap > # Loaded module rlm_unpack > # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack > # Loaded module rlm_eap > # Loading module "eap" from file /etc/freeradius/mods-enabled/eap > eap { > default_eap_type = "ttls" > timer_expire = 60 > max_eap_type = 52 > ignore_unknown_eap_types = no > cisco_accounting_username_bug = no > max_sessions = 16384 > dedup_key = "" > } > # Loaded module rlm_replicate > # Loading module "replicate" from file > /etc/freeradius/mods-enabled/replicate > # Loaded module rlm_logintime > # Loading module "logintime" from file > /etc/freeradius/mods-enabled/logintime > logintime { > minimum_timeout = 60 > } > # Loaded module rlm_soh > # Loading module "soh" from file /etc/freeradius/mods-enabled/soh > soh { > dhcp = yes > } > # Loaded module rlm_radutmp > # Loading module "radutmp" from file > /etc/freeradius/mods-enabled/radutmp > radutmp { > filename = "/var/log/freeradius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 384 > caller_id = yes > } > # Loaded module rlm_pap > # Loading module "pap" from file /etc/freeradius/mods-enabled/pap > pap { > normalise = yes > } > # Loading module "detail" from file /etc/freeradius/mods-enabled/detail > detail { > filename = > > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > dates_as_integer = no > escape_filenames = no > log_packet_header = no > } > # Loaded module rlm_always > # Loading module "reject" from file /etc/freeradius/mods-enabled/always > always reject { > rcode = "reject" > simulcount = 0 > mpp = no > } > # Loading module "fail" from file /etc/freeradius/mods-enabled/always > always fail { > rcode = "fail" > simulcount = 0 > mpp = no > } > # Loading module "ok" from file /etc/freeradius/mods-enabled/always > always ok { > rcode = "ok" > simulcount = 0 > mpp = no > } > # Loading module "handled" from file /etc/freeradius/mods-enabled/always > always handled { > rcode = "handled" > simulcount = 0 > mpp = no > } > # Loading module "invalid" from file /etc/freeradius/mods-enabled/always > always invalid { > rcode = "invalid" > simulcount = 0 > mpp = no > } > # Loading module "userlock" from file > /etc/freeradius/mods-enabled/always > always userlock { > rcode = "userlock" > simulcount = 0 > mpp = no > } > # Loading module "notfound" from file > /etc/freeradius/mods-enabled/always > always notfound { > rcode = "notfound" > simulcount = 0 > mpp = no > } > # Loading module "noop" from file /etc/freeradius/mods-enabled/always > always noop { > rcode = "noop" > simulcount = 0 > mpp = no > } > # Loading module "updated" from file /etc/freeradius/mods-enabled/always > always updated { > rcode = "updated" > simulcount = 0 > mpp = no > } > # Loaded module rlm_realm > # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm > realm IPASS { > format = "prefix" > delimiter = "/" > ignore_default = no > ignore_null = no > } > # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm > realm bangpath { > format = "prefix" > delimiter = "!" > ignore_default = no > ignore_null = no > } > # Loading module "realmpercent" from file > /etc/freeradius/mods-enabled/realm > realm realmpercent { > format = "suffix" > delimiter = "%" > ignore_default = no > ignore_null = no > } > # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm > realm ntdomain { > format = "prefix" > delimiter = "\" > ignore_default = no > ignore_null = no > } > # Loading module "exec" from file /etc/freeradius/mods-enabled/exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > timeout = 10 > } > # Loaded module rlm_ldap > # Loading module "ldap_google" from file > /etc/freeradius/mods-enabled/ldap_google > ldap ldap_google { > server = "ldaps://ldap.google.com:636/" > identity = "MortifiedU" > password = <<< secret >>> > sasl { > } > user_dn = "LDAP-UserDn" > user { > scope = "sub" > access_positive = yes > sasl { > } > } > group { > filter = "(objectClass=posixGroup)" > scope = "sub" > name_attribute = "cn" > membership_attribute = "memberOf" > cacheable_name = no > cacheable_dn = yes > cache_attribute = "LDAP-Cached-Membership" > allow_dangling_group_ref = no > } > client { > scope = "sub" > base_dn = "" > } > profile { > } > options { > ldap_debug = 0 > chase_referrals = no > net_timeout = 3 > res_timeout = 10 > srv_timelimit = 3 > idle = 60 > probes = 3 > interval = 3 > } > tls { > certificate_file = "/etc/freeradius/certs/google/certificate.crt" > private_key_file = "/etc/freeradius/certs/google/key.key" > random_file = "/dev/urandom" > check_crl = no > start_tls = no > require_cert = "allow" > } > } > Creating attribute ldap_google-LDAP-Group > # Loaded module rlm_expr > # Loading module "expr" from file /etc/freeradius/mods-enabled/expr > expr { > safe_characters = > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" > } > # Loading module "sradutmp" from file > /etc/freeradius/mods-enabled/sradutmp > radutmp sradutmp { > filename = "/var/log/freeradius/sradutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 420 > caller_id = no > } > instantiate { > } > # Instantiating module "totp" from file > /etc/freeradius/mods-enabled/totp > # Instantiating module "proxy_rate_limit" from file > /etc/freeradius/mods-enabled/proxy_rate_limit > # Instantiating module "mschap" from file > /etc/freeradius/mods-enabled/mschap > rlm_mschap (mschap): using internal authentication > # Instantiating module "cache_auth_accept" from file > /etc/freeradius/mods-enabled/cache_auth > rlm_cache (cache_auth_accept): Driver rlm_cache_rbtree (module > rlm_cache_rbtree) loaded and linked > # Instantiating module "cache_auth_reject" from file > /etc/freeradius/mods-enabled/cache_auth > rlm_cache (cache_auth_reject): Driver rlm_cache_rbtree (module > rlm_cache_rbtree) loaded and linked > # Instantiating module "cache_ldap_user_dn" from file > /etc/freeradius/mods-enabled/cache_auth > rlm_cache (cache_ldap_user_dn): Driver rlm_cache_rbtree (module > rlm_cache_rbtree) loaded and linked > # Instantiating module "attr_filter.post-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy > # Instantiating module "attr_filter.pre-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy > # Instantiating module "attr_filter.access_reject" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject > # Instantiating module "attr_filter.access_challenge" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/mods-config/attr_filter/access_challenge > # Instantiating module "attr_filter.accounting_response" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/mods-config/attr_filter/accounting_response > # Instantiating module "attr_filter.coa" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/coa > # Instantiating module "auth_log" from file > /etc/freeradius/mods-enabled/detail.log > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in > detail output > # Instantiating module "reply_log" from file > /etc/freeradius/mods-enabled/detail.log > # Instantiating module "pre_proxy_log" from file > /etc/freeradius/mods-enabled/detail.log > # Instantiating module "post_proxy_log" from file > /etc/freeradius/mods-enabled/detail.log > # Instantiating module "expiration" from file > /etc/freeradius/mods-enabled/expiration > # Instantiating module "files" from file > /etc/freeradius/mods-enabled/files > reading pairlist file /etc/freeradius/mods-config/files/authorize > reading pairlist file /etc/freeradius/mods-config/files/accounting > reading pairlist file /etc/freeradius/mods-config/files/pre-proxy > # Instantiating module "linelog" from file > /etc/freeradius/mods-enabled/linelog > # Instantiating module "log_accounting" from file > /etc/freeradius/mods-enabled/linelog > # Instantiating module "preprocess" from file > /etc/freeradius/mods-enabled/preprocess > reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups > reading pairlist file /etc/freeradius/mods-config/preprocess/hints > # Instantiating module "etc_passwd" from file > /etc/freeradius/mods-enabled/passwd > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no > # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap > # Linked to sub-module rlm_eap_md5 > # Linked to sub-module rlm_eap_gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > # Linked to sub-module rlm_eap_tls > tls { > tls = "tls-common" > virtual_server = "check-eap-tls" > configurable_client_cert = no > } > tls-config tls-common { > verify_depth = 0 > ca_path = "/etc/freeradius/certs" > pem_file_type = yes > private_key_file = "/etc/freeradius/certs/server.pem" > certificate_file = "/etc/freeradius/certs/server.pem" > ca_file = "/etc/freeradius/certs/ca.pem" > private_key_password = <<< secret >>> > fragment_size = 1024 > include_length = yes > auto_chain = yes > check_crl = no > check_all_crl = no > ca_path_reload_interval = 0 > cipher_list = "DEFAULT" > cipher_server_preference = no > reject_unknown_intermediate_ca = no > ecdh_curve = "" > tls_max_version = "1.3" > tls_min_version = "1.2" > cache { > enable = yes > lifetime = 8 > name = "base-eap-cache" > max_entries = 255 > persist_dir = "/var/log/freeradius/tlscache" > } > verify { > skip_if_ocsp_ok = no > } > ocsp { > enable = no > override_cert_url = yes > url = "http://127.0.0.1/ocsp/" > use_nonce = yes > timeout = 0 > softfail = no > } > } > # Linked to sub-module rlm_eap_ttls > ttls { > tls = "tls-common" > default_eap_type = "md5" > copy_request_to_tunnel = no > use_tunneled_reply = no > virtual_server = "google-ldap-auth" > include_length = yes > require_client_cert = no > } > tls: Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_peap > peap { > tls = "tls-common" > default_eap_type = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = no > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > soh = no > require_client_cert = no > } > tls: Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_mschapv2 > mschapv2 { > with_ntdomain_hack = no > send_error = no > } > # Instantiating module "logintime" from file > /etc/freeradius/mods-enabled/logintime > # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap > # Instantiating module "detail" from file > /etc/freeradius/mods-enabled/detail > # Instantiating module "reject" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "fail" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "ok" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "handled" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "invalid" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "userlock" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "notfound" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "noop" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "updated" from file > /etc/freeradius/mods-enabled/always > # Instantiating module "IPASS" from file > /etc/freeradius/mods-enabled/realm > # Instantiating module "suffix" from file > /etc/freeradius/mods-enabled/realm > # Instantiating module "bangpath" from file > /etc/freeradius/mods-enabled/realm > # Instantiating module "realmpercent" from file > /etc/freeradius/mods-enabled/realm > # Instantiating module "ntdomain" from file > /etc/freeradius/mods-enabled/realm > # Instantiating module "ldap_google" from file > /etc/freeradius/mods-enabled/ldap_google > rlm_ldap: libldap vendor: OpenLDAP, version: 20518 > rlm_ldap (ldap_google): Couldn't find configuration for accounting, will > return NOOP for calls from this section > rlm_ldap (ldap_google): Couldn't find configuration for post-auth, will > return NOOP for calls from this section > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > !! libldap is using GnuTLS, while FreeRADIUS is using OpenSSL > !! There may be random issues with TLS connections due to this conflict. > !! The server may also crash. > !! See https://wiki.freeradius.org/modules/Rlm_ldap for more information. > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > rlm_ldap (ldap_google): Initialising connection pool > pool { > start = 5 > min = 3 > max = 32 > spare = 10 > uses = 0 > lifetime = 0 > cleanup_interval = 30 > idle_timeout = 60 > retry_delay = 30 > max_retries = 5 > spread = no > } > rlm_ldap (ldap_google): Opening additional connection (0), 1 of 32 > pending slots used > rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap_google): Waiting for bind result... > rlm_ldap (ldap_google): Bind successful > rlm_ldap (ldap_google): Opening additional connection (1), 1 of 31 > pending slots used > rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap_google): Waiting for bind result... > rlm_ldap (ldap_google): Bind successful > rlm_ldap (ldap_google): Opening additional connection (2), 1 of 30 > pending slots used > rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap_google): Waiting for bind result... > rlm_ldap (ldap_google): Bind successful > rlm_ldap (ldap_google): Opening additional connection (3), 1 of 29 > pending slots used > rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap_google): Waiting for bind result... > rlm_ldap (ldap_google): Bind successful > rlm_ldap (ldap_google): Opening additional connection (4), 1 of 28 > pending slots used > rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap_google): Waiting for bind result... > rlm_ldap (ldap_google): Bind successful > } # modules > radiusd: #### Loading Virtual Servers #### > server { # from file /etc/freeradius/radiusd.conf > } # server > server google-ldap-auth { # from file > /etc/freeradius/sites-enabled/google-ldap-auth > # Loading authenticate {...} > Compiling Auth-Type LDAP for attr Auth-Type > # Loading authorize {...} > # Loading post-auth {...} > Compiling Post-Auth-Type REJECT for attr Post-Auth-Type > } # server google-ldap-auth > server default { # from file /etc/freeradius/sites-enabled/default > # Loading authenticate {...} > Compiling Auth-Type PAP for attr Auth-Type > Compiling Auth-Type CHAP for attr Auth-Type > Compiling Auth-Type MS-CHAP for attr Auth-Type > Compiling Auth-Type LDAP for attr Auth-Type > # Loading authorize {...} > Ignoring "sql" (see raddb/mods-available/README.rst) > Compiling Autz-Type New-TLS-Connection for attr Autz-Type > # Loading preacct {...} > # Loading accounting {...} > # Loading post-auth {...} > Compiling Post-Auth-Type REJECT for attr Post-Auth-Type > Compiling Post-Auth-Type Challenge for attr Post-Auth-Type > Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type > } # server default > server check-eap-tls { # from file > /etc/freeradius/sites-enabled/check-eap-tls > # Loading authorize {...} > } # server check-eap-tls > server inner-tunnel { # from file > /etc/freeradius/sites-enabled/inner-tunnel > # Loading authenticate {...} > Compiling Auth-Type PAP for attr Auth-Type > Compiling Auth-Type CHAP for attr Auth-Type > Compiling Auth-Type MS-CHAP for attr Auth-Type > Compiling Auth-Type LDAP for attr Auth-Type > # Loading authorize {...} > Ignoring "ldap" (see raddb/mods-available/README.rst) > # Loading post-proxy {...} > # Loading post-auth {...} > # Skipping contents of 'if' as it is always 'false' -- > /etc/freeradius/sites-enabled/inner-tunnel:366 > Compiling Post-Auth-Type REJECT for attr Post-Auth-Type > } # server inner-tunnel > radiusd: #### Opening IP addresses and Ports #### > listen { > type = "auth" > ipaddr = 127.0.0.1 > port = 18123 > } > listen { > type = "auth" > ipaddr = * > port = 1812 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 900 > } > } > listen { > type = "acct" > ipaddr = * > port = 1813 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "auth" > ipv6addr = :: > port = 1812 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "acct" > ipv6addr = :: > port = 1813 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "auth" > ipaddr = 127.0.0.1 > port = 18120 > } > Listening on auth address 127.0.0.1 port 18123 bound to server > google-ldap-auth > Listening on auth address * port 1812 bound to server default > Listening on acct address * port 1813 bound to server default > Listening on auth address :: port 1812 bound to server default > Listening on acct address :: port 1813 bound to server default > Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel > Listening on proxy address * port 43959 > Listening on proxy address :: port 57843 > Ready to process requests > (0) Received Access-Request Id 7 from 71.59.46.3:50614 to > 172.17.0.2:1812 length 279 > (0) User-Name = "[email protected]" > (0) NAS-IP-Address = 10.0.10.44 > (0) NAS-Identifier = "default" > (0) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" > (0) NAS-Port-Type = Wireless-802.11 > (0) Service-Type = Framed-User > (0) Calling-Station-Id = "30-35-AD-A5-B9-A6" > (0) Connect-Info = "CONNECT 0Mbps 802.11b" > (0) Acct-Session-Id = "2CD80055E5E3D815" > (0) Acct-Multi-Session-Id = "C462484392D6AC24" > (0) WLAN-Pairwise-Cipher = 1027076 > (0) WLAN-Group-Cipher = 1027076 > (0) WLAN-AKM-Suite = 1027077 > (0) WLAN-Group-Mgmt-Cipher = 1027078 > (0) Filter-Id = "wpa-eap" > (0) Framed-MTU = 1002 > (0) EAP-Message = > 0x0223002001726164697573746573744074686563616d7075737761792e636f6d > (0) Message-Authenticator = 0x99176599a9049015a131259af64cb46e > (0) # Executing section authorize from file > /etc/freeradius/sites-enabled/default > (0) authorize { > (0) policy filter_username { > (0) if (&User-Name) { > (0) if (&User-Name) -> TRUE > (0) if (&User-Name) { > (0) if (&User-Name =~ / /) { > (0) if (&User-Name =~ / /) -> FALSE > (0) if (&User-Name =~ /@[^@]*@/ ) { > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (0) if (&User-Name =~ /\.\./ ) { > (0) if (&User-Name =~ /\.\./ ) -> FALSE > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) > -> FALSE > (0) if (&User-Name =~ /\.$/) { > (0) if (&User-Name =~ /\.$/) -> FALSE > (0) if (&User-Name =~ /@\./) { > (0) if (&User-Name =~ /@\./) -> FALSE > (0) } # if (&User-Name) = notfound > (0) } # policy filter_username = notfound > (0) [preprocess] = ok > (0) auth_log: EXPAND > > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > (0) auth_log: --> > /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (0) auth_log: > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > > expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (0) auth_log: EXPAND %t > (0) auth_log: --> Tue Jul 8 17:06:54 2025 > (0) [auth_log] = ok > (0) [chap] = noop > (0) [mschap] = noop > (0) [digest] = noop > (0) policy rewrite_called_station_id { > (0) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (0) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > -> TRUE > (0) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (0) update request { > (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > (0) --> 78-8A-20-58-6E-4E > (0) &Called-Station-Id := 78-8A-20-58-6E-4E > (0) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} > (0) --> 0x788A20586E4E > (0) &Called-Station-MAC := 0x788a20586e4e > (0) } # update request = noop > (0) if ("%{8}") { > (0) EXPAND %{8} > (0) --> CampusInternal > (0) if ("%{8}") -> TRUE > (0) if ("%{8}") { > (0) update request { > (0) EXPAND %{8} > (0) --> CampusInternal > (0) &Called-Station-SSID := CampusInternal > (0) } # update request = noop > (0) } # if ("%{8}") = noop > (0) [updated] = updated > (0) } # if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > = updated > (0) ... skipping else: Preceding "if" was taken > (0) } # policy rewrite_called_station_id = updated > (0) suffix: Checking for suffix after "@" > (0) suffix: Looking up realm "thecampusway.com" for User-Name = > "[email protected]" > (0) suffix: No such realm "thecampusway.com" > (0) [suffix] = noop > (0) eap: Peer sent EAP Response (code 2) ID 35 length 32 > (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the > rest of authorize > (0) [eap] = ok > (0) } # authorize = ok > (0) Found Auth-Type = eap > (0) # Executing group from file /etc/freeradius/sites-enabled/default > (0) authenticate { > (0) eap: Peer sent packet with method EAP Identity (1) > (0) eap: Using default_eap_type = TTLS > (0) eap: Calling submodule eap_ttls to process data > (0) eap_ttls: (TLS) TTLS -Initiating new session > (0) eap: Sending EAP Request (code 1) ID 36 length 6 > (0) eap: EAP session adding &reply:State = 0x03aa1051038e0583 > (0) [eap] = handled > (0) } # authenticate = handled > (0) Using Post-Auth-Type Challenge > (0) # Executing group from file /etc/freeradius/sites-enabled/default > (0) Challenge { ... } # empty sub-section is ignored > (0) session-state: Saving cached attributes > (0) Framed-MTU = 994 > (0) Sent Access-Challenge Id 7 from 172.17.0.2:1812 to 71.59.46.3:50614 > length 64 > (0) EAP-Message = 0x012400061520 > (0) Message-Authenticator = 0x00000000000000000000000000000000 > (0) State = 0x03aa1051038e0583178612c213b1973d > (0) Finished request > Waking up in 4.9 seconds. > (1) Received Access-Request Id 8 from 71.59.46.3:50614 to > 172.17.0.2:1812 length 426 > (1) User-Name = "[email protected]" > (1) NAS-IP-Address = 10.0.10.44 > (1) NAS-Identifier = "default" > (1) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" > (1) NAS-Port-Type = Wireless-802.11 > (1) Service-Type = Framed-User > (1) Calling-Station-Id = "30-35-AD-A5-B9-A6" > (1) Connect-Info = "CONNECT 0Mbps 802.11b" > (1) Acct-Session-Id = "2CD80055E5E3D815" > (1) Acct-Multi-Session-Id = "C462484392D6AC24" > (1) WLAN-Pairwise-Cipher = 1027076 > (1) WLAN-Group-Cipher = 1027076 > (1) WLAN-AKM-Suite = 1027077 > (1) WLAN-Group-Mgmt-Cipher = 1027078 > (1) Filter-Id = "wpa-eap" > (1) Framed-MTU = 1002 > (1) EAP-Message = > > 0x022400a115800000009716030100920100008e0303686d502e471b6ec9eeeadb59cbb76ec7ef7cb1fa459defde87ba81a8f1cae83700002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 > (1) State = 0x03aa1051038e0583178612c213b1973d > (1) Message-Authenticator = 0x1771f89eede34a34666acd191581c527 > (1) Restoring &session-state > (1) &session-state:Framed-MTU = 994 > (1) # Executing section authorize from file > /etc/freeradius/sites-enabled/default > (1) authorize { > (1) policy filter_username { > (1) if (&User-Name) { > (1) if (&User-Name) -> TRUE > (1) if (&User-Name) { > (1) if (&User-Name =~ / /) { > (1) if (&User-Name =~ / /) -> FALSE > (1) if (&User-Name =~ /@[^@]*@/ ) { > (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (1) if (&User-Name =~ /\.\./ ) { > (1) if (&User-Name =~ /\.\./ ) -> FALSE > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) > -> FALSE > (1) if (&User-Name =~ /\.$/) { > (1) if (&User-Name =~ /\.$/) -> FALSE > (1) if (&User-Name =~ /@\./) { > (1) if (&User-Name =~ /@\./) -> FALSE > (1) } # if (&User-Name) = notfound > (1) } # policy filter_username = notfound > (1) [preprocess] = ok > (1) auth_log: EXPAND > > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > (1) auth_log: --> > /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (1) auth_log: > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > > expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (1) auth_log: EXPAND %t > (1) auth_log: --> Tue Jul 8 17:06:54 2025 > (1) [auth_log] = ok > (1) [chap] = noop > (1) [mschap] = noop > (1) [digest] = noop > (1) policy rewrite_called_station_id { > (1) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (1) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > -> TRUE > (1) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (1) update request { > (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > (1) --> 78-8A-20-58-6E-4E > (1) &Called-Station-Id := 78-8A-20-58-6E-4E > (1) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} > (1) --> 0x788A20586E4E > (1) &Called-Station-MAC := 0x788a20586e4e > (1) } # update request = noop > (1) if ("%{8}") { > (1) EXPAND %{8} > (1) --> CampusInternal > (1) if ("%{8}") -> TRUE > (1) if ("%{8}") { > (1) update request { > (1) EXPAND %{8} > (1) --> CampusInternal > (1) &Called-Station-SSID := CampusInternal > (1) } # update request = noop > (1) } # if ("%{8}") = noop > (1) [updated] = updated > (1) } # if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > = updated > (1) ... skipping else: Preceding "if" was taken > (1) } # policy rewrite_called_station_id = updated > (1) suffix: Checking for suffix after "@" > (1) suffix: Looking up realm "thecampusway.com" for User-Name = > "[email protected]" > (1) suffix: No such realm "thecampusway.com" > (1) [suffix] = noop > (1) eap: Peer sent EAP Response (code 2) ID 36 length 161 > (1) eap: Continuing tunnel setup > (1) [eap] = ok > (1) } # authorize = ok > (1) Found Auth-Type = eap > (1) # Executing group from file /etc/freeradius/sites-enabled/default > (1) authenticate { > (1) eap: Removing EAP session with state 0x03aa1051038e0583 > (1) eap: Previous EAP request found for state 0x03aa1051038e0583, > released from the list > (1) eap: Peer sent packet with method EAP TTLS (21) > (1) eap: Calling submodule eap_ttls to process data > (1) eap_ttls: Authenticate > (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 > bytes > (1) eap_ttls: (TLS) EAP Got all data (151 bytes) > (1) eap_ttls: (TLS) TTLS - Handshake state - before SSL initialization > (1) eap_ttls: (TLS) TTLS - Handshake state - Server before SSL > initialization > (1) eap_ttls: (TLS) TTLS - Handshake state - Server before SSL > initialization > (1) eap_ttls: (TLS) TTLS - recv TLS 1.3 Handshake, ClientHello > (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS read > client hello > (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, ServerHello > (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write > server hello > (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, Certificate > (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write > certificate > (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange > (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write key > exchange > (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone > (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write > server done > (1) eap_ttls: (TLS) TTLS - Server : Need to read more data: SSLv3/TLS > write server done > (1) eap_ttls: (TLS) TTLS - In Handshake Phase > (1) eap: Sending EAP Request (code 1) ID 37 length 1000 > (1) eap: EAP session adding &reply:State = 0x03aa1051028f0583 > (1) [eap] = handled > (1) } # authenticate = handled > (1) Using Post-Auth-Type Challenge > (1) # Executing group from file /etc/freeradius/sites-enabled/default > (1) Challenge { ... } # empty sub-section is ignored > (1) session-state: Saving cached attributes > (1) Framed-MTU = 994 > (1) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, > ClientHello" > (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHello" > (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > Certificate" > (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerKeyExchange" > (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHelloDone" > (1) Sent Access-Challenge Id 8 from 172.17.0.2:1812 to 71.59.46.3:50614 > length 1064 > (1) EAP-Message = > > 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 > (1) Message-Authenticator = 0x00000000000000000000000000000000 > (1) State = 0x03aa1051028f0583178612c213b1973d > (1) Finished request > Waking up in 4.9 seconds. > (2) Received Access-Request Id 9 from 71.59.46.3:50614 to > 172.17.0.2:1812 length 271 > (2) User-Name = "[email protected]" > (2) NAS-IP-Address = 10.0.10.44 > (2) NAS-Identifier = "default" > (2) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" > (2) NAS-Port-Type = Wireless-802.11 > (2) Service-Type = Framed-User > (2) Calling-Station-Id = "30-35-AD-A5-B9-A6" > (2) Connect-Info = "CONNECT 0Mbps 802.11b" > (2) Acct-Session-Id = "2CD80055E5E3D815" > (2) Acct-Multi-Session-Id = "C462484392D6AC24" > (2) WLAN-Pairwise-Cipher = 1027076 > (2) WLAN-Group-Cipher = 1027076 > (2) WLAN-AKM-Suite = 1027077 > (2) WLAN-Group-Mgmt-Cipher = 1027078 > (2) Filter-Id = "wpa-eap" > (2) Framed-MTU = 1002 > (2) EAP-Message = 0x022500061500 > (2) State = 0x03aa1051028f0583178612c213b1973d > (2) Message-Authenticator = 0xc06f6349e2aa457f3ba04bf1b4094885 > (2) Restoring &session-state > (2) &session-state:Framed-MTU = 994 > (2) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS > 1.3 Handshake, ClientHello" > (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerHello" > (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, Certificate" > (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerKeyExchange" > (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerHelloDone" > (2) # Executing section authorize from file > /etc/freeradius/sites-enabled/default > (2) authorize { > (2) policy filter_username { > (2) if (&User-Name) { > (2) if (&User-Name) -> TRUE > (2) if (&User-Name) { > (2) if (&User-Name =~ / /) { > (2) if (&User-Name =~ / /) -> FALSE > (2) if (&User-Name =~ /@[^@]*@/ ) { > (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (2) if (&User-Name =~ /\.\./ ) { > (2) if (&User-Name =~ /\.\./ ) -> FALSE > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) > -> FALSE > (2) if (&User-Name =~ /\.$/) { > (2) if (&User-Name =~ /\.$/) -> FALSE > (2) if (&User-Name =~ /@\./) { > (2) if (&User-Name =~ /@\./) -> FALSE > (2) } # if (&User-Name) = notfound > (2) } # policy filter_username = notfound > (2) [preprocess] = ok > (2) auth_log: EXPAND > > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > (2) auth_log: --> > /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (2) auth_log: > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > > expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (2) auth_log: EXPAND %t > (2) auth_log: --> Tue Jul 8 17:06:54 2025 > (2) [auth_log] = ok > (2) [chap] = noop > (2) [mschap] = noop > (2) [digest] = noop > (2) policy rewrite_called_station_id { > (2) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (2) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > -> TRUE > (2) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (2) update request { > (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > (2) --> 78-8A-20-58-6E-4E > (2) &Called-Station-Id := 78-8A-20-58-6E-4E > (2) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} > (2) --> 0x788A20586E4E > (2) &Called-Station-MAC := 0x788a20586e4e > (2) } # update request = noop > (2) if ("%{8}") { > (2) EXPAND %{8} > (2) --> CampusInternal > (2) if ("%{8}") -> TRUE > (2) if ("%{8}") { > (2) update request { > (2) EXPAND %{8} > (2) --> CampusInternal > (2) &Called-Station-SSID := CampusInternal > (2) } # update request = noop > (2) } # if ("%{8}") = noop > (2) [updated] = updated > (2) } # if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > = updated > (2) ... skipping else: Preceding "if" was taken > (2) } # policy rewrite_called_station_id = updated > (2) suffix: Checking for suffix after "@" > (2) suffix: Looking up realm "thecampusway.com" for User-Name = > "[email protected]" > (2) suffix: No such realm "thecampusway.com" > (2) [suffix] = noop > (2) eap: Peer sent EAP Response (code 2) ID 37 length 6 > (2) eap: Continuing tunnel setup > (2) [eap] = ok > (2) } # authorize = ok > (2) Found Auth-Type = eap > (2) # Executing group from file /etc/freeradius/sites-enabled/default > (2) authenticate { > (2) eap: Removing EAP session with state 0x03aa1051028f0583 > (2) eap: Previous EAP request found for state 0x03aa1051028f0583, > released from the list > (2) eap: Peer sent packet with method EAP TTLS (21) > (2) eap: Calling submodule eap_ttls to process data > (2) eap_ttls: Authenticate > (2) eap_ttls: (TLS) Peer ACKed our handshake fragment > (2) eap: Sending EAP Request (code 1) ID 38 length 1000 > (2) eap: EAP session adding &reply:State = 0x03aa1051018c0583 > (2) [eap] = handled > (2) } # authenticate = handled > (2) Using Post-Auth-Type Challenge > (2) # Executing group from file /etc/freeradius/sites-enabled/default > (2) Challenge { ... } # empty sub-section is ignored > (2) session-state: Saving cached attributes > (2) Framed-MTU = 994 > (2) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, > ClientHello" > (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHello" > (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > Certificate" > (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerKeyExchange" > (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHelloDone" > (2) Sent Access-Challenge Id 9 from 172.17.0.2:1812 to 71.59.46.3:50614 > length 1064 > (2) EAP-Message = > > 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 > (2) Message-Authenticator = 0x00000000000000000000000000000000 > (2) State = 0x03aa1051018c0583178612c213b1973d > (2) Finished request > Waking up in 4.9 seconds. > (3) Received Access-Request Id 10 from 71.59.46.3:50614 to > 172.17.0.2:1812 length 271 > (3) User-Name = "[email protected]" > (3) NAS-IP-Address = 10.0.10.44 > (3) NAS-Identifier = "default" > (3) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" > (3) NAS-Port-Type = Wireless-802.11 > (3) Service-Type = Framed-User > (3) Calling-Station-Id = "30-35-AD-A5-B9-A6" > (3) Connect-Info = "CONNECT 0Mbps 802.11b" > (3) Acct-Session-Id = "2CD80055E5E3D815" > (3) Acct-Multi-Session-Id = "C462484392D6AC24" > (3) WLAN-Pairwise-Cipher = 1027076 > (3) WLAN-Group-Cipher = 1027076 > (3) WLAN-AKM-Suite = 1027077 > (3) WLAN-Group-Mgmt-Cipher = 1027078 > (3) Filter-Id = "wpa-eap" > (3) Framed-MTU = 1002 > (3) EAP-Message = 0x022600061500 > (3) State = 0x03aa1051018c0583178612c213b1973d > (3) Message-Authenticator = 0xf938181e70d289aaa9c97c49842228ee > (3) Restoring &session-state > (3) &session-state:Framed-MTU = 994 > (3) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS > 1.3 Handshake, ClientHello" > (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerHello" > (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, Certificate" > (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerKeyExchange" > (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerHelloDone" > (3) # Executing section authorize from file > /etc/freeradius/sites-enabled/default > (3) authorize { > (3) policy filter_username { > (3) if (&User-Name) { > (3) if (&User-Name) -> TRUE > (3) if (&User-Name) { > (3) if (&User-Name =~ / /) { > (3) if (&User-Name =~ / /) -> FALSE > (3) if (&User-Name =~ /@[^@]*@/ ) { > (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (3) if (&User-Name =~ /\.\./ ) { > (3) if (&User-Name =~ /\.\./ ) -> FALSE > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) > -> FALSE > (3) if (&User-Name =~ /\.$/) { > (3) if (&User-Name =~ /\.$/) -> FALSE > (3) if (&User-Name =~ /@\./) { > (3) if (&User-Name =~ /@\./) -> FALSE > (3) } # if (&User-Name) = notfound > (3) } # policy filter_username = notfound > (3) [preprocess] = ok > (3) auth_log: EXPAND > > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > (3) auth_log: --> > /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (3) auth_log: > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > > expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (3) auth_log: EXPAND %t > (3) auth_log: --> Tue Jul 8 17:06:54 2025 > (3) [auth_log] = ok > (3) [chap] = noop > (3) [mschap] = noop > (3) [digest] = noop > (3) policy rewrite_called_station_id { > (3) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (3) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > -> TRUE > (3) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (3) update request { > (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > (3) --> 78-8A-20-58-6E-4E > (3) &Called-Station-Id := 78-8A-20-58-6E-4E > (3) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} > (3) --> 0x788A20586E4E > (3) &Called-Station-MAC := 0x788a20586e4e > (3) } # update request = noop > (3) if ("%{8}") { > (3) EXPAND %{8} > (3) --> CampusInternal > (3) if ("%{8}") -> TRUE > (3) if ("%{8}") { > (3) update request { > (3) EXPAND %{8} > (3) --> CampusInternal > (3) &Called-Station-SSID := CampusInternal > (3) } # update request = noop > (3) } # if ("%{8}") = noop > (3) [updated] = updated > (3) } # if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > = updated > (3) ... skipping else: Preceding "if" was taken > (3) } # policy rewrite_called_station_id = updated > (3) suffix: Checking for suffix after "@" > (3) suffix: Looking up realm "thecampusway.com" for User-Name = > "[email protected]" > (3) suffix: No such realm "thecampusway.com" > (3) [suffix] = noop > (3) eap: Peer sent EAP Response (code 2) ID 38 length 6 > (3) eap: Continuing tunnel setup > (3) [eap] = ok > (3) } # authorize = ok > (3) Found Auth-Type = eap > (3) # Executing group from file /etc/freeradius/sites-enabled/default > (3) authenticate { > (3) eap: Removing EAP session with state 0x03aa1051018c0583 > (3) eap: Previous EAP request found for state 0x03aa1051018c0583, > released from the list > (3) eap: Peer sent packet with method EAP TTLS (21) > (3) eap: Calling submodule eap_ttls to process data > (3) eap_ttls: Authenticate > (3) eap_ttls: (TLS) Peer ACKed our handshake fragment > (3) eap: Sending EAP Request (code 1) ID 39 length 1000 > (3) eap: EAP session adding &reply:State = 0x03aa1051008d0583 > (3) [eap] = handled > (3) } # authenticate = handled > (3) Using Post-Auth-Type Challenge > (3) # Executing group from file /etc/freeradius/sites-enabled/default > (3) Challenge { ... } # empty sub-section is ignored > (3) session-state: Saving cached attributes > (3) Framed-MTU = 994 > (3) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, > ClientHello" > (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHello" > (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > Certificate" > (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerKeyExchange" > (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHelloDone" > (3) Sent Access-Challenge Id 10 from 172.17.0.2:1812 to 71.59.46.3:50614 > length 1064 > (3) EAP-Message = > > 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 > (3) Message-Authenticator = 0x00000000000000000000000000000000 > (3) State = 0x03aa1051008d0583178612c213b1973d > (3) Finished request > Waking up in 4.8 seconds. > (4) Received Access-Request Id 11 from 71.59.46.3:50614 to > 172.17.0.2:1812 length 271 > (4) User-Name = "[email protected]" > (4) NAS-IP-Address = 10.0.10.44 > (4) NAS-Identifier = "default" > (4) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" > (4) NAS-Port-Type = Wireless-802.11 > (4) Service-Type = Framed-User > (4) Calling-Station-Id = "30-35-AD-A5-B9-A6" > (4) Connect-Info = "CONNECT 0Mbps 802.11b" > (4) Acct-Session-Id = "2CD80055E5E3D815" > (4) Acct-Multi-Session-Id = "C462484392D6AC24" > (4) WLAN-Pairwise-Cipher = 1027076 > (4) WLAN-Group-Cipher = 1027076 > (4) WLAN-AKM-Suite = 1027077 > (4) WLAN-Group-Mgmt-Cipher = 1027078 > (4) Filter-Id = "wpa-eap" > (4) Framed-MTU = 1002 > (4) EAP-Message = 0x022700061500 > (4) State = 0x03aa1051008d0583178612c213b1973d > (4) Message-Authenticator = 0x71f254904fce529fa0fc4e9fe4e0420e > (4) Restoring &session-state > (4) &session-state:Framed-MTU = 994 > (4) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS > 1.3 Handshake, ClientHello" > (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerHello" > (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, Certificate" > (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerKeyExchange" > (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS > 1.2 Handshake, ServerHelloDone" > (4) # Executing section authorize from file > /etc/freeradius/sites-enabled/default > (4) authorize { > (4) policy filter_username { > (4) if (&User-Name) { > (4) if (&User-Name) -> TRUE > (4) if (&User-Name) { > (4) if (&User-Name =~ / /) { > (4) if (&User-Name =~ / /) -> FALSE > (4) if (&User-Name =~ /@[^@]*@/ ) { > (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (4) if (&User-Name =~ /\.\./ ) { > (4) if (&User-Name =~ /\.\./ ) -> FALSE > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) > -> FALSE > (4) if (&User-Name =~ /\.$/) { > (4) if (&User-Name =~ /\.$/) -> FALSE > (4) if (&User-Name =~ /@\./) { > (4) if (&User-Name =~ /@\./) -> FALSE > (4) } # if (&User-Name) = notfound > (4) } # policy filter_username = notfound > (4) [preprocess] = ok > (4) auth_log: EXPAND > > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > (4) auth_log: --> > /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (4) auth_log: > /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d > > expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250708 > (4) auth_log: EXPAND %t > (4) auth_log: --> Tue Jul 8 17:06:54 2025 > (4) [auth_log] = ok > (4) [chap] = noop > (4) [mschap] = noop > (4) [digest] = noop > (4) policy rewrite_called_station_id { > (4) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (4) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > -> TRUE > (4) if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > { > (4) update request { > (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > (4) --> 78-8A-20-58-6E-4E > (4) &Called-Station-Id := 78-8A-20-58-6E-4E > (4) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} > (4) --> 0x788A20586E4E > (4) &Called-Station-MAC := 0x788a20586e4e > (4) } # update request = noop > (4) if ("%{8}") { > (4) EXPAND %{8} > (4) --> CampusInternal > (4) if ("%{8}") -> TRUE > (4) if ("%{8}") { > (4) update request { > (4) EXPAND %{8} > (4) --> CampusInternal > (4) &Called-Station-SSID := CampusInternal > (4) } # update request = noop > (4) } # if ("%{8}") = noop > (4) [updated] = updated > (4) } # if (&Called-Station-Id && (&Called-Station-Id =~ > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) > > = updated > (4) ... skipping else: Preceding "if" was taken > (4) } # policy rewrite_called_station_id = updated > (4) suffix: Checking for suffix after "@" > (4) suffix: Looking up realm "thecampusway.com" for User-Name = > "[email protected]" > (4) suffix: No such realm "thecampusway.com" > (4) [suffix] = noop > (4) eap: Peer sent EAP Response (code 2) ID 39 length 6 > (4) eap: Continuing tunnel setup > (4) [eap] = ok > (4) } # authorize = ok > (4) Found Auth-Type = eap > (4) # Executing group from file /etc/freeradius/sites-enabled/default > (4) authenticate { > (4) eap: Removing EAP session with state 0x03aa1051008d0583 > (4) eap: Previous EAP request found for state 0x03aa1051008d0583, > released from the list > (4) eap: Peer sent packet with method EAP TTLS (21) > (4) eap: Calling submodule eap_ttls to process data > (4) eap_ttls: Authenticate > (4) eap_ttls: (TLS) Peer ACKed our handshake fragment > (4) eap: Sending EAP Request (code 1) ID 40 length 14 > (4) eap: EAP session adding &reply:State = 0x03aa105107820583 > (4) [eap] = handled > (4) } # authenticate = handled > (4) Using Post-Auth-Type Challenge > (4) # Executing group from file /etc/freeradius/sites-enabled/default > (4) Challenge { ... } # empty sub-section is ignored > (4) session-state: Saving cached attributes > (4) Framed-MTU = 994 > (4) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, > ClientHello" > (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHello" > (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > Certificate" > (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerKeyExchange" > (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, > ServerHelloDone" > (4) Sent Access-Challenge Id 11 from 172.17.0.2:1812 to 71.59.46.3:50614 > length 72 > (4) EAP-Message = 0x0128000e158000000b9e0e000000 > (4) Message-Authenticator = 0x00000000000000000000000000000000 > (4) State = 0x03aa105107820583178612c213b1973d > (4) Finished request > Waking up in 4.8 seconds. > (5) Received Access-Request Id 12 from 71.59.46.3:50614 to > 172.17.0.2:1812 length 401 > (5) User-Name = "[email protected]" > (5) NAS-IP-Address = 10.0.10.44 > (5) NAS-Identifier = "default" > (5) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" > (5) NAS-Port-Type = Wireless-802.11 > (5) Service-Type = Framed-User > (5) Calling-Station-Id = "30-35-AD-A5-B9-A6" > (5) Connect-Info = "CONNECT 0Mbps 802.11b" > (5) Acct-Session-Id = "2CD80055E5E3D815" > (5) Acct-Multi-Session-Id = "C462484392D6AC24" > (5) WLAN-Pairwise-Cipher = 1027076 > (5) WLAN-Group-Cipher = 1027076 > (5) WLAN-AKM-Suite = 1027077 > (5) WLAN-Group-Mgmt-Cipher = 1027078 > (5) Filter-Id = "wpa-eap" > (5) Framed-MTU = 1002 > (5) EAP-Message = > > 0x0228008815800000007e1603030046100000424104f87f7bdd5321da1823aaedf3cd09d62b6e5d21256c9099da611acbae6d8d1723ab1f895e34a14f549ad6a9172d7166bccf01d2eaf59748b1d89f3e0017e8dcf314030300010116030300287008d26c1da49b8327023ccbee1e649fb5f095b37bc5a5a14e41e0478fce1a9026e5999184b3920d > (5) State = 0x03aa105107820583178612c213b1973d > (5) Message-Authenticator = 0x96854403b1ef6d478ee71a044a447b6e > (5) Re - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html