FreeRADIUS 3.2.8 with EAP-FAST: MS-CHAP2-Response is incorrect
Dennis Bland <[email protected]> Sun, 4 Jan 2026 21:16:26 -0700
| Newsgroups | gmane.comp.freeradius.user |
|---|---|
| Message-ID | <CAPRryQqCO1=Rq-2-wt8o3nYKmmxoFXe7Ha1QJsmK65gpSi-vvg@mail.gmail.com> |
Hi FreeRADIUS: I've compiled/installed FreeRADIUS 3.2.8 on Ubuntu 24.04 (Linux 6.8.0 and OpenSSL 3.0.13), and it gives the attached "MS-CHAP2 Response is incorrect" error during inner tunnel negotiation in Phase 0 (PAC file creation) of EAP-FAST. Upgrading the Linux kernel to 6.16 and OpenSSL 3.0.16 gives the same result. Compiling the latest FreeRADIUS 3.2.x branch head (3.2.9 dev) as of a few days ago also gives the same result. Note that EAP-PEAP/MSCHAPV2 works fine (log also attached) on the identical supplicant / authenticator / authentication server platform. The supplicant is also on a Ubuntu 24.04 platform (OpenSSL 3.0.13), running the latest snapshot of wpa_supplicant, and TLS 1.3 has been confirmed working with EAP-PEAP when tls_max is set to 1.3 in FreeRADIUS on the authentication server. Supplicant version: dbland@NUC13-Linux2:~$ wpa_supplicant -v wpa_supplicant v2.12-devel-20251221-hostap_2_11-1307-g3ea5c0df5+ Copyright (c) 2003-2024, Jouni Malinen <[email protected]> and contributors dbland@NUC13-Linux2:~$ Supplicant EAP-FAST configuration: network={ ssid="asus6e_5" proto=RSN key_mgmt=WPA-EAP bgscan="simple:5:-70:60" eap=FAST identity="bob_loblaw" anonymous_identity="FAST-123456789012" password="password" phase1="fast_provisioning=1" phase2="auth=MSCHAPV2" pac_file="/home/dbland/certs_nuc13/bob_loblaw.pac" } Background: Recent Ubuntu versions have forcibly disabled TLS 1.0 and TLS 1.1, and EAP-FAST support with TLS 1.2 was first introduced in FreeRADIUS 3.2.8. However, the FreeRADIUS package version bundled with Ubuntu 24.04 is version 3.2.5, and version 3.2.7 with Ubuntu 25.10. This unfortunately leaves a gap in EAP-FAST support. Until a newer FreeRADIUS package is available on Ubuntu, compiling the 3.2.8 source seems to be the only option in order to support BOTH TLS 1.3 with EAP-PEAP and TLS 1.2 with EAP-FAST. Any further troubleshooting suggestions? From reading the mailing list archives, I've seen this EAP-FAST issue pop up a few times in the past on earlier 3.0.x versions, but with no resolution. Best regards, Dennis Bland - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
freeradius_328_eap_peap_tls_12_ubuntu_2404_ok.txt
(text/plain, 93.5 KB)
~$ sudo radiusd -X FreeRADIUS Version 3.2.8 Copyright (C) 1999-2025 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT FreeRADIUS is developed, maintained, and supported by InkBridge Networks. For commercial support, please email [email protected] https://inkbridgenetworks.com/ Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/proxy_rate_limit including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/totp including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/etc/raddb/policy.d/rfc7542 including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/debug including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 delay_proxy_rejects = no status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } unlang { group_stop_return = no policy_stop_return = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client pal { ipaddr = 192.168.0.0/24 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 900 } } Shared secret for client localhost is short, and likely can be broken by an attacker. client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost_ipv6 is short, and likely can be broken by an attacker. Debugger not attached Configuration version: 5c25-1e41-96dc-e8f1 # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_detail # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_proxy_rate_limit # Loading module "proxy_rate_limit" from file /usr/local/etc/raddb/mods-enabled/proxy_rate_limit proxy_rate_limit { max_entries = 2048 idle_timeout = 10 num_subtables = 256 window = 1 } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_totp # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp totp { time_step = 30 otp_length = 6 lookback_steps = 1 lookback_interval = 30 lookforward_steps = 0 } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no tmpdir = "/tmp/radiusd" client = "/usr/bin/openssl verify -CAfile /etc/freeradius/3.0/certs/ca.pem %{TLS-Client-Cert-Filename}" } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_fast fast { tls = "tls-common" default_eap_type = "mschapv2" virtual_server = "inner-tunnel" cipher_list = "ALL:!EXPORT:!eNULL:!SSLv2:@SECLEVEL=0" require_client_cert = no pac_lifetime = 315576000 authority_identity = "1234" pac_opaque_key = "0123456789abcdef0123456789ABCDEF" copy_request_to_tunnel = no use_tunneled_reply = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa # Instantiating module "proxy_rate_limit" from file /usr/local/etc/raddb/mods-enabled/proxy_rate_limit # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "totp" from file /usr/local/etc/raddb/mods-enabled/totp # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 900 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 40468 Listening on proxy address :: port 49449 Ready to process requests (0) Received Access-Request Id 88 from 192.168.0.45:50430 to 192.168.0.94:1812 length 222 (0) User-Name = "bob_loblaw" (0) NAS-IP-Address = 192.168.0.45 (0) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "A0-B3-39-64-69-23" (0) Connect-Info = "CONNECT 24Mbps 802.11a" (0) Acct-Session-Id = "FFD0437394F4DB53" (0) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x0294000f01626f625f6c6f626c6177 (0) Message-Authenticator = 0x4a8f56cbb59576cd2f6fb68756d32923 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 148 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Using default_eap_type = PEAP (0) eap: Calling submodule eap_peap to process data (0) eap_peap: (TLS) PEAP -Initiating new session (0) eap: Sending EAP Request (code 1) ID 149 length 6 (0) eap: EAP session adding &reply:State = 0x7f0561dd7f907822 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 984 (0) Sent Access-Challenge Id 88 from 192.168.0.94:1812 to 192.168.0.45:50430 length 64 (0) EAP-Message = 0x019500061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x7f0561dd7f9078226908638262d2a043 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 89 from 192.168.0.45:50430 to 192.168.0.94:1812 length 494 (1) User-Name = "bob_loblaw" (1) NAS-IP-Address = 192.168.0.45 (1) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "A0-B3-39-64-69-23" (1) Connect-Info = "CONNECT 24Mbps 802.11a" (1) Acct-Session-Id = "FFD0437394F4DB53" (1) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 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 (1) State = 0x7f0561dd7f9078226908638262d2a043 (1) Message-Authenticator = 0xf8a98431695d10aed9ca00e4bf476f5c (1) Restoring &session-state (1) &session-state:Framed-MTU = 984 (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 149 length 267 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Removing EAP session with state 0x7f0561dd7f907822 (1) eap: Previous EAP request found for state 0x7f0561dd7f907822, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: (TLS) EAP Peer says that the final record size will be 257 bytes (1) eap_peap: (TLS) EAP Got all data (257 bytes) (1) eap_peap: (TLS) PEAP - Handshake state - before SSL initialization (1) eap_peap: (TLS) PEAP - Handshake state - Server before SSL initialization (1) eap_peap: (TLS) PEAP - Handshake state - Server before SSL initialization (1) eap_peap: (TLS) PEAP - recv TLS 1.3 Handshake, ClientHello (1) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read client hello (1) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, ServerHello (1) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write server hello (1) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, Certificate (1) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write certificate (1) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange (1) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write key exchange (1) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone (1) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write server done (1) eap_peap: (TLS) PEAP - Server : Need to read more data: SSLv3/TLS write server done (1) eap_peap: (TLS) PEAP - In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 150 length 994 (1) eap: EAP session adding &reply:State = 0x7f0561dd7e937822 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 984 (1) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 89 from 192.168.0.94:1812 to 192.168.0.45:50430 length 1058 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x7f0561dd7e9378226908638262d2a043 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 90 from 192.168.0.45:50430 to 192.168.0.94:1812 length 231 (2) User-Name = "bob_loblaw" (2) NAS-IP-Address = 192.168.0.45 (2) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "A0-B3-39-64-69-23" (2) Connect-Info = "CONNECT 24Mbps 802.11a" (2) Acct-Session-Id = "FFD0437394F4DB53" (2) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x029600061900 (2) State = 0x7f0561dd7e9378226908638262d2a043 (2) Message-Authenticator = 0xa21405ca3b4184505280e741c281da93 (2) Restoring &session-state (2) &session-state:Framed-MTU = 984 (2) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 150 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Removing EAP session with state 0x7f0561dd7e937822 (2) eap: Previous EAP request found for state 0x7f0561dd7e937822, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 151 length 990 (2) eap: EAP session adding &reply:State = 0x7f0561dd7d927822 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 984 (2) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 90 from 192.168.0.94:1812 to 192.168.0.45:50430 length 1054 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x7f0561dd7d9278226908638262d2a043 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 91 from 192.168.0.45:50430 to 192.168.0.94:1812 length 231 (3) User-Name = "bob_loblaw" (3) NAS-IP-Address = 192.168.0.45 (3) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "A0-B3-39-64-69-23" (3) Connect-Info = "CONNECT 24Mbps 802.11a" (3) Acct-Session-Id = "FFD0437394F4DB53" (3) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x029700061900 (3) State = 0x7f0561dd7d9278226908638262d2a043 (3) Message-Authenticator = 0x75c256b55d7fe59efa05c9e3677be454 (3) Restoring &session-state (3) &session-state:Framed-MTU = 984 (3) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 151 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Removing EAP session with state 0x7f0561dd7d927822 (3) eap: Previous EAP request found for state 0x7f0561dd7d927822, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 152 length 731 (3) eap: EAP session adding &reply:State = 0x7f0561dd7c9d7822 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 984 (3) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 91 from 192.168.0.94:1812 to 192.168.0.45:50430 length 793 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x7f0561dd7c9d78226908638262d2a043 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 92 from 192.168.0.45:50430 to 192.168.0.94:1812 length 328 (4) User-Name = "bob_loblaw" (4) NAS-IP-Address = 192.168.0.45 (4) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "A0-B3-39-64-69-23" (4) Connect-Info = "CONNECT 24Mbps 802.11a" (4) Acct-Session-Id = "FFD0437394F4DB53" (4) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x0298006719800000005d16030300251000002120f39c97e98d2ab48d0579d2e49cb3b16e932b3aa367cdac2f36e54947b00488661403030001011603030028d4a7f63a1a9606bca60550c694f32b631dc14e0cde5d129b55c6fa6b87a2ca43f6457bfbe83290be (4) State = 0x7f0561dd7c9d78226908638262d2a043 (4) Message-Authenticator = 0xd03f64e487983dfc5b860acc7e0be665 (4) Restoring &session-state (4) &session-state:Framed-MTU = 984 (4) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 152 length 103 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Removing EAP session with state 0x7f0561dd7c9d7822 (4) eap: Previous EAP request found for state 0x7f0561dd7c9d7822, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: (TLS) EAP Peer says that the final record size will be 93 bytes (4) eap_peap: (TLS) EAP Got all data (93 bytes) (4) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write server done (4) eap_peap: (TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange (4) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read client key exchange (4) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read change cipher spec (4) eap_peap: (TLS) PEAP - recv TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read finished (4) eap_peap: (TLS) PEAP - send TLS 1.2 ChangeCipherSpec (4) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write change cipher spec (4) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write finished (4) eap_peap: (TLS) PEAP - Handshake state - SSL negotiation finished successfully (4) eap_peap: (TLS) PEAP - Connection Established (4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_peap: TLS-Session-Version = "TLS 1.2" (4) eap: Sending EAP Request (code 1) ID 153 length 57 (4) eap: EAP session adding &reply:State = 0x7f0561dd7b9c7822 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 984 (4) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 92 from 192.168.0.94:1812 to 192.168.0.45:50430 length 115 (4) EAP-Message = 0x01990039190014030300010116030300282e2b636f62316a4a917b58c46db851a63e7f80e51d729f07c9e6d39ea6d3422f2e62d37cc3641b69 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x7f0561dd7b9c78226908638262d2a043 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 93 from 192.168.0.45:50430 to 192.168.0.94:1812 length 231 (5) User-Name = "bob_loblaw" (5) NAS-IP-Address = 192.168.0.45 (5) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "A0-B3-39-64-69-23" (5) Connect-Info = "CONNECT 24Mbps 802.11a" (5) Acct-Session-Id = "FFD0437394F4DB53" (5) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x029900061900 (5) State = 0x7f0561dd7b9c78226908638262d2a043 (5) Message-Authenticator = 0x2476a314db00b6287b0bb39e1d2b833f (5) Restoring &session-state (5) &session-state:Framed-MTU = 984 (5) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 153 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Removing EAP session with state 0x7f0561dd7b9c7822 (5) eap: Previous EAP request found for state 0x7f0561dd7b9c7822, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 154 length 40 (5) eap: EAP session adding &reply:State = 0x7f0561dd7a9f7822 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 984 (5) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 93 from 192.168.0.94:1812 to 192.168.0.45:50430 length 98 (5) EAP-Message = 0x019a00281900170303001d2e2b636f62316a4b4c136730d7aef943329e5bec4a832be9023ca5ad67 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x7f0561dd7a9f78226908638262d2a043 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 94 from 192.168.0.45:50430 to 192.168.0.94:1812 length 271 (6) User-Name = "bob_loblaw" (6) NAS-IP-Address = 192.168.0.45 (6) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "A0-B3-39-64-69-23" (6) Connect-Info = "CONNECT 24Mbps 802.11a" (6) Acct-Session-Id = "FFD0437394F4DB53" (6) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x029a002e19001703030023d4a7f63a1a9606bdb439a99813e68130472f59fa6a3e0c99aaaf30cde1c347ca513b9f (6) State = 0x7f0561dd7a9f78226908638262d2a043 (6) Message-Authenticator = 0x68a2f486e7bc5467dc3069c58dba9f3c (6) Restoring &session-state (6) &session-state:Framed-MTU = 984 (6) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 154 length 46 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Removing EAP session with state 0x7f0561dd7a9f7822 (6) eap: Previous EAP request found for state 0x7f0561dd7a9f7822, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: (TLS) EAP Done initial handshake (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - bob_loblaw (6) eap_peap: Got inner identity 'bob_loblaw' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x029a000f01626f625f6c6f626c6177 (6) eap_peap: Setting User-Name to bob_loblaw (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x029a000f01626f625f6c6f626c6177 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "bob_loblaw" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x029a000f01626f625f6c6f626c6177 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "bob_loblaw" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 154 length 15 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Found &control:EAP-Type = MSCHAPv2 (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 155 length 42 (6) eap: EAP session adding &reply:State = 0x68e0f948687be313 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x019b002a1a019b00251066b16fd6c3a70aef6cfe6e3e294945b6667265657261646975732d332e322e38 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x68e0f948687be313f1a4fbc5fa9adf8c (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x019b002a1a019b00251066b16fd6c3a70aef6cfe6e3e294945b6667265657261646975732d332e322e38 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x68e0f948687be313f1a4fbc5fa9adf8c (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x019b002a1a019b00251066b16fd6c3a70aef6cfe6e3e294945b6667265657261646975732d332e322e38 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x68e0f948687be313f1a4fbc5fa9adf8c (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 155 length 73 (6) eap: EAP session adding &reply:State = 0x7f0561dd799e7822 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 984 (6) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 94 from 192.168.0.94:1812 to 192.168.0.45:50430 length 131 (6) EAP-Message = 0x019b00491900170303003e2e2b636f62316a4c4582c5c2a121d745c4f898f5f12645716bd597d09bca86550f25ae094fc2b084d4565234600e0de266413c6ac4911e9ea9dfba99343e (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7f0561dd799e78226908638262d2a043 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 95 from 192.168.0.45:50430 to 192.168.0.94:1812 length 325 (7) User-Name = "bob_loblaw" (7) NAS-IP-Address = 192.168.0.45 (7) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "A0-B3-39-64-69-23" (7) Connect-Info = "CONNECT 24Mbps 802.11a" (7) Acct-Session-Id = "FFD0437394F4DB53" (7) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x029b006419001703030059d4a7f63a1a9606be7b592a8fd20bf010c5a48b4f81f4d9d6c866c0f00182eb2dec16553c803c8d55c22675503306e90fa8111ee9308941675542ff2dc7e3fde057b95dee39bf41cfc04e37aedb6383b21a65977c9a25f0c259 (7) State = 0x7f0561dd799e78226908638262d2a043 (7) Message-Authenticator = 0x7ad31a1eec516dbb5611dd354b1a19fc (7) Restoring &session-state (7) &session-state:Framed-MTU = 984 (7) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 155 length 100 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Removing EAP session with state 0x7f0561dd799e7822 (7) eap: Previous EAP request found for state 0x7f0561dd799e7822, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: (TLS) EAP Done initial handshake (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x029b00451a029b00403120c05d840be6163ef8442d5ae95e0b20000000000000000052e4a1eae0609cfd38a146db6020bbea637e76569849d94300626f625f6c6f626c6177 (7) eap_peap: Setting User-Name to bob_loblaw (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x029b00451a029b00403120c05d840be6163ef8442d5ae95e0b20000000000000000052e4a1eae0609cfd38a146db6020bbea637e76569849d94300626f625f6c6f626c6177 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "bob_loblaw" (7) eap_peap: State = 0x68e0f948687be313f1a4fbc5fa9adf8c (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x029b00451a029b00403120c05d840be6163ef8442d5ae95e0b20000000000000000052e4a1eae0609cfd38a146db6020bbea637e76569849d94300626f625f6c6f626c6177 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "bob_loblaw" (7) State = 0x68e0f948687be313f1a4fbc5fa9adf8c (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 155 length 69 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry bob_loblaw at line 1 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Removing EAP session with state 0x68e0f948687be313 (7) eap: Previous EAP request found for state 0x68e0f948687be313, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Creating challenge hash with username: bob_loblaw (7) mschap: Client is using MS-CHAPv2 (7) mschap: Adding MS-CHAPv2 MPPE keys (7) eap_mschapv2: [mschap] = ok (7) eap_mschapv2: } # authenticate = ok (7) eap_mschapv2: MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 156 length 51 (7) eap: EAP session adding &reply:State = 0x68e0f948697ce313 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x019c00331a039b002e533d43363839314436304434354442384343314539374433324634373837413045323533333846303743 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x68e0f948697ce313f1a4fbc5fa9adf8c (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x019c00331a039b002e533d43363839314436304434354442384343314539374433324634373837413045323533333846303743 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x68e0f948697ce313f1a4fbc5fa9adf8c (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x019c00331a039b002e533d43363839314436304434354442384343314539374433324634373837413045323533333846303743 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x68e0f948697ce313f1a4fbc5fa9adf8c (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 156 length 82 (7) eap: EAP session adding &reply:State = 0x7f0561dd78997822 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 984 (7) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (7) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (7) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (7) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (7) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 95 from 192.168.0.94:1812 to 192.168.0.45:50430 length 140 (7) EAP-Message = 0x019c0052190017030300472e2b636f62316a4d1b453f25e86e09d982d09e061bff8b195f63ff44d9b863ffb9f3778b25ba84c877213e0c05f64eab6913c3f2333f68f016304c70728bd6fa220e3c6a8ff7ac (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x7f0561dd789978226908638262d2a043 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 96 from 192.168.0.45:50430 to 192.168.0.94:1812 length 262 (8) User-Name = "bob_loblaw" (8) NAS-IP-Address = 192.168.0.45 (8) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Calling-Station-Id = "A0-B3-39-64-69-23" (8) Connect-Info = "CONNECT 24Mbps 802.11a" (8) Acct-Session-Id = "FFD0437394F4DB53" (8) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) EAP-Message = 0x029c00251900170303001ad4a7f63a1a9606bf21bbed1a4194cc2a66bd864165e27584f916 (8) State = 0x7f0561dd789978226908638262d2a043 (8) Message-Authenticator = 0xc0faf2c8ea300832dc8fd71c5733f529 (8) Restoring &session-state (8) &session-state:Framed-MTU = 984 (8) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (8) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 156 length 37 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Removing EAP session with state 0x7f0561dd78997822 (8) eap: Previous EAP request found for state 0x7f0561dd78997822, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: (TLS) EAP Done initial handshake (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x029c00061a03 (8) eap_peap: Setting User-Name to bob_loblaw (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x029c00061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "bob_loblaw" (8) eap_peap: State = 0x68e0f948697ce313f1a4fbc5fa9adf8c (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x029c00061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "bob_loblaw" (8) State = 0x68e0f948697ce313f1a4fbc5fa9adf8c (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 156 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: users: Matched entry bob_loblaw at line 1 (8) [files] = ok (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Removing EAP session with state 0x68e0f948697ce313 (8) eap: Previous EAP request found for state 0x68e0f948697ce313, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 156 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (8) post-auth { (8) if (0) { (8) if (0) -> FALSE (8) } # post-auth = noop (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-MPPE-Encryption-Policy = Encryption-Allowed (8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) MS-MPPE-Send-Key = 0x5eec6133eec8a85b992a5166ee427747 (8) MS-MPPE-Recv-Key = 0x5f9374a040a79b2bdb88be3431dc3d68 (8) EAP-Message = 0x039c0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "bob_loblaw" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x5eec6133eec8a85b992a5166ee427747 (8) eap_peap: MS-MPPE-Recv-Key = 0x5f9374a040a79b2bdb88be3431dc3d68 (8) eap_peap: EAP-Message = 0x039c0004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "bob_loblaw" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x5eec6133eec8a85b992a5166ee427747 (8) eap_peap: MS-MPPE-Recv-Key = 0x5f9374a040a79b2bdb88be3431dc3d68 (8) eap_peap: EAP-Message = 0x039c0004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "bob_loblaw" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap: Sending EAP Request (code 1) ID 157 length 46 (8) eap: EAP session adding &reply:State = 0x7f0561dd77987822 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Framed-MTU = 984 (8) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (8) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (8) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (8) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (8) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (8) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) TLS-Session-Version = "TLS 1.2" (8) Sent Access-Challenge Id 96 from 192.168.0.94:1812 to 192.168.0.45:50430 length 104 (8) EAP-Message = 0x019d002e190017030300232e2b636f62316a4e4b01bd95e86a84edca29d720f1f252585d4ee5326c88928a51dcef (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x7f0561dd779878226908638262d2a043 (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 97 from 192.168.0.45:50430 to 192.168.0.94:1812 length 271 (9) User-Name = "bob_loblaw" (9) NAS-IP-Address = 192.168.0.45 (9) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Calling-Station-Id = "A0-B3-39-64-69-23" (9) Connect-Info = "CONNECT 24Mbps 802.11a" (9) Acct-Session-Id = "FFD0437394F4DB53" (9) Acct-Multi-Session-Id = "9F68D2D452BFD86B" (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027073 (9) Framed-MTU = 1400 (9) EAP-Message = 0x029d002e19001703030023d4a7f63a1a9606c09c34aa06a0f39029d459f49b945040a472a222fa5c84f367db3aa3 (9) State = 0x7f0561dd779878226908638262d2a043 (9) Message-Authenticator = 0x8d32d9cc0e29593129b5670d68177c31 (9) Restoring &session-state (9) &session-state:Framed-MTU = 984 (9) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (9) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 157 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Removing EAP session with state 0x7f0561dd77987822 (9) eap: Previous EAP request found for state 0x7f0561dd77987822, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: (TLS) EAP Done initial handshake (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap: Sending EAP Success (code 3) ID 157 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (9) post-auth { (9) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (9) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (9) update { (9) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 984 (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - send TLS 1.2 Handshake, ServerHello' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - send TLS 1.2 Handshake, Certificate' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - recv TLS 1.2 Handshake, Finished' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - send TLS 1.2 ChangeCipherSpec' (9) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) PEAP - send TLS 1.2 Handshake, Finished' (9) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (9) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (9) } # update = noop (9) [exec] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) if (EAP-Key-Name && &reply:EAP-Session-Id) { (9) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (9) } # post-auth = noop (9) Sent Access-Accept Id 97 from 192.168.0.94:1812 to 192.168.0.45:50430 length 178 (9) MS-MPPE-Recv-Key = 0xd7ba7964a16101dc6cc30a306e594a58bf47b93f71bbdb3071eec3f849563a29 (9) MS-MPPE-Send-Key = 0xdae5c2e6bb463c96fcce441575215fce501fd76a704b784657cf97eaf96aefae (9) EAP-Message = 0x039d0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = "bob_loblaw" (9) Framed-MTU += 984 (9) Finished request Waking up in 2.0 seconds.
freeradius_328_eap_fast_tls_12_ubuntu_2404_failed.txt
(text/plain, 69 KB)
~$ sudo radiusd -X FreeRADIUS Version 3.2.8 Copyright (C) 1999-2025 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT FreeRADIUS is developed, maintained, and supported by InkBridge Networks. For commercial support, please email [email protected] https://inkbridgenetworks.com/ Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/proxy_rate_limit including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/totp including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/etc/raddb/policy.d/rfc7542 including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/debug including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 delay_proxy_rejects = no status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } unlang { group_stop_return = no policy_stop_return = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client pal { ipaddr = 192.168.0.0/24 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 900 } } Shared secret for client localhost is short, and likely can be broken by an attacker. client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost_ipv6 is short, and likely can be broken by an attacker. Debugger not attached Configuration version: 5c25-1e41-96dc-e8f1 # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_detail # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_proxy_rate_limit # Loading module "proxy_rate_limit" from file /usr/local/etc/raddb/mods-enabled/proxy_rate_limit proxy_rate_limit { max_entries = 2048 idle_timeout = 10 num_subtables = 256 window = 1 } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_totp # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp totp { time_step = 30 otp_length = 6 lookback_steps = 1 lookback_interval = 30 lookforward_steps = 0 } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no tmpdir = "/tmp/radiusd" client = "/usr/bin/openssl verify -CAfile /etc/freeradius/3.0/certs/ca.pem %{TLS-Client-Cert-Filename}" } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_fast fast { tls = "tls-common" default_eap_type = "mschapv2" virtual_server = "inner-tunnel" cipher_list = "ALL:!EXPORT:!eNULL:!SSLv2:@SECLEVEL=0" require_client_cert = no pac_lifetime = 315576000 authority_identity = "1234" pac_opaque_key = "0123456789abcdef0123456789ABCDEF" copy_request_to_tunnel = no use_tunneled_reply = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa # Instantiating module "proxy_rate_limit" from file /usr/local/etc/raddb/mods-enabled/proxy_rate_limit # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "totp" from file /usr/local/etc/raddb/mods-enabled/totp # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 900 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 33321 Listening on proxy address :: port 42212 Ready to process requests (0) Received Access-Request Id 81 from 192.168.0.45:50430 to 192.168.0.94:1812 length 236 (0) User-Name = "FAST-123456789012" (0) NAS-IP-Address = 192.168.0.45 (0) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "A0-B3-39-64-69-23" (0) Connect-Info = "CONNECT 24Mbps 802.11a" (0) Acct-Session-Id = "E0F39D3C45B4683E" (0) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02de001601464153542d313233343536373839303132 (0) Message-Authenticator = 0x9b84af02f189f28a00eede6eb3653eaf (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 222 length 22 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Using default_eap_type = PEAP (0) eap: Calling submodule eap_peap to process data (0) eap_peap: (TLS) PEAP -Initiating new session (0) eap: Sending EAP Request (code 1) ID 223 length 6 (0) eap: EAP session adding &reply:State = 0x8dbc67c78d637ef2 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 984 (0) Sent Access-Challenge Id 81 from 192.168.0.94:1812 to 192.168.0.45:50430 length 64 (0) EAP-Message = 0x01df00061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x8dbc67c78d637ef26f0d65fd646be2cc (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 82 from 192.168.0.45:50430 to 192.168.0.94:1812 length 238 (1) User-Name = "FAST-123456789012" (1) NAS-IP-Address = 192.168.0.45 (1) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "A0-B3-39-64-69-23" (1) Connect-Info = "CONNECT 24Mbps 802.11a" (1) Acct-Session-Id = "E0F39D3C45B4683E" (1) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x02df0006032b (1) State = 0x8dbc67c78d637ef26f0d65fd646be2cc (1) Message-Authenticator = 0xe71e222b66057775d1c7f6061d65be8b (1) Restoring &session-state (1) &session-state:Framed-MTU = 984 (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 223 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Removing EAP session with state 0x8dbc67c78d637ef2 (1) eap: Previous EAP request found for state 0x8dbc67c78d637ef2, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type FAST (43) (1) eap: Found compatible type in NAK - EAP-Type = FAST (1) eap: Calling submodule eap_fast to process data (1) eap_fast: (TLS) FAST -Initiating new session (1) eap_fast: Over-riding main cipher list with 'ALL:!EXPORT:!eNULL:!SSLv2:@SECLEVEL=0' (1) eap_fast: Setting security level to 0 to allow anonymous cipher suites (1) eap: Sending EAP Request (code 1) ID 224 length 26 (1) eap: EAP session adding &reply:State = 0x8dbc67c78c5c4cf2 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 984 (1) Sent Access-Challenge Id 82 from 192.168.0.94:1812 to 192.168.0.45:50430 length 84 (1) EAP-Message = 0x01e0001a2b210004001081dc9bdb52d04dc20036dbd8313ed055 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x8dbc67c78c5c4cf26f0d65fd646be2cc (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 83 from 192.168.0.45:50430 to 192.168.0.94:1812 length 352 (2) User-Name = "FAST-123456789012" (2) NAS-IP-Address = 192.168.0.45 (2) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "A0-B3-39-64-69-23" (2) Connect-Info = "CONNECT 24Mbps 802.11a" (2) Acct-Session-Id = "E0F39D3C45B4683E" (2) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x02e000782b01160301006d0100006903037e7412bd8f7ba6d8856caf27b0c2b176e6a3c706d19cc7fefe5dd447983a1f86000004003400ff0100003c0016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (2) State = 0x8dbc67c78c5c4cf26f0d65fd646be2cc (2) Message-Authenticator = 0x210d2ef6a7c8150cb5cd20d2b9efb6a7 (2) Restoring &session-state (2) &session-state:Framed-MTU = 984 (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 224 length 120 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Removing EAP session with state 0x8dbc67c78c5c4cf2 (2) eap: Previous EAP request found for state 0x8dbc67c78c5c4cf2, released from the list (2) eap: Peer sent packet with method EAP FAST (43) (2) eap: Calling submodule eap_fast to process data (2) eap_fast: Authenticate (2) eap_fast: (TLS) EAP Done initial handshake (2) eap_fast: (TLS) FAST - Handshake state - before SSL initialization (2) eap_fast: (TLS) FAST - Handshake state - Server before SSL initialization (2) eap_fast: (TLS) FAST - Handshake state - Server before SSL initialization (2) eap_fast: (TLS) FAST - recv TLS 1.3 Handshake, ClientHello (2) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS read client hello (2) eap_fast: (TLS) FAST - send TLS 1.2 Handshake, ServerHello (2) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS write server hello (2) eap_fast: (TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange (2) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS write key exchange (2) eap_fast: (TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone (2) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS write server done (2) eap_fast: (TLS) FAST - Server : Need to read more data: SSLv3/TLS write server done (2) eap_fast: (TLS) FAST - In Handshake Phase (2) eap: Sending EAP Request (code 1) ID 225 length 349 (2) eap: EAP session adding &reply:State = 0x8dbc67c78f5d4cf2 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 984 (2) TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 83 from 192.168.0.94:1812 to 192.168.0.45:50430 length 409 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x8dbc67c78f5d4cf26f0d65fd646be2cc (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 84 from 192.168.0.45:50430 to 192.168.0.94:1812 length 456 (3) User-Name = "FAST-123456789012" (3) NAS-IP-Address = 192.168.0.45 (3) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "A0-B3-39-64-69-23" (3) Connect-Info = "CONNECT 24Mbps 802.11a" (3) Acct-Session-Id = "E0F39D3C45B4683E" (3) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x02e100e02b01160303008610000082008034b11bc2c787ad432034cb33cca5f5dc79e1c7096b691d7a58de9c04ace9fdf99fd673718348b33be6cbb7abd520dc2af0f408c9214437619a3796c0fdbdcfa9747b9995715f638b81cb4507cea38b1557c334c0fd790d72bda1cb289a1f0a5c3aa8902d92797d682463f87e98164796fb18a0dd707f176d1d14e0e0e0043d7314030300010116030300441c4650b6223af641e58ede11c57b7da9fe33c4a0c554cb5f219b68310adf2ffd28d1266e5903ec87965a2cb4042bc1185d4fd0040df08d0d5d738cf7c9c2462ff5dbf09e (3) State = 0x8dbc67c78f5d4cf26f0d65fd646be2cc (3) Message-Authenticator = 0x6ddb9470ce2900636ab24dc7ef27a239 (3) Restoring &session-state (3) &session-state:Framed-MTU = 984 (3) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 225 length 224 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Removing EAP session with state 0x8dbc67c78f5d4cf2 (3) eap: Previous EAP request found for state 0x8dbc67c78f5d4cf2, released from the list (3) eap: Peer sent packet with method EAP FAST (43) (3) eap: Calling submodule eap_fast to process data (3) eap_fast: Authenticate (3) eap_fast: (TLS) EAP Done initial handshake (3) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS write server done (3) eap_fast: (TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange (3) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS read client key exchange (3) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS read change cipher spec (3) eap_fast: (TLS) FAST - recv TLS 1.2 Handshake, Finished (3) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS read finished (3) eap_fast: (TLS) FAST - send TLS 1.2 ChangeCipherSpec (3) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS write change cipher spec (3) eap_fast: (TLS) FAST - send TLS 1.2 Handshake, Finished (3) eap_fast: (TLS) FAST - Handshake state - Server SSLv3/TLS write finished (3) eap_fast: (TLS) FAST - Handshake state - SSL negotiation finished successfully (3) eap_fast: (TLS) FAST - Connection Established (3) eap_fast: TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (3) eap_fast: TLS-Session-Version = "TLS 1.2" (3) eap: Sending EAP Request (code 1) ID 226 length 85 (3) eap: EAP session adding &reply:State = 0x8dbc67c78e5e4cf2 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 984 (3) TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (3) TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange" (3) TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, Finished" (3) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 ChangeCipherSpec" (3) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, Finished" (3) TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (3) TLS-Session-Version = "TLS 1.2" (3) Sent Access-Challenge Id 84 from 192.168.0.94:1812 to 192.168.0.45:50430 length 143 (3) EAP-Message = 0x01e200552b011403030001011603030044c687939ec6a7a0f43963cd862dbec5236a0bbef9044009547491341bc2e33a83b769e659ac1420f8d31d16d3d299c23184e9abe6c7cb9d5fb78c04efd4bdaf27e5a51f2a (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x8dbc67c78e5e4cf26f0d65fd646be2cc (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 85 from 192.168.0.45:50430 to 192.168.0.94:1812 length 238 (4) User-Name = "FAST-123456789012" (4) NAS-IP-Address = 192.168.0.45 (4) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "A0-B3-39-64-69-23" (4) Connect-Info = "CONNECT 24Mbps 802.11a" (4) Acct-Session-Id = "E0F39D3C45B4683E" (4) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x02e200062b01 (4) State = 0x8dbc67c78e5e4cf26f0d65fd646be2cc (4) Message-Authenticator = 0x9fcc3ef52ee6cf6ae214b89dcf21e0d1 (4) Restoring &session-state (4) &session-state:Framed-MTU = 984 (4) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (4) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, Finished" (4) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 ChangeCipherSpec" (4) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, Finished" (4) &session-state:TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (4) &session-state:TLS-Session-Version = "TLS 1.2" (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 226 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Removing EAP session with state 0x8dbc67c78e5e4cf2 (4) eap: Previous EAP request found for state 0x8dbc67c78e5e4cf2, released from the list (4) eap: Peer sent packet with method EAP FAST (43) (4) eap: Calling submodule eap_fast to process data (4) eap_fast: Authenticate (4) eap_fast: (TLS) Peer ACKed our handshake fragment. handshake is finished (4) eap_fast: Session established. Proceeding to decode tunneled attributes (4) eap_fast: Using anonymous provisioning (4) eap_fast: Deriving EAP-FAST keys (4) eap_fast: OpenSSL: keyblock size: mac_key_len=20 enc_key_len=16 fixed_iv_len=16 (4) eap_fast: Sending EAP-Identity (4) eap_fast: Challenge (4) eap: Sending EAP Request (code 1) ID 227 length 63 (4) eap: EAP session adding &reply:State = 0x8dbc67c7895f4cf2 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 984 (4) TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 85 from 192.168.0.94:1812 to 192.168.0.45:50430 length 121 (4) EAP-Message = 0x01e3003f2b0117030300344642ada0aac71e10cc347f8cd19851bb485cf028e1a89dd476cedea6163fbb1f833a37a10e52b5c38732664eb3d5c20b63866cdb (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x8dbc67c7895f4cf26f0d65fd646be2cc (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 86 from 192.168.0.45:50430 to 192.168.0.94:1812 length 311 (5) User-Name = "FAST-123456789012" (5) NAS-IP-Address = 192.168.0.45 (5) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "A0-B3-39-64-69-23" (5) Connect-Info = "CONNECT 24Mbps 802.11a" (5) Acct-Session-Id = "E0F39D3C45B4683E" (5) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x02e3004f2b011703030044c2462cbcb98b65b630a78b7fb080642a4433de24444afd96a9c6e7ca1f82e23c89c8c0c600d53774a896c2fd71810d9749c67de5c065921ac3324964cdbabe2978d23f99 (5) State = 0x8dbc67c7895f4cf26f0d65fd646be2cc (5) Message-Authenticator = 0x9023e788148905c2bb39bf708f0c2514 (5) Restoring &session-state (5) &session-state:Framed-MTU = 984 (5) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 227 length 79 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Removing EAP session with state 0x8dbc67c7895f4cf2 (5) eap: Previous EAP request found for state 0x8dbc67c7895f4cf2, released from the list (5) eap: Peer sent packet with method EAP FAST (43) (5) eap: Calling submodule eap_fast to process data (5) eap_fast: Authenticate (5) eap_fast: (TLS) EAP Done initial handshake (5) eap_fast: Session established. Proceeding to decode tunneled attributes (5) eap_fast: Got Tunneled FAST TLVs (5) eap_fast: FreeRADIUS-EAP-FAST-EAP-Payload = 0x02e3000f01626f625f6c6f626c6177 (5) eap_fast: Processing received EAP Payload (5) eap_fast: Got tunneled request (5) eap_fast: EAP-Message = 0x02e3000f01626f625f6c6f626c6177 (5) eap_fast: Got tunneled identity of bob_loblaw (5) eap_fast: AUTHENTICATION (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02e3000f01626f625f6c6f626c6177 (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "bob_loblaw" (5) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 227 length 15 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Found &control:EAP-Type = MSCHAPv2 (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 228 length 42 (5) eap: EAP session adding &reply:State = 0xdce19ac7dc058060 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x01e4002a1a01e400251000000000000000000000000000000000667265657261646975732d332e322e38 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xdce19ac7dc058060924b98609966b5ea (5) eap_fast: Got tunneled Access-Challenge (5) eap_fast: Challenge (5) eap: Sending EAP Request (code 1) ID 228 length 95 (5) eap: EAP session adding &reply:State = 0x8dbc67c788584cf2 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 984 (5) TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 86 from 192.168.0.94:1812 to 192.168.0.45:50430 length 153 (5) EAP-Message = 0x01e4005f2b011703030054792c724c9255a126059b314f8b74e158f9a4de7427e956c6b74816ffc58874f3e3a5b9e931b33403cdb7b68aa94b90a39e2c9426ac7a737682eb2e3aaf7f309e4c4d453a2f3f6da26198692d4b1aec3736d2cadb (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x8dbc67c788584cf26f0d65fd646be2cc (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 87 from 192.168.0.45:50430 to 192.168.0.94:1812 length 359 (6) User-Name = "FAST-123456789012" (6) NAS-IP-Address = 192.168.0.45 (6) Called-Station-Id = "FC-34-97-2D-7C-24:krave_asus6e_5" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "A0-B3-39-64-69-23" (6) Connect-Info = "CONNECT 24Mbps 802.11a" (6) Acct-Session-Id = "E0F39D3C45B4683E" (6) Acct-Multi-Session-Id = "9958DA1E87FD69F5" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x02e4007f2b0117030300743a3006d7db977d7c94241ee8bc5edb63502d2ede1af7b1d271275d2b2f2e4df95625996c7f66dbfeef5329e9caa3d51afb62437a4c1f8938a1177af23073c7aef6dd36106319def2924fbffaddac6d4f87200f9fa936fe413a41f863c19fda4c017adb9958b19a12fe2494dfd065a2ac03963de7 (6) State = 0x8dbc67c788584cf26f0d65fd646be2cc (6) Message-Authenticator = 0xd0c387774fdfd453e525a18ccaccab9c (6) Restoring &session-state (6) &session-state:Framed-MTU = 984 (6) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) FAST - recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) FAST - send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ADH-AES128-SHA" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "FAST-123456789012", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 228 length 127 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Removing EAP session with state 0x8dbc67c788584cf2 (6) eap: Previous EAP request found for state 0x8dbc67c788584cf2, released from the list (6) eap: Peer sent packet with method EAP FAST (43) (6) eap: Calling submodule eap_fast to process data (6) eap_fast: Authenticate (6) eap_fast: (TLS) EAP Done initial handshake (6) eap_fast: Session established. Proceeding to decode tunneled attributes (6) eap_fast: Got Tunneled FAST TLVs (6) eap_fast: FreeRADIUS-EAP-FAST-EAP-Payload = 0x02e400451a02e4004031000000000000000000000000000000000000000000000000748596aa45dcd1b5a22f7aec21a0e705716632968c8c552a00626f625f6c6f626c6177 (6) eap_fast: Processing received EAP Payload (6) eap_fast: Got tunneled request (6) eap_fast: EAP-Message = 0x02e400451a02e4004031000000000000000000000000000000000000000000000000748596aa45dcd1b5a22f7aec21a0e705716632968c8c552a00626f625f6c6f626c6177 (6) eap_fast: AUTHENTICATION (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x02e400451a02e4004031000000000000000000000000000000000000000000000000748596aa45dcd1b5a22f7aec21a0e705716632968c8c552a00626f625f6c6f626c6177 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "bob_loblaw" (6) State = 0xdce19ac7dc058060924b98609966b5ea (6) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob_loblaw", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 228 length 69 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry bob_loblaw at line 1 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Removing EAP session with state 0xdce19ac7dc058060 (6) eap: Previous EAP request found for state 0xdce19ac7dc058060, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) eap_mschapv2: authenticate { (6) mschap: Found Cleartext-Password, hashing to create NT-Password (6) mschap: Overriding peer challenge (6) mschap: Creating challenge hash with username: bob_loblaw (6) mschap: Client is using MS-CHAPv2 (6) mschap: ERROR: MS-CHAP2-Response is incorrect (6) eap_mschapv2: [mschap] = reject (6) eap_mschapv2: } # authenticate = reject (6) eap: Sending EAP Failure (code 4) ID 228 length 4 (6) eap: Freeing handler (6) [eap] = reject (6) } # authenticate = reject (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> bob_loblaw (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) MS-CHAP-Error = "\344E=691 R=1 C=0fca5075fc182c45963743d21d8b85fc V=3 M=Authentication rejected" (6) EAP-Message = 0x04e40004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_fast: Got tunneled Access-Reject (6) eap_fast: Reject (6) eap: ERROR: Failed continuing EAP FAST (43) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 228 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> FAST-123456789012 (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 0.997396 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 87 from 192.168.0.94:1812 to 192.168.0.45:50430 length 44 (6) EAP-Message = 0x04e40004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds.