Re: Keyboard using event driver stops working when Lightgun attached

Thanks, I'll check out the logs.  I just did a quick check, and I have
/dev/input/event0 through /dev/input/event63

Seems like quite a few, but who knows.


On Wed,  5 Jan 2005 15:49:48 +0100, frollic <[email protected]> wrote:
> > I'm running advmame 0.89 on Novell Desktop Linux 9.0 (suse) with a
> > 2.6.10 kernel, and an act labs usb lightgun.  When the lightgun is not
> > plugged in, I'm able to use the event interface for the keyboard
> > driver, but when the lightgun is plugged in, it works fine w/ event
> > but the keyboard fails to work unless I switch the driver to raw.
> 
> I had this problem too, in my case it was caused by an insufficient number
> of /dev/eventXX devices in /dev (might be in a subdir of /dev too). The
> motherboards devices got assiged to most of the /dev/eventXX and the external
> stuff like joysticks wouldn't be detected because of this.
> 
> You could see this if you ran advancemame with logging switched on.
> 
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> ___
> Unsubscribe at https://lists.sourceforge.net/lists/listinfo/advancemame-users
>


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
___
Unsubscribe at https://lists.sourceforge.net/lists/listinfo/advancemame-users