☠ Buildbot (Sourceware): binutils-gdb-autoregen - failed 'autoregen.py' (failure) (master)

builder--- via Gdbadmin <[email protected]> Wed, 07 Jan 2026 18:54:35 +0000

Newsgroups	gmane.comp.gdb.admin,gmane.comp.gnu.binutils,gmane.comp.gdb.testing
Message-ID	<[email protected]>

A failed build has been detected on builder binutils-gdb-autoregen while building binutils-gdb.

Full details are available at:
    https://builder.sourceware.org/buildbot/#/builders/270/builds/8324

Build state: failed 'autoregen.py' (failure)
Revision: f99be06dbd698fdfd6c6b8f22128c187057b6d91
Worker: bbo1-2
Build Reason: (unknown)
Blamelist: Aditya Vidyadhar Kamath <[email protected]>, Andrew Burgess <[email protected]>, Ezra Sitorus <[email protected]>, GDB Administrator <[email protected]>, Indu Bhagat <[email protected]>, Nick Clifton <[email protected]>, Simon Marchi <[email protected]>, Simon Marchi <[email protected]>, Srinath Parvathaneni <[email protected]>, Tom Tromey <[email protected]>, Tom Tromey <[email protected]>, Tom de Vries <[email protected]>

Steps:

- 0: worker_preparation ( success )

- 1: git checkout ( success )
    Logs:
        - stdio: https://builder.sourceware.org/buildbot/#/builders/270/builds/8324/steps/1/logs/stdio

- 2: autoregen.py ( failure )
    Logs:
        - stdio: https://builder.sourceware.org/buildbot/#/builders/270/builds/8324/steps/2/logs/stdio

git checkout.stdio (text/plain, 10.4 KB)

hgit --version
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'--version']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
ogit version 2.47.3
hprogram finished with exit code 0
helapsedTime=0.009857
hprogram finished with exit code 2
hstat: No such file or directory: /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/.buildbot-patched
hprogram finished with exit code 0
hgit clean -f -f -d -x
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'clean', b'-f', b'-f', b'-d', b'-x']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
oRemoving autom4te.cache/
oRemoving bfd/autom4te.cache/
oRemoving bfd/config.in~
oRemoving binutils/autom4te.cache/
oRemoving binutils/config.in~
oRemoving etc/autom4te.cache/
oRemoving gas/autom4te.cache/
oRemoving gas/config.in~
oRemoving gdb/autom4te.cache/
oRemoving gdb/config.in~
oRemoving gdb/testsuite/autom4te.cache/
oRemoving gdbserver/autom4te.cache/
oRemoving gdbserver/config.in~
oRemoving gdbsupport/autom4te.cache/
oRemoving gdbsupport/config.in~
oRemoving gnulib/autom4te.cache/
oRemoving gnulib/config.in~
oRemoving gold/autom4te.cache/
oRemoving gold/config.in~
oRemoving gprof/autom4te.cache/
oRemoving gprof/gconfig.in~
oRemoving gprofng/autom4te.cache/
oRemoving gprofng/common/config.h.in~
oRemoving gprofng/common/lib-config.h.in~
oRemoving gprofng/libcollector/autom4te.cache/
oRemoving ld/autom4te.cache/
oRemoving ld/config.in~
oRemoving libbacktrace/autom4te.cache/
oRemoving libbacktrace/config.h.in~
oRemoving libctf/autom4te.cache/
oRemoving libctf/config.h.in~
oRemoving libdecnumber/autom4te.cache/
oRemoving libdecnumber/config.in~
oRemoving libiberty/autom4te.cache/
hprogram finished with exit code 0
helapsedTime=0.097080
hgit cat-file -e f99be06dbd698fdfd6c6b8f22128c187057b6d91
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'cat-file', b'-e', b'f99be06dbd698fdfd6c6b8f22128c187057b6d91']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
hprogram finished with exit code 1
helapsedTime=0.012761
hgit fetch -f -t https://sourceware.org/git/binutils-gdb.git master --progress
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'fetch', b'-f', b'-t', b'https://sourceware.org/git/binutils-gdb.git', b'master', b'--progress']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
eremote: Enumerating objects: 29, done.        
eremote: Counting objects:   3% (1/29)        
eremote: Counting objects:   6% (2/29)        
eremote: Counting objects:  10% (3/29)        
eremote: Counting objects:  13% (4/29)        
eremote: Counting objects:  17% (5/29)        
eremote: Counting objects:  20% (6/29)        
eremote: Counting objects:  24% (7/29)        
eremote: Counting objects:  27% (8/29)        
eremote: Counting objects:  31% (9/29)        
eremote: Counting objects:  34% (10/29)        
eremote: Counting objects:  37% (11/29)        
eremote: Counting objects:  41% (12/29)        
eremote: Counting objects:  44% (13/29)        
eremote: Counting objects:  48% (14/29)        
eremote: Counting objects:  51% (15/29)        
eremote: Counting objects:  55% (16/29)        
eremote: Counting objects:  58% (17/29)        
eremote: Counting objects:  62% (18/29)        
eremote: Counting objects:  65% (19/29)        
eremote: Counting objects:  68% (20/29)        
eremote: Counting objects:  72% (21/29)        
eremote: Counting objects:  75% (22/29)        
eremote: Counting objects:  79% (23/29)        
eremote: Counting objects:  82% (24/29)        
eremote: Counting objects:  86% (25/29)        
eremote: Counting objects:  89% (26/29)        
eremote: Counting objects:  93% (27/29)        
eremote: Counting objects:  96% (28/29)        
eremote: Counting objects: 100% (29/29)        
eremote: Counting objects: 100% (29/29), done.        
eremote: Compressing objects:   5% (1/19)        
eremote: Compressing objects:  10% (2/19)        
eremote: Compressing objects:  15% (3/19)        
eremote: Compressing objects:  21% (4/19)        
eremote: Compressing objects:  26% (5/19)        
eremote: Compressing objects:  31% (6/19)        
eremote: Compressing objects:  36% (7/19)        
eremote: Compressing objects:  42% (8/19)        
eremote: Compressing objects:  47% (9/19)        
eremote: Compressing objects:  52% (10/19)        
eremote: Compressing objects:  57% (11/19)        
eremote: Compressing objects:  63% (12/19)        
eremote: Compressing objects:  68% (13/19)        
eremote: Compressing objects:  73% (14/19)        
eremote: Compressing objects:  78% (15/19)        
eremote: Compressing objects:  84% (16/19)        
eremote: Compressing objects:  89% (17/19)        
eremote: Compressing objects:  94% (18/19)        
eremote: Compressing objects: 100% (19/19)        
eremote: Compressing objects: 100% (19/19), done.        
eremote: Total 19 (delta 16), reused 0 (delta 0), pack-reused 0        
eFrom https://sourceware.org/git/binutils-gdb
e * branch                    master     -> FETCH_HEAD
hprogram finished with exit code 0
helapsedTime=1.871159
hgit checkout -f f99be06dbd698fdfd6c6b8f22128c187057b6d91
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'checkout', b'-f', b'f99be06dbd698fdfd6c6b8f22128c187057b6d91']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
eNote: switching to 'f99be06dbd698fdfd6c6b8f22128c187057b6d91'.
e
eYou are in 'detached HEAD' state. You can look around, make experimental
echanges and commit them, and you can discard any commits you make in this
estate without impacting any branches by switching back to a branch.
e
eIf you want to create a new branch to retain commits you create, you may
edo so (now or later) by using -c with the switch command. Example:
e
e  git switch -c <new-branch-name>
e
eOr undo this operation with:
e
e  git switch -
e
eTurn off this advice by setting config variable advice.detachedHead to false
e
eHEAD is now at f99be06dbd6 Mention gdb thread ID in thread messages
hprogram finished with exit code 0
helapsedTime=0.194846
hgit checkout -B master
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'checkout', b'-B', b'master']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
eSwitched to and reset branch 'master'
oYour branch is ahead of 'origin/master' by 8057 commits.
o  (use "git push" to publish your local commits)
hprogram finished with exit code 0
helapsedTime=0.290663
hgit rev-parse HEAD
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'rev-parse', b'HEAD']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
of99be06dbd698fdfd6c6b8f22128c187057b6d91
hprogram finished with exit code 0
helapsedTime=0.010563
hgit describe --always --tags HEAD
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: [b'git', b'describe', b'--always', b'--tags', b'HEAD']
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
ogdb-17-branchpoint-1383-gf99be06dbd6
hprogram finished with exit code 0
helapsedTime=0.919832

autoregen.py.stdio (text/plain, 6.7 KB)

hautoregen.py
h in dir /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build (timeout 1200 secs)
h watching logfiles {}
h argv: b'autoregen.py'
h environment:
h  BUILDMASTER=builder.sourceware.org
h  BUILDMASTER_PORT=9989
h  CCACHE_DIR=/home/builder/shared/autotools/ccache
h  CCACHE_LIBDIR=/usr/lib/ccache
h  HOME=/home/builder
h  HOSTNAME=709ca96a9f30
h  IMAGE_NAME=autotools
h  LC_CTYPE=C.UTF-8
h  PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
h  PWD=/home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
h  WORKERNAME=bbo1-2
h using PTY: False
o+ autoconf-2.69 --version
oautoconf (GNU Autoconf) 2.69
oCopyright (C) 2012 Free Software Foundation, Inc.
oLicense GPLv3+/Autoconf: GNU GPL version 3 or later
o<http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html>
oThis is free software: you are free to change and redistribute it.
oThere is NO WARRANTY, to the extent permitted by law.
o
oWritten by David J. MacKenzie and Akim Demaille.
o+ automake-1.15.1 --version
oautomake (GNU automake) 1.15.1
oCopyright (C) 2017 Free Software Foundation, Inc.
oLicense GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
oThis is free software: you are free to change and redistribute it.
oThere is NO WARRANTY, to the extent permitted by law.
o
oWritten by Tom Tromey <[email protected]>
o       and Alexandre Duret-Lutz <[email protected]>.
o+ aclocal-1.15.1 --version
oaclocal (GNU automake) 1.15.1
oCopyright (C) 2017 Free Software Foundation, Inc.
oLicense GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
oThis is free software: you are free to change and redistribute it.
oThere is NO WARRANTY, to the extent permitted by law.
o
oWritten by Tom Tromey <[email protected]>
o       and Alexandre Duret-Lutz <[email protected]>.
o+ autoheader-2.69 --version
oautoheader (GNU Autoconf) 2.69
oCopyright (C) 2012 Free Software Foundation, Inc.
oLicense GPLv3+/Autoconf: GNU GPL version 3 or later
o<http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html>
oThis is free software: you are free to change and redistribute it.
oThere is NO WARRANTY, to the extent permitted by law.
o
oWritten by Roland McGrath and Akim Demaille.
oExtra environment: {'WANT_AUTOCONF': '2.69', 'WANT_AUTOMAKE': '1.15.1', 'AUTOCONF': 'autoconf-2.69', 'ACLOCAL': 'aclocal-1.15.1', 'AUTOMAKE': 'automake-1.15.1', 'AUTOGEN': 'autogen'}
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
o+ autogen Makefile.def
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build
o+ autoconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/bfd
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/binutils
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/etc
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gas
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gdb
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gdb/testsuite
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gdbserver
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gdbsupport
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gnulib
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gold
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gprof
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gprofng
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/gprofng/libcollector
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/ld
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/libbacktrace
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/libctf
o+ autoreconf-2.69 -f
eautoreconf-2.69: configure.ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/libdecnumber
o+ autoreconf-2.69 -f
oEntering directory /home/builder/shared/bbo1-2/worker/binutils-gdb-autoregen/build/libiberty
o+ autoreconf-2.69 -f
econfigure.ac:161: error: m4_defn: undefined macro: GCC_AC_FUNC_MMAP
e../config/no-executables.m4:21: GCC_NO_EXECUTABLES is expanded from...
econfigure.ac:161: the top level
eautom4te-2.69: /usr/bin/m4 failed with exit status: 1
econfigure.ac:161: error: m4_defn: undefined macro: GCC_AC_FUNC_MMAP
e../config/no-executables.m4:21: GCC_NO_EXECUTABLES is expanded from...
econfigure.ac:161: the top level
eautom4te-2.69: /usr/bin/m4 failed with exit status: 1
eautoreconf-2.69: autoconf-2.69 failed with exit status: 1
eTraceback (most recent call last):
e  File "/usr/local/bin/autoregen.py", line 146, in <module>
e    regenerate_with_autoreconf()
e    ~~~~~~~~~~~~~~~~~~~~~~~~~~^^
e  File "/usr/local/bin/autoregen.py", line 76, in regenerate_with_autoreconf
e    run_shell(f"{AUTORECONF_BIN} -f")
e    ~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^
e  File "/usr/local/bin/autoregen.py", line 72, in run_shell
e    res.check_returncode()
e    ~~~~~~~~~~~~~~~~~~~~^^
e  File "/usr/lib/python3.13/subprocess.py", line 508, in check_returncode
e    raise CalledProcessError(self.returncode, self.args, self.stdout,
e                             self.stderr)
esubprocess.CalledProcessError: Command 'autoreconf-2.69 -f' returned non-zero exit status 1.
hprogram finished with exit code 1
helapsedTime=127.172304