[binutils-gdb] gdb, amd-dbgapi-target: use pulongest to print id handles
Tankut Baris Aktemur via Gdb-cvs <[email protected]> Fri, 3 Jul 2026 12:33:11 +0000 (GMT)
| Newsgroups | gmane.comp.gdb.cvs |
|---|---|
| Message-ID | <[email protected]> |
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ddebf91709252da30a53ce7122e9ce44dc702793 commit ddebf91709252da30a53ce7122e9ce44dc702793 Author: Tankut Baris Aktemur <[email protected]> Date: Fri Jul 3 07:32:10 2026 -0500 gdb, amd-dbgapi-target: use pulongest to print id handles In amd-dbgapi-target, there are a number of cases where identifier handles that are obtained from dbgapi are being printed. Those handles are defined to have type uint64_t. Use pulongest when printing them for improved portability. In one case, `ptid.tid ()` was being printed for the wave id. Change this to use `wave_id.handle` for consistency with the other cases. Approved-by: Lancelot Six <[email protected]> (amdgpu) Diff: --- gdb/amd-dbgapi-target.c | 87 +++++++++++++++++++++++++------------------------ 1 file changed, 45 insertions(+), 42 deletions(-) diff --git a/gdb/amd-dbgapi-target.c b/gdb/amd-dbgapi-target.c index d0424044e0c..caae9a98501 100644 --- a/gdb/amd-dbgapi-target.c +++ b/gdb/amd-dbgapi-target.c @@ -392,18 +392,18 @@ wave_coordinates::to_string () const std::string str = "AMDGPU Wave"; str += (agent_id != AMD_DBGAPI_AGENT_NONE - ? string_printf (" %ld", agent_id.handle) + ? string_printf (" %s", pulongest (agent_id.handle)) : " ?"); str += (queue_id != AMD_DBGAPI_QUEUE_NONE - ? string_printf (":%ld", queue_id.handle) + ? string_printf (":%s", pulongest (queue_id.handle)) : ":?"); str += (dispatch_id != AMD_DBGAPI_DISPATCH_NONE - ? string_printf (":%ld", dispatch_id.handle) + ? string_printf (":%s", pulongest (dispatch_id.handle)) : ":?"); - str += string_printf (":%ld", wave_id.handle); + str += string_printf (":%s", pulongest (wave_id.handle)); str += (group_ids[0] != UINT32_MAX ? string_printf (" (%d,%d,%d)", group_ids[0], group_ids[1], @@ -591,9 +591,10 @@ amd_dbgapi_target_breakpoint::check_status (struct bpstat *bs) &action); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("amd_dbgapi_report_breakpoint_hit failed for breakpoint %ld " + error (_("amd_dbgapi_report_breakpoint_hit failed for breakpoint %s " "at %s (%s)"), - breakpoint_id.handle, paddress (inf->arch (), bs->bp_location_at->address), + pulongest (breakpoint_id.handle), + paddress (inf->arch (), bs->bp_location_at->address), get_status_string (status)); if (action == AMD_DBGAPI_BREAKPOINT_ACTION_RESUME) @@ -624,8 +625,9 @@ amd_dbgapi_target_breakpoint::check_status (struct bpstat *bs) for our breakpoint_id. */ if (resume_breakpoint_id != breakpoint_id) error (_("breakpoint resume event is not for this breakpoint. " - "Expected breakpoint_%ld, got breakpoint_%ld"), - breakpoint_id.handle, resume_breakpoint_id.handle); + "Expected breakpoint_%s, got breakpoint_%s"), + pulongest (breakpoint_id.handle), + pulongest (resume_breakpoint_id.handle)); amd_dbgapi_event_processed (resume_event_id); } @@ -1055,8 +1057,8 @@ amd_dbgapi_target::resume (ptid_t scope_ptid, int step, enum gdb_signal signo) indicate that the process has exited. GDB treats resuming a thread that no longer exists as being successful. */ && status != AMD_DBGAPI_STATUS_ERROR_INVALID_WAVE_ID) - error (_("wave_resume for wave_%ld failed (%s)"), wave_id.handle, - get_status_string (status)); + error (_("wave_resume for wave_%s failed (%s)"), + pulongest (wave_id.handle), get_status_string (status)); wi.stopping = false; } @@ -1130,12 +1132,12 @@ amd_dbgapi_target::stop (ptid_t ptid) } if (status != AMD_DBGAPI_STATUS_ERROR_INVALID_WAVE_ID) - error (_("wave_stop for wave_%ld failed (%s)"), wave_id.handle, - get_status_string (status)); + error (_("wave_stop for wave_%s failed (%s)"), + pulongest (wave_id.handle), get_status_string (status)); } else if (status != AMD_DBGAPI_STATUS_ERROR_INVALID_WAVE_ID) - error (_("wave_get_info for wave_%ld failed (%s)"), wave_id.handle, - get_status_string (status)); + error (_("wave_get_info for wave_%s failed (%s)"), + pulongest (wave_id.handle), get_status_string (status)); /* The status is AMD_DBGAPI_STATUS_ERROR_INVALID_WAVE_ID. The wave could have terminated since the last time the wave list was @@ -1145,9 +1147,9 @@ amd_dbgapi_target::stop (ptid_t ptid) wi.stopping = true; amd_dbgapi_debug_printf ("got AMD_DBGAPI_STATUS_ERROR_INVALID_WAVE_ID " - "for wave_%ld, last_resume_mode=%s, " + "for wave_%s, last_resume_mode=%s, " "report_thread_events=%d", - wave_id.handle, + pulongest (wave_id.handle), resume_mode_to_string (wi.last_resume_mode), m_report_thread_events); @@ -1212,8 +1214,8 @@ struct scoped_amd_dbgapi_event_processed { amd_dbgapi_status_t status = amd_dbgapi_event_processed (m_event_id); if (status != AMD_DBGAPI_STATUS_SUCCESS) - warning (_("Failed to acknowledge amd-dbgapi event %" PRIu64), - m_event_id.handle); + warning (_("Failed to acknowledge amd-dbgapi event %s"), + pulongest (m_event_id.handle)); } DISABLE_COPY_AND_ASSIGN (scoped_amd_dbgapi_event_processed); @@ -1268,8 +1270,8 @@ dbgapi_notifier_handler (int err, gdb_client_data client_data) sizeof (runtime_state), &runtime_state); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("event_get_info for event_%ld failed (%s)"), - event_id.handle, get_status_string (status)); + error (_("event_get_info for event_%s failed (%s)"), + pulongest (event_id.handle), get_status_string (status)); switch (runtime_state) { @@ -1404,7 +1406,7 @@ add_gpu_thread (inferior *inf, ptid_t wave_ptid) if (!info.wave_info_map.try_emplace (wave_id.handle, wave_info (wave_id)).second) - internal_error ("wave ID %ld already in map", wave_id.handle); + internal_error ("wave ID %s already in map", pulongest (wave_id.handle)); /* Create new GPU threads silently to avoid spamming the terminal with thousands of "[New Thread ...]" messages. */ @@ -1436,8 +1438,8 @@ process_one_event (amd_dbgapi_inferior_info &info, = amd_dbgapi_event_get_info (event_id, AMD_DBGAPI_EVENT_INFO_WAVE, sizeof (wave_id), &wave_id); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("event_get_info for event_%ld failed (%s)"), - event_id.handle, get_status_string (status)); + error (_("event_get_info for event_%s failed (%s)"), + pulongest (event_id.handle), get_status_string (status)); ptid_t event_ptid = make_gpu_ptid (info.inf->pid, wave_id); target_waitstatus ws; @@ -1502,8 +1504,8 @@ process_one_event (amd_dbgapi_inferior_info &info, } } else - error (_("wave_get_info for wave_%ld failed (%s)"), - wave_id.handle, get_status_string (status)); + error (_("wave_get_info for wave_%s failed (%s)"), + pulongest (wave_id.handle), get_status_string (status)); info.wave_events.emplace_back (event_ptid, ws); break; @@ -1542,8 +1544,8 @@ process_one_event (amd_dbgapi_inferior_info &info, AMD_DBGAPI_EVENT_INFO_RUNTIME_STATE, sizeof (runtime_state), &runtime_state); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("event_get_info for event_%ld failed (%s)"), - event_id.handle, get_status_string (status)); + error (_("event_get_info for event_%s failed (%s)"), + pulongest (event_id.handle), get_status_string (status)); gdb_assert (runtime_state == AMD_DBGAPI_RUNTIME_STATE_UNLOADED); gdb_assert @@ -1620,9 +1622,9 @@ process_event_queue (amd_dbgapi_inferior_info &info, if (event_kind != AMD_DBGAPI_EVENT_KIND_NONE) amd_dbgapi_debug_printf ("Pulled event from dbgapi: " - "event_id.handle = %" PRIu64 ", " + "event_id.handle = %s, " "event_kind = %s", - event_id.handle, + pulongest (event_id.handle), event_kind_str (event_kind)); if (event_id == AMD_DBGAPI_EVENT_NONE || event_kind == until_event_kind) @@ -1860,8 +1862,8 @@ attach_amd_dbgapi (inferior *inf) /* Are we already attached? */ if (info.process_id != AMD_DBGAPI_PROCESS_NONE) { - amd_dbgapi_debug_printf - ("already attached: process_id = %" PRIu64, info.process_id.handle); + amd_dbgapi_debug_printf ("already attached: process_id = %s", + pulongest (info.process_id.handle)); return; } @@ -1895,8 +1897,8 @@ attach_amd_dbgapi (inferior *inf) return; } - amd_dbgapi_debug_printf ("process_id = %" PRIu64 ", notifier fd = %d", - info.process_id.handle, + amd_dbgapi_debug_printf ("process_id = %s, notifier fd = %d", + pulongest (info.process_id.handle), amd_dbgapi_notifier_get_fd (info.notifier)); set_process_memory_precision (info); @@ -2069,15 +2071,16 @@ amd_dbgapi_target::thread_architecture (ptid_t ptid) sizeof (architecture_id), &architecture_id); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("Couldn't get architecture for wave_%ld"), ptid.tid ()); + error (_("Couldn't get architecture for wave_%s"), + pulongest (wave_id.handle)); uint32_t elf_amdgpu_machine; status = amd_dbgapi_architecture_get_info (architecture_id, AMD_DBGAPI_ARCHITECTURE_INFO_ELF_AMDGPU_MACHINE, sizeof (elf_amdgpu_machine), &elf_amdgpu_machine); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("Couldn't get elf_amdgpu_machine for architecture_%ld"), - architecture_id.handle); + error (_("Couldn't get elf_amdgpu_machine for architecture_%s"), + pulongest (architecture_id.handle)); struct gdbarch_info info; info.bfd_arch_info = bfd_lookup_arch (bfd_arch_amdgcn, elf_amdgpu_machine); @@ -2154,16 +2157,16 @@ amd_dbgapi_target::update_thread_list () || wi.stopping) { amd_dbgapi_debug_printf - ("wave_%ld disappeared, keeping it" + ("wave_%s disappeared, keeping it" " (last_resume_mode=%s, stopping=%d)", - wave_id.handle, + pulongest (wave_id.handle), resume_mode_to_string (wi.last_resume_mode), wi.stopping); } else { - amd_dbgapi_debug_printf ("wave_%ld disappeared, deleting it", - wave_id.handle); + amd_dbgapi_debug_printf ("wave_%s disappeared, deleting it", + pulongest (wave_id.handle)); delete_thread_silent (&tp); } } @@ -2283,8 +2286,8 @@ amd_dbgapi_target::displaced_step_finish (thread_info *thread, sizeof (stop_reason), &stop_reason); if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("wave_get_info for wave_%ld failed (%s)"), wave_id.handle, - get_status_string (status)); + error (_("wave_get_info for wave_%s failed (%s)"), + pulongest (wave_id.handle), get_status_string (status)); status = amd_dbgapi_displaced_stepping_complete (wave_id, stepping_id);