Debugging issue with gdbserver and a daemon on the target

Hi,

I am having a bit of difficult time to get a breakpoint hit on my
daemon. My setup is as follows:

== Target ==

gdbserver --attach 192.168.0.32:2345 pid-of-my-daemon

== Host ==

./tmp/sysroots/x86_64-linux/usr/bin/armv5te-foo-linux-gnueabi/cgdb -d
./tmp/sysroots/x86_64-linux/usr/bin/armv5te-foo-linux-gnueabi/arm-foo-linux-gnueabi-gdb
-s ./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/usr/bin/.debug/foo
-e ./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/usr/bin/foo
-q -ex set sysroot
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs -ex
tar rem192.168.0.1:2345

Reading symbols from
/home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/usr/bin/.debug/foo...done.
Remote debugging using 192.168.0.1:2345
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/librt.so.1...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/root
fs/lib/.debug/librt-2.17.so...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/librt.so.1
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libpthread.so.0...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0
/rootfs/lib/.debug/libpthread-2.17.so...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libpthread.so.0
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libgcc_s.so.1...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/r
ootfs/lib/.debug/libgcc_s.so.1...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libgcc_s.so.1
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libc.so.6...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootf
s/lib/.debug/libc-2.17.so...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libc.so.6
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/ld-linux.so.3...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/r
ootfs/lib/.debug/ld-2.17.so...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/ld-linux.so.3
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libnss_compat.so.2...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0
-r0/rootfs/lib/.debug/libnss_compat-2.17.so...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libnss_compat.so.2
Reading symbols from
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libnsl.so.1...Reading
symbols from /home/lpapp/Projects/Yocto/poky-dylan-9.0.1/build/tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/roo
tfs/lib/.debug/libnsl-2.17.so...done.
done.
Loaded symbols for
./tmp/work/foo-foo-linux-gnueabi/foo-core-image-dbg/1.0-r0/rootfs/lib/libnsl.so.1
0x44ad26ec in select () at ../sysdeps/unix/syscall-template.S:81
81      ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) set debug remote 1
(gdb) b foo
Sending packet: $maa1c,4#23...Packet received: 030052e1
Sending packet: $maa1c,4#23...Packet received: 030052e1
Sending packet: $maa1c,4#23...Packet received: 030052e1
Breakpoint 1 at 0xaa1c: file foo.c, line 99.
Sending packet: $qTStatus#49...Packet received:
(gdb) c
Continuing.
Sending packet: $qTStatus#49...Packet received:
Sending packet: $Z0,aa1c,4#6c...Packet received:
Packet Z0 (software-breakpoint) is NOT supported
Sending packet: $maa1c,4#23...Packet received: 030052e1
Sending packet: $Xaa1c,0:#44...Packet received: OK
binary downloading supported by target
Sending packet: $Xaa1c,4:\001#10...Packet received: OK
Sending packet: $m449e80c8,4#d6...Packet received: 1eff2fe1
Sending packet: $X449e80c8,4:\001#c3...Packet received: OK
Sending packet:
$QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;#5f...Packet
received: OK
Sending packet: $vCont?#49...Packet received: vCont;c;C;s;S;t
Packet vCont (verbose-resume) is supported
Program received signal SIGINT, Interrupt.
0x44ad26ec in select () at ../sysdeps/unix/syscall-template.S:81
81      in ../sysdeps/unix/syscall-template.S
(gdb) bt
#0  0x44ad26ec in select () at ../sysdeps/unix/syscall-template.S:81
#1  0x0002ac08 in bar (timeout=10, name=0x42f30 <yy_ec+56> "foo") at
src/socket.c:906
#2  0x0003284c in main (argc=0, argv=0x0) at src/bar.c:679
(gdb)


... And then I do some communication with the daemon where the foo
function is executed based on the logs, but the breakpoint is not hit.
I wished to try hardware breakpoints, but they are not presented on my
hardware.

Furthermore, if I use the same workflow on a binary that is
"one-shot", i.e. not running continuously as a daemon, the debugging
workflow for stopping at main works with exactly the aforementioned
software breakpoint issue.

I am completely clueless at this point. Do you know how I can debug a
daemon with gdbserver?

Cheers, L.