Re: Slow "symbol-file" when using GDB 12.1 on Windows hosts

On 3/15/23 15:50, Adrian Oltean via Gdb wrote:
> Hi,
> 
> We recently upgraded the GDB version (from 10.3 to 12.1) in one of our IDEs and
> found a painful performance issue on some Windows-based machines. I used
> Process Monitor to identify the events that occur during a "symbol-file" invocation.
> This is the command that now (GDB 12.1) seems to take ~2 seconds in the most
> favorable case, and ~20 seconds in the worst case (on some machines). Note that
> this happens with basic/small ELF files. Moreover, in GDB 10.3 execution of
> "symbol-file" is almost instant.
> 
> The relevant list of events reported by Process Monitor is the following:
> Time of Day,Process Name,PID,Operation,Path,Result,Detail
> 43:02.7, arm-none-eabi-gdb.exe, 13604, ReadFile, C:\MyIDE\workspace\MyProject\Debug\MyProject.axf, SUCCESS, "Offset: 272,405, Length: 512"
> 43:02.7, arm-none-eabi-gdb.exe, 13604, CreateFile, C:\MyIDE\workspace\MyProject\Debug , SUCCESS, "Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened"
> 43:02.7, arm-none-eabi-gdb.exe, 13604, QueryDirectory,C:\MyIDE\workspace\MyProject\Debug\MyProject.axf.dwp, NO SUCH FILE, "FileInformationClass: FileBothDirectoryInformation, Filter: MyProject.axf.dwp"
> 43:02.7, arm-none-eabi-gdb.exe, 13604, CloseFile, C:\MyIDE\workspace\MyProject\Debug,SUCCESS,
> 43:02.7, arm-none-eabi-gdb.exe, 13604, CreateFile, C:\MyIDE\workspace\MyProject\Debug\Users\MyUsername\Documents\MyIDE\workspace\MyProject\Debug\, PATH NOT FOUND, "Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a"
> 43:02.7, arm-none-eabi-gdb.exe, 13604, CreateFile, C:\Users\MyUsername\Users\MyUsername\Documents\MyIDE\workspace\MyProject\Debug\, PATH NOT FOUND, "Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a"
> 43:05.9, arm-none-eabi-gdb.exe, 13604, CreateFile, C:\Windows\CSC\v2.0.6\namespace\lib, NAME NOT FOUND, "Desired Access: Read EA, Write EA, Read Attributes, Write Attributes, Delete, Read Control, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a"
> 43:05.9, arm-none-eabi-gdb.exe, 13604, CreateFile, \\lib\debug\Users\MyUsername\Documents\MyIDE\workspace\MyProject\Debug\,BAD<file://lib/debug/Users/MyUsername/Documents/MyIDE/workspace/MyProject/Debug/,BAD> NETWORK PATH, "Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a"
> 43:05.9, arm-none-eabi-gdb.exe, 13604, CreateFile, C:\Windows\CSC\v2.0.6\namespace\lib, NAME NOT FOUND, "Desired Access: Read EA, Write EA, Read Attributes, Write Attributes, Delete, Read Control, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a"
> 43:05.9, arm-none-eabi-gdb.exe, 13604, CreateFile, C:\MyIDE\workspace\MyProject\Debug, SUCCESS, "Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened"
> 43:05.9, arm-none-eabi-gdb.exe, 13604, QueryDirectory, C:\MyIDE\workspace\MyProject\Debug\MyProject.axf.dwp, NO SUCH FILE, "FileInformationClass: FileBothDirectoryInformation, Filter: MyProject.axf.dwp"
> 
> I see attempts to read files/folders that aren't actually present on my machine. Also,
> a folder like "C:\Windows\CSC" (see "C:\Windows\CSC\v2.0.6\namespace\lib" above) isn't
> accessible on my machine without admin privileges (I don't have this, according to
> company policy). I observe that an attempt to access such a file/folder (or a network-specific
> path) hangs GDB for a few seconds. Questions:
> 
>    1.  Is GDB trying to find debug symbols in all those folders? Or what's with them?
>    2.  What is the code from GDB that artificially builds all those paths?
>    3.  GDB 10.2 does not seem to access "C:\Windows\CSC\v2.0.6\namespace\lib", nor
> "\\lib\debug\Users\MyUsername\...<file://lib/debug/Users/MyUsername/...>". Is this related to a recent change? Can someone
> point to the relevant change in this case?
> 
>    1.  Is there a command to stop GDB from attempting to access those files/folders?
> 
> Thank you,
> Adrian

I vaguely remember Eli ran into Windows-hosted gdb slowdowns before, but I'm not sure if it is related
to what's been described here.

Eli?