Re: CPU temperature thermal

On Tue, 5 Oct 2010 12:30:05 -0500, Bill Wilson wrote:
> On Tue, 5 Oct 2010 11:36:09 -0400
> Dennis Nezic <[email protected]> wrote:
> 
> > > I don't have any thermal_zone files either, but I'll go ahead and
> > > add a sensors interface for them.  I can only do a simulation
> > > test so hopefully it will end up working...
> > 
> > Is there a source code repo or tarball that I can test with? :D
> 
> Yes:
> 	http://members.dslextreme.com/users/billw/test/gkrellm-2.3.5-pre2.tar.bz2
> 
> It would be nice if you could test it and if it doesn't work, we
> could try to get it working before the next release if you're willing
> to help.

It works great! I <3 you.

"gkrellm -d 0x80" nicely says:
[...]
libsensors support is not compiled in.
load_sensors_config: <sensor_config_version> <1>
load_sensors_config: <sensor_sysdep_private> <1>
load_sensors_config: <sensor_float_factor> <10000>
load_sensors_config: <gkrellm_float_factor> <1000>
load_sensors_config: <sysdep_option> <use_nvclock 0>
load_sensors_config: <"c"> <"thermal_zone/THRM" 10000 0 1 2>
load_sensors_config: <units_fahrenheit> <0>
load_sensors_config: <show_units> <0>
load_sensors_config: <volt_display_mode> <1>
sensor_temp: temp /sys/class/thermal/thermal_zone0/temp t=0.00
sensor_temp: temp /sys/class/thermal/thermal_zone0/temp t=0.00
sensor_temp: temp /sys/class/thermal/thermal_zone0/temp t=48.00
sensor_temp: temp /sys/class/thermal/thermal_zone0/temp t=47.00
[...]

______________________________________________
Gkrellm mailing list
[email protected]
Read archives-join-leave-set RSS feed:
http://archive.lists.netservicesgroup.com
This service is provided by The Network Services Group:
http://www.netservicesgroup.com