[GNC-dev] FW: Failed to build GnuCash on Windows
"Chris Good" <[email protected]>
| Newsgroups | gmane.comp.gnome.apps.gnucash.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi Devs, I'd still like some help please with my Windows build so I can try to figure out why the Settings upgrade of org\gnucash to org\gnucash\GnuCash partially failed and there were the following error messages in the tracefile: * 18:14:11 WARN <GLib-GIO> subscribe() failed: only 64 different paths may be watched. Is this not worth following up? Regards, Chris Good -----Original Message----- From: Chris Good <[email protected]> Sent: Friday, 21 January 2022 11:19 AM To: [email protected] Cc: 'Explorare' <[email protected]> Subject: RE: [GNC-dev] Failed to build GnuCash on Windows -----Original Message----- From: Chris Good <[email protected]> Sent: Monday, 17 January 2022 7:08 PM To: 'Explorare' <[email protected]> Cc: [email protected] Subject: RE: [GNC-dev] Failed to build GnuCash on Windows -----Original Message----- From: Explorare <[email protected]> Sent: Monday, 17 January 2022 6:46 PM To: Chris Good <[email protected]> Cc: [email protected] Subject: Re: [GNC-dev] Failed to build GnuCash on Windows Hi Chris, I don't have much time to spend on this issue and only uses the reserved "XTS" to record USDT transactions. I always uses USDT as a bridge between the other crypto currencies and legal tender. In this way the only exchange rate I need to update is USDT (XTS), and I also need to transfer the current net worth of all crypto currencies into USDT and record it as a gain or loss. I treat it as a whole. And more detailed transaction and analysis can be generated by whatever crypto exchange app you are using. Adding all those crypto currencies requires a source to fetch current price, which is another bigger issue. And the price of thoes currencies change so dramatically which makes it harded to get a overview of net worth of those. GL;HF explorare On 1/16/2022 4:56 PM, Chris Good wrote: > Hi Explorare, > > Re thread > > https://www.mail-archive.com/[email protected]/msg42675.html > <https://www.mail-archive.com/[email protected]/msg42675.html> > > Did you ever resolve this? > > I’m getting the same error now trying to build 32 Bit Gnucash (maint > approx. 4.9) on Windows 10. > > This is the error: > > cd /e/Data/GnuCash/gcdev64/src/gnucash-on-windows.git > TARGET=gnucash-maint jhbuild -f jhbuildrc build ... > > make[1]: Leaving directory > '/e/Data/GnuCash/gcdev64/gnucash/maint/build/OpenSP-1.5.2' > I: Deleting .la file: > '/e/Data/GnuCash/gcdev64/gnucash/maint/inst/_jhbuild/root-OpenSP/e/Data/GnuCash/gcdev64/gnucash/maint/inst/lib/libosp.la' > I: Moving temporary DESTDIR > '/e/Data/GnuCash/gcdev64/gnucash/maint/inst/_jhbuild/root-OpenSP' into > build prefix Traceback (most recent call last): > File "/usr/bin/jhbuild", line 23, in <module> > jhbuild.main.main(sys.argv[1:]) > File "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/main.py", > line 120, in main > rc = jhbuild.commands.run(command, config, args, help=lambda: > print_help(parser)) > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/commands/__init__.py" > , > line 188, in run > return cmd.execute(config, args, help) > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/commands/__init__.py" > , > line 56, in execute > return self.run(config, options, args, help) > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/commands/base.py", > line 263, in run > return build.build() > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/frontends/buildscript > .py", > line 172, in build > error, altphases = module.run_phase(self, phase) > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/modtypes/__init__.py" > , > line 423, in run_phase > method(buildscript) > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/modtypes/autotools.py > ", > line 320, in do_install > self.process_install(buildscript, self.get_revision()) > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/modtypes/__init__.py" > , > line 390, in process_install > buildscript.moduleset.packagedb.add(self.name, revision or '', > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/utils/packagedb.py", > line 176, in add > pkg.write() > File > "/e/Data/GnuCash/gcdev64/src/jhbuild.git/jhbuild/utils/packagedb.py", > line 79, in write > writer.fp.write('\n'.join(self.manifest).encode('utf-8', > 'backslashreplace') + b'\n') > TypeError: can only join an iterable > > Python -V in the MinGW32 shell shows: > python -V > Python 3.9.7 > > Regards, > > Chris Good Hi Explorare, Thanks for the reply. I was actually asking about the python error when building with: writer.fp.write('\n'.join(self.manifest).encode('utf-8', 'backslashreplace') + b'\n') Regards, Chris Good Hi Devs, Can I get some help with this pls? I seem to only have python 3.9.7 installed. Is this relevant? : E:\Data\GnuCash\gcdev64\src\jhbuild.git\modulesets\bootstrap.modules: <autotools id="python" autogenargs="--enable-shared" autogen-sh="configure"> <pkg-config>python-2.7.pc</pkg-config> <branch repo="python" module="${version}/Python-${version}.tar.xz" version="2.7.14" hash="md5:1f6db41ad91d9eb0a6f0c769b8613c5b" size="12576112"> <patch file="https://gitlab.gnome.org/GNOME/gtk-osx/raw/master/patches/python2-linkflags.patch" strip="1"/> </branch> </autotools> Setup: .. Optional dependencies for git python: various helper scripts [installed] subversion: git svn :: Running post-transaction hooks... (1/1) Updating the info directory file... resolving dependencies... looking for conflicting packages... warning: removing 'mingw-w64-i686-pkg-config' from target list because it conflicts with 'mingw-w64-i686-pkgconf' .. looking for conflicting packages... :: autoconf and autoconf-wrapper are in conflict. Remove autoconf-wrapper? [Y/n] :: pkg-config and pkgconf are in conflict. Remove pkgconf? [Y/n] Attached are full logs: First setup: 20220117_1 Setup-mingw64.ps1.txt Rerun setup after I manually downloaded mingw-w64-i686-webkitgtk3-2.4.11-999.4-any.pkg.tar.zst.sig and put it in gcdev64\msys2\var\cache\pacman\pkg to fix error: Maximum file size exceeded (Maybe I should just have rerun setup?) 20220117_2 Setup-ming64.ps1.txt Build: 20220117_3 BuildWin32GnuCashErr.txt Regards, Chris Good _______________________________________________ gnucash-devel mailing list [email protected] https://lists.gnucash.org/mailman/listinfo/gnucash-devel
20220117_1 Setup-mingw64.ps1.txt
(text/plain, 90.5 KB)
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\Users\goodc> e:
PS E:\> cd .\data\GnuCash\gcdev64\
PS E:\data\GnuCash\gcdev64> dir
Directory: E:\data\GnuCash\gcdev64
Mode LastWriteTime Length Name
---- ------------- ------ ----
d----- 17/01/2022 10:37 AM downloads
-a---- 16/01/2022 3:07 PM 15130 setup-mingw64.ps1
-a---- 12/01/2022 7:29 PM 15017 setup-mingw64_20220112.ps1
PS E:\data\GnuCash\gcdev64> .\setup-mingw64.ps1 -target_dir e:\Data\GnuCash\gcdev64
target_dir=e:\Data\GnuCash\gcdev64
download_dir=e:\Data\GnuCash\gcdev64\\downloads
msys2_root=e:\Data\GnuCash\gcdev64\\msys2
x86_64=False
preferred_mirror=http://repo.msys2.org
Downloading e:\Data\GnuCash\gcdev64\\downloads\msys2-x86_64-latest.exe from http://repo.msys2.org/distrib/msys2-x86_64-latest.exe
Installing e:\Data\GnuCash\gcdev64\\downloads\msys2-x86_64-latest.exe --script e:\Data\GnuCash\gcdev64\input.qs
get-item : Cannot find path 'HKCU:\SOFTWARE\Microsoft\HTML Help Workshop' because it does not exist.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:205 char:17
+ ... talled_hh = get-item -path "hkcu:\SOFTWARE\Microsoft\HTML Help Worksh ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (HKCU:\SOFTWARE\...L Help Workshop:String) [Get-Item], ItemNotFoundExcep
tion
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
Downloading e:\Data\GnuCash\gcdev64\\downloads\htmlhelp.exe from http://download.microsoft.com/download/0/a/9/0a939ef6-e31c-430f-a3df-dfae7960d564/htmlhelp.exe
Exception calling "DownloadFile" with "2" argument(s): "The remote server returned an error: (404) Not Found."
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:119 char:2
+ (New-Object System.Net.WebClient).DownloadFile($url, "$download_f ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : WebException
Installing e:\Data\GnuCash\gcdev64\\downloads\htmlhelp.exe
Exception calling "Start" with "1" argument(s): "The system cannot find the file specified"
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:126 char:5
+ $proc = [Diagnostics.Process]::Start($psi)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : Win32Exception
You cannot call a method on a null-valued expression.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:127 char:5
+ $proc.waitForExit()
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Updating the installation. Accept the proposed changes. If the window doesn't close on its own then close it and re-run the script when it finishes.
:: Synchronizing package databases...
mingw32 1431.7 KiB 308 KiB/s 00:05 [#######################################] 100%
mingw64 1438.6 KiB 406 KiB/s 00:04 [#######################################] 100%
ucrt64 1571.7 KiB 428 KiB/s 00:04 [#######################################] 100%
clang64 1479.8 KiB 549 KiB/s 00:03 [#######################################] 100%
msys 372.7 KiB 120 KiB/s 00:03 [#######################################] 100%
:: Starting core system upgrade...
warning: terminate other MSYS2 programs before proceeding
resolving dependencies...
looking for conflicting packages...
Packages (3) msys2-runtime-3.3.3-6 pacman-6.0.1-9 pacman-mirrors-20211230-1
Total Download Size: 8.68 MiB
Total Installed Size: 43.59 MiB
Net Upgrade Size: 0.30 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
pacman-mirrors-20211230-1-any 3.9 KiB 6.63 KiB/s 00:01 [#######################################] 100%
msys2-runtime-3.3.3-6-x86_64 3.2 MiB 1391 KiB/s 00:02 [#######################################] 100%
pacman-6.0.1-9-x86_64 5.5 MiB 1469 KiB/s 00:04 [#######################################] 100%
Total (3/3) 8.7 MiB 2.16 MiB/s 00:04 [#######################################] 100%
(3/3) checking keys in keyring [#######################################] 100%
(3/3) checking package integrity [#######################################] 100%
(3/3) loading package files [#######################################] 100%
(3/3) checking for file conflicts [#######################################] 100%
(3/3) checking available disk space [#######################################] 100%
:: Processing package changes...
(1/3) upgrading msys2-runtime [#######################################] 100%
(2/3) upgrading pacman-mirrors [#######################################] 100%
(3/3) upgrading pacman [#######################################] 100%
:: To complete this update all MSYS2 processes including this terminal will be closed. Confirm to proceed [Y/n]
:: Synchronizing package databases...
mingw32 1431.7 KiB 280 KiB/s 00:05 [#######################################] 100%
mingw64 1438.6 KiB 483 KiB/s 00:03 [#######################################] 100%
ucrt64 1571.7 KiB 444 KiB/s 00:04 [#######################################] 100%
clang64 1479.8 KiB 580 KiB/s 00:03 [#######################################] 100%
msys 372.7 KiB 132 KiB/s 00:03 [#######################################] 100%
:: Starting core system upgrade...
there is nothing to do
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (29) bzip2-1.0.8-3 file-5.41-2 gawk-5.1.0-2 gcc-libs-11.2.0-3 getent-2.18.90-3 gettext-0.21-1 icu-70.1-1
inetutils-1.9.4-3 info-6.8-3 libargp-20110921-3 libasprintf-0.21-1 libbz2-1.0.8-3 libexpat-2.4.3-1
libgettextpo-0.21-1 libintl-0.21-1 libopenssl-1.1.1.m-1 libsqlite-3.36.0-3 libtasn1-4.18.0-2
libxml2-2.9.12-3 libzstd-1.5.1-1 msys2-keyring-1~20211228-1 ncurses-6.2-2 openssl-1.1.1.m-1
perl-5.32.1-2 sed-4.8-2 tftp-hpa-5.2-4 time-1.9-2 which-2.21-3 zstd-1.5.1-1
Total Download Size: 26.58 MiB
Total Installed Size: 123.29 MiB
Net Upgrade Size: -10.19 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
libopenssl-1.1.1.m-1-x86_64 1199.9 KiB 782 KiB/s 00:02 [#######################################] 100%
gettext-0.21-1-x86_64 1724.4 KiB 1028 KiB/s 00:02 [#######################################] 100%
gcc-libs-11.2.0-3-x86_64 1538.7 KiB 905 KiB/s 00:02 [#######################################] 100%
file-5.41-2-x86_64 637.0 KiB 666 KiB/s 00:01 [#######################################] 100%
gawk-5.1.0-2-x86_64 1113.2 KiB 862 KiB/s 00:01 [#######################################] 100%
ncurses-6.2-2-x86_64 1061.1 KiB 635 KiB/s 00:02 [#######################################] 100%
perl-5.32.1-2-x86_64 6.5 MiB 1937 KiB/s 00:03 [#######################################] 100%
openssl-1.1.1.m-1-x86_64 591.5 KiB 596 KiB/s 00:01 [#######################################] 100%
libsqlite-3.36.0-3-x86_64 614.6 KiB 505 KiB/s 00:01 [#######################################] 100%
icu-70.1-1-x86_64 9.6 MiB 2.16 MiB/s 00:04 [#######################################] 100%
sed-4.8-2-x86_64 232.4 KiB 364 KiB/s 00:01 [#######################################] 100%
libxml2-2.9.12-3-x86_64 538.0 KiB 456 KiB/s 00:01 [#######################################] 100%
zstd-1.5.1-1-x86_64 345.6 KiB 293 KiB/s 00:01 [#######################################] 100%
libzstd-1.5.1-1-x86_64 284.6 KiB 338 KiB/s 00:01 [#######################################] 100%
inetutils-1.9.4-3-x86_64 193.3 KiB 474 KiB/s 00:00 [#######################################] 100%
info-6.8-3-x86_64 177.8 KiB 581 KiB/s 00:00 [#######################################] 100%
libtasn1-4.18.0-2-x86_64 96.5 KiB 322 KiB/s 00:00 [#######################################] 100%
libgettextpo-0.21-1-x86_64 122.5 KiB 345 KiB/s 00:00 [#######################################] 100%
bzip2-1.0.8-3-x86_64 56.9 KiB 185 KiB/s 00:00 [#######################################] 100%
msys2-keyring-1~20211228-1-any 41.9 KiB 134 KiB/s 00:00 [#######################################] 100%
libargp-20110921-3-x86_64 36.0 KiB 114 KiB/s 00:00 [#######################################] 100%
libbz2-1.0.8-3-x86_64 30.3 KiB 97.0 KiB/s 00:00 [#######################################] 100%
libexpat-2.4.3-1-x86_64 61.8 KiB 104 KiB/s 00:01 [#######################################] 100%
time-1.9-2-x86_64 24.3 KiB 71.1 KiB/s 00:00 [#######################################] 100%
libintl-0.21-1-x86_64 21.5 KiB 66.6 KiB/s 00:00 [#######################################] 100%
which-2.21-3-x86_64 19.7 KiB 47.5 KiB/s 00:00 [#######################################] 100%
tftp-hpa-5.2-4-x86_64 19.7 KiB 68.0 KiB/s 00:00 [#######################################] 100%
getent-2.18.90-3-x86_64 12.2 KiB 11.9 KiB/s 00:01 [#######################################] 100%
libasprintf-0.21-1-x86_64 6.0 KiB 6.28 KiB/s 00:01 [#######################################] 100%
Total (29/29) 26.6 MiB 3.95 MiB/s 00:07 [#######################################] 100%
(29/29) checking keys in keyring [#######################################] 100%
(29/29) checking package integrity [#######################################] 100%
(29/29) loading package files [#######################################] 100%
(29/29) checking for file conflicts [#######################################] 100%
(29/29) checking available disk space [#######################################] 100%
:: Processing package changes...
( 1/29) upgrading gcc-libs [#######################################] 100%
( 2/29) upgrading libbz2 [#######################################] 100%
( 3/29) upgrading bzip2 [#######################################] 100%
( 4/29) upgrading file [#######################################] 100%
( 5/29) upgrading libintl [#######################################] 100%
( 6/29) upgrading ncurses [#######################################] 100%
( 7/29) upgrading gawk [#######################################] 100%
( 8/29) upgrading libargp [#######################################] 100%
( 9/29) upgrading getent [#######################################] 100%
(10/29) upgrading libgettextpo [#######################################] 100%
(11/29) upgrading libasprintf [#######################################] 100%
(12/29) upgrading gettext [#######################################] 100%
(13/29) upgrading icu [#######################################] 100%
(14/29) upgrading tftp-hpa [#######################################] 100%
(15/29) upgrading inetutils [#######################################] 100%
(16/29) upgrading info [#######################################] 100%
(17/29) upgrading libexpat [#######################################] 100%
(18/29) upgrading libopenssl [#######################################] 100%
(19/29) upgrading libsqlite [#######################################] 100%
(20/29) upgrading libtasn1 [#######################################] 100%
(21/29) upgrading libxml2 [#######################################] 100%
(22/29) upgrading libzstd [#######################################] 100%
(23/29) upgrading msys2-keyring [#######################################] 100%
==> Appending keys from msys2.gpg...
==> Updating trust database...
gpg: next trustdb check due at 2022-06-26
(24/29) upgrading openssl [#######################################] 100%
(25/29) upgrading perl [#######################################] 100%
(26/29) upgrading sed [#######################################] 100%
(27/29) upgrading time [#######################################] 100%
(28/29) upgrading which [#######################################] 100%
(29/29) upgrading zstd [#######################################] 100%
:: Running post-transaction hooks...
(1/1) Updating the info directory file...
warning: file-5.41-2 is up to date -- skipping
warning: gawk-5.1.0-2 is up to date -- skipping
warning: gettext-0.21-1 is up to date -- skipping
warning: grep-1~3.0-3 is up to date -- skipping
warning: pacman-6.0.1-9 is up to date -- skipping
warning: perl-5.32.1-2 is up to date -- skipping
warning: sed-4.8-2 is up to date -- skipping
warning: wget-1.21.2-1 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
Packages (86) automake1.11-1.11.6-6 automake1.12-1.12.6-6 automake1.13-1.13.4-7 automake1.14-1.14.1-6
automake1.15-1.15.1-4 automake1.16-1.16.3-3 docbook-xml-4.5-2 docbook-xsl-1.79.2-1 expat-2.4.3-1
heimdal-7.7.0-3 libatomic_ops-7.6.12-1 libgc-8.0.6-1 libguile-2.2.7-1 libiconv-devel-1.16-2
libltdl-2.4.6-14 libpcre2_16-10.37-1 libpcre2_32-10.37-1 libpcre2posix-10.37-1 libpipeline-1.5.4-1
libxxhash-0.8.1-1 mpdecimal-2.5.0-1 openssh-8.8p1-1 pcre2-10.37-1 perl-Authen-SASL-2.16-2
perl-Clone-0.45-2 perl-Convert-BinHex-1.125-1 perl-Encode-Locale-1.05-1 perl-Error-0.17029-1
perl-File-Listing-6.14-1 perl-HTML-Parser-3.76-1 perl-HTML-Tagset-3.20-2 perl-HTTP-Cookies-6.10-1
perl-HTTP-Daemon-6.12-1 perl-HTTP-Date-6.05-1 perl-HTTP-Message-6.35-1 perl-HTTP-Negotiate-6.01-2
perl-IO-HTML-1.004-1 perl-IO-Socket-SSL-2.072-1 perl-IO-Stringy-2.113-1 perl-LWP-MediaTypes-6.04-1
perl-MIME-tools-5.509-1 perl-MailTools-2.21-1 perl-Module-Build-0.4231-1 perl-Net-HTTP-6.21-1
perl-Net-SMTP-SSL-1.04-1 perl-Net-SSLeay-1.90-1 perl-TermReadKey-2.38-2 perl-Test-Pod-1.52-1
perl-TimeDate-2.33-1 perl-Try-Tiny-0.31-1 perl-URI-5.10-1 perl-WWW-RobotRules-6.02-2
perl-XML-Parser-2.46-3 perl-YAML-Syck-1.34-1 perl-inc-latest-0.500-1 perl-libwww-6.57-1 tar-1.34-2
vim-8.2.3582-1 asciidoc-9.1.1-1 autoconf-2.71-3 autoconf2.13-2.13-5 autogen-5.18.16-3
automake-wrapper-11-4 bison-3.8.2-2 diffstat-1.64-1 diffutils-3.8-2 dos2unix-7.4.2-1 flex-2.6.4-2
gettext-devel-0.21-1 git-2.34.1-1 gperf-3.1-3 groff-1.22.4-2 intltool-0.51.0-2 libtool-2.4.6-14
m4-1.4.19-2 make-4.3-3 man-db-2.9.4-1 pactoys-r55.8860e1f-1 patch-2.7.6-1 patchutils-0.4.2-2
pkg-config-0.29.2-4 python-3.9.9-2 rsync-3.2.3-2 texinfo-6.8-3 texinfo-tex-6.8-3 xmlto-0.0.28-2
Total Download Size: 54.37 MiB
Total Installed Size: 327.58 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
python-3.9.9-2-x86_64 16.1 MiB 2.91 MiB/s 00:06 [#######################################] 100%
libguile-2.2.7-1-x86_64 4.8 MiB 866 KiB/s 00:06 [#######################################] 100%
gettext-devel-0.21-1-x86_64 1261.6 KiB 1669 KiB/s 00:01 [#######################################] 100%
texinfo-6.8-3-x86_64 1185.9 KiB 1384 KiB/s 00:01 [#######################################] 100%
vim-8.2.3582-1-x86_64 8.0 MiB 1243 KiB/s 00:07 [#######################################] 100%
git-2.34.1-1-x86_64 5.4 MiB 773 KiB/s 00:07 [#######################################] 100%
openssh-8.8p1-1-x86_64 898.9 KiB 1048 KiB/s 00:01 [#######################################] 100%
tar-1.34-2-x86_64 801.1 KiB 929 KiB/s 00:01 [#######################################] 100%
libiconv-devel-1.16-2-x86_64 685.8 KiB 1584 KiB/s 00:00 [#######################################] 100%
pcre2-10.37-1-x86_64 662.0 KiB 1615 KiB/s 00:00 [#######################################] 100%
docbook-xsl-1.79.2-1-any 740.0 KiB 960 KiB/s 00:01 [#######################################] 100%
autogen-5.18.16-3-x86_64 644.5 KiB 1766 KiB/s 00:00 [#######################################] 100%
autoconf-2.71-3-any 643.3 KiB 1870 KiB/s 00:00 [#######################################] 100%
man-db-2.9.4-1-x86_64 568.5 KiB 1047 KiB/s 00:01 [#######################################] 100%
automake1.16-1.16.3-3-any 518.8 KiB 1128 KiB/s 00:00 [#######################################] 100%
automake1.15-1.15.1-4-any 513.4 KiB 1208 KiB/s 00:00 [#######################################] 100%
automake1.14-1.14.1-6-any 503.1 KiB 1484 KiB/s 00:00 [#######################################] 100%
automake1.12-1.12.6-6-any 503.1 KiB 1184 KiB/s 00:00 [#######################################] 100%
automake1.13-1.13.4-7-any 501.5 KiB 1492 KiB/s 00:00 [#######################################] 100%
automake1.11-1.11.6-6-any 490.2 KiB 1238 KiB/s 00:00 [#######################################] 100%
make-4.3-3-x86_64 466.2 KiB 1267 KiB/s 00:00 [#######################################] 100%
heimdal-7.7.0-3-x86_64 430.2 KiB 1336 KiB/s 00:00 [#######################################] 100%
libtool-2.4.6-14-x86_64 388.1 KiB 1194 KiB/s 00:00 [#######################################] 100%
rsync-3.2.3-2-x86_64 343.4 KiB 928 KiB/s 00:00 [#######################################] 100%
dos2unix-7.4.2-1-x86_64 336.7 KiB 933 KiB/s 00:00 [#######################################] 100%
flex-2.6.4-2-x86_64 302.6 KiB 885 KiB/s 00:00 [#######################################] 100%
m4-1.4.19-2-x86_64 238.1 KiB 717 KiB/s 00:00 [#######################################] 100%
perl-Net-SSLeay-1.90-1-x86_64 236.3 KiB 743 KiB/s 00:00 [#######################################] 100%
pkg-config-0.29.2-4-x86_64 202.0 KiB 598 KiB/s 00:00 [#######################################] 100%
perl-MIME-tools-5.509-1-any 194.9 KiB 627 KiB/s 00:00 [#######################################] 100%
perl-Module-Build-0.4231-1-any 193.4 KiB 569 KiB/s 00:00 [#######################################] 100%
asciidoc-9.1.1-1-any 178.8 KiB 543 KiB/s 00:00 [#######################################] 100%
libgc-8.0.6-1-x86_64 169.7 KiB 537 KiB/s 00:00 [#######################################] 100%
perl-XML-Parser-2.46-3-x86_64 160.2 KiB 464 KiB/s 00:00 [#######################################] 100%
perl-IO-Socket-SSL-2.072-1-any 153.2 KiB 494 KiB/s 00:00 [#######################################] 100%
autoconf2.13-2.13-5-any 136.3 KiB 433 KiB/s 00:00 [#######################################] 100%
perl-libwww-6.57-1-any 128.0 KiB 416 KiB/s 00:00 [#######################################] 100%
libpcre2_16-10.37-1-x86_64 109.3 KiB 356 KiB/s 00:00 [#######################################] 100%
mpdecimal-2.5.0-1-x86_64 104.8 KiB 334 KiB/s 00:00 [#######################################] 100%
patch-2.7.6-1-x86_64 101.6 KiB 336 KiB/s 00:00 [#######################################] 100%
diffutils-3.8-2-x86_64 362.4 KiB 98.2 KiB/s 00:04 [#######################################] 100%
libpcre2_32-10.37-1-x86_64 101.3 KiB 317 KiB/s 00:00 [#######################################] 100%
docbook-xml-4.5-2-any 81.4 KiB 271 KiB/s 00:00 [#######################################] 100%
gperf-3.1-3-x86_64 101.4 KiB 107 KiB/s 00:01 [#######################################] 100%
patchutils-0.4.2-2-x86_64 81.2 KiB 259 KiB/s 00:00 [#######################################] 100%
perl-MailTools-2.21-1-any 81.0 KiB 266 KiB/s 00:00 [#######################################] 100%
bison-3.8.2-2-x86_64 770.0 KiB 104 KiB/s 00:07 [#######################################] 100%
perl-HTML-Parser-3.76-1-x86_64 80.5 KiB 273 KiB/s 00:00 [#######################################] 100%
groff-1.22.4-2-x86_64 2023.2 KiB 142 KiB/s 00:14 [#######################################] 100%
perl-URI-5.10-1-any 76.4 KiB 198 KiB/s 00:00 [#######################################] 100%
perl-HTTP-Message-6.35-1-any 75.9 KiB 190 KiB/s 00:00 [#######################################] 100%
perl-IO-Stringy-2.113-1-any 66.4 KiB 169 KiB/s 00:00 [#######################################] 100%
perl-YAML-Syck-1.34-1-x86_64 68.3 KiB 167 KiB/s 00:00 [#######################################] 100%
perl-TimeDate-2.33-1-any 55.2 KiB 155 KiB/s 00:00 [#######################################] 100%
perl-Convert-BinHex-1.125-1-any 42.8 KiB 121 KiB/s 00:00 [#######################################] 100%
perl-Authen-SASL-2.16-2-any 42.4 KiB 111 KiB/s 00:00 [#######################################] 100%
perl-TermReadKey-2.38-2-x86_64 42.0 KiB 110 KiB/s 00:00 [#######################################] 100%
xmlto-0.0.28-2-x86_64 41.0 KiB 104 KiB/s 00:00 [#######################################] 100%
perl-LWP-MediaTypes-6.04-1-any 40.7 KiB 94.2 KiB/s 00:00 [#######################################] 100%
perl-HTTP-Daemon-6.12-1-any 39.6 KiB 103 KiB/s 00:00 [#######################################] 100%
perl-Error-0.17029-1-any 39.4 KiB 114 KiB/s 00:00 [#######################################] 100%
intltool-0.51.0-2-x86_64 39.4 KiB 116 KiB/s 00:00 [#######################################] 100%
libltdl-2.4.6-14-x86_64 32.0 KiB 84.4 KiB/s 00:00 [#######################################] 100%
libpipeline-1.5.4-1-x86_64 30.0 KiB 87.9 KiB/s 00:00 [#######################################] 100%
diffstat-1.64-1-x86_64 29.3 KiB 85.5 KiB/s 00:00 [#######################################] 100%
expat-2.4.3-1-x86_64 31.0 KiB 59.6 KiB/s 00:01 [#######################################] 100%
perl-HTTP-Date-6.05-1-any 28.9 KiB 68.1 KiB/s 00:00 [#######################################] 100%
texinfo-tex-6.8-3-x86_64 26.5 KiB 68.9 KiB/s 00:00 [#######################################] 100%
perl-inc-latest-0.500-1-any 25.5 KiB 69.8 KiB/s 00:00 [#######################################] 100%
pactoys-r55.8860e1f-1-x86_64 24.9 KiB 58.0 KiB/s 00:00 [#######################################] 100%
perl-Encode-Locale-1.05-1-any 24.3 KiB 76.8 KiB/s 00:00 [#######################################] 100%
perl-Net-HTTP-6.21-1-any 23.9 KiB 61.5 KiB/s 00:00 [#######################################] 100%
perl-Test-Pod-1.52-1-any 23.8 KiB 68.3 KiB/s 00:00 [#######################################] 100%
perl-HTTP-Cookies-6.10-1-any 23.4 KiB 53.7 KiB/s 00:00 [#######################################] 100%
libxxhash-0.8.1-1-x86_64 22.5 KiB 54.7 KiB/s 00:00 [#######################################] 100%
perl-Try-Tiny-0.31-1-any 19.8 KiB 58.6 KiB/s 00:00 [#######################################] 100%
perl-Net-SMTP-SSL-1.04-1-any 18.4 KiB 60.9 KiB/s 00:00 [#######################################] 100%
perl-IO-HTML-1.004-1-any 16.1 KiB 38.1 KiB/s 00:00 [#######################################] 100%
perl-WWW-RobotRules-6.02-2-any 12.2 KiB 30.0 KiB/s 00:00 [#######################################] 100%
perl-File-Listing-6.14-1-any 11.7 KiB 35.2 KiB/s 00:00 [#######################################] 100%
perl-HTTP-Negotiate-6.01-2-any 11.4 KiB 35.7 KiB/s 00:00 [#######################################] 100%
perl-Clone-0.45-2-x86_64 11.3 KiB 34.0 KiB/s 00:00 [#######################################] 100%
perl-HTML-Tagset-3.20-2-any 10.3 KiB 28.2 KiB/s 00:00 [#######################################] 100%
libpcre2posix-10.37-1-x86_64 6.0 KiB 19.0 KiB/s 00:00 [#######################################] 100%
libatomic_ops-7.6.12-1-any 8.5 KiB 24.5 KiB/s 00:00 [#######################################] 100%
automake-wrapper-11-4-any 4.4 KiB 4.76 KiB/s 00:01 [#######################################] 100%
Total (86/86) 54.4 MiB 2.95 MiB/s 00:18 [#######################################] 100%
(86/86) checking keys in keyring [#######################################] 100%
(86/86) checking package integrity [#######################################] 100%
(86/86) loading package files [#######################################] 100%
(86/86) checking for file conflicts [#######################################] 100%
(86/86) checking available disk space [#######################################] 100%
:: Processing package changes...
( 1/86) installing mpdecimal [#######################################] 100%
( 2/86) installing python [#######################################] 100%
( 3/86) installing docbook-xml [#######################################] 100%
( 4/86) installing docbook-xsl [#######################################] 100%
( 5/86) installing asciidoc [#######################################] 100%
( 6/86) installing m4 [#######################################] 100%
( 7/86) installing diffutils [#######################################] 100%
( 8/86) installing autoconf [#######################################] 100%
( 9/86) installing autoconf2.13 [#######################################] 100%
(10/86) installing libatomic_ops [#######################################] 100%
(11/86) installing libgc [#######################################] 100%
(12/86) installing libltdl [#######################################] 100%
(13/86) installing libguile [#######################################] 100%
(14/86) installing autogen [#######################################] 100%
(15/86) installing automake1.11 [#######################################] 100%
(16/86) installing automake1.12 [#######################################] 100%
(17/86) installing automake1.13 [#######################################] 100%
(18/86) installing automake1.14 [#######################################] 100%
(19/86) installing automake1.15 [#######################################] 100%
(20/86) installing automake1.16 [#######################################] 100%
(21/86) installing automake-wrapper [#######################################] 100%
(22/86) installing bison [#######################################] 100%
(23/86) installing diffstat [#######################################] 100%
(24/86) installing dos2unix [#######################################] 100%
(25/86) installing flex [#######################################] 100%
(26/86) installing libiconv-devel [#######################################] 100%
(27/86) installing gettext-devel [#######################################] 100%
Optional dependencies for gettext-devel
cvs: for autopoint tool
(28/86) installing gperf [#######################################] 100%
(29/86) installing groff [#######################################] 100%
(30/86) installing perl-XML-Parser [#######################################] 100%
(31/86) installing intltool [#######################################] 100%
(32/86) installing tar [#######################################] 100%
(33/86) installing libtool [#######################################] 100%
(34/86) installing make [#######################################] 100%
(35/86) installing libpipeline [#######################################] 100%
(36/86) installing man-db [#######################################] 100%
it's recommended to create an initial
database running as root:
"/usr/bin/mandb --quiet"
Optional dependencies for man-db
gzip [installed]
(37/86) installing pactoys [#######################################] 100%
(38/86) installing patch [#######################################] 100%
Optional dependencies for patch
ed: for patch -e functionality
(39/86) installing libpcre2_16 [#######################################] 100%
(40/86) installing libpcre2_32 [#######################################] 100%
(41/86) installing libpcre2posix [#######################################] 100%
(42/86) installing pcre2 [#######################################] 100%
(43/86) installing patchutils [#######################################] 100%
(44/86) installing pkg-config [#######################################] 100%
(45/86) installing libxxhash [#######################################] 100%
(46/86) installing rsync [#######################################] 100%
(47/86) installing texinfo [#######################################] 100%
(48/86) installing texinfo-tex [#######################################] 100%
(49/86) installing perl-YAML-Syck [#######################################] 100%
(50/86) installing perl-inc-latest [#######################################] 100%
(51/86) installing perl-Module-Build [#######################################] 100%
(52/86) installing perl-Test-Pod [#######################################] 100%
(53/86) installing xmlto [#######################################] 100%
(54/86) installing expat [#######################################] 100%
(55/86) installing vim [#######################################] 100%
(56/86) installing heimdal [#######################################] 100%
(57/86) installing openssh [#######################################] 100%
(58/86) installing perl-Error [#######################################] 100%
(59/86) installing perl-Authen-SASL [#######################################] 100%
(60/86) installing perl-Encode-Locale [#######################################] 100%
(61/86) installing perl-HTTP-Date [#######################################] 100%
(62/86) installing perl-File-Listing [#######################################] 100%
(63/86) installing perl-HTML-Tagset [#######################################] 100%
(64/86) installing perl-Clone [#######################################] 100%
(65/86) installing perl-IO-HTML [#######################################] 100%
(66/86) installing perl-LWP-MediaTypes [#######################################] 100%
(67/86) installing perl-URI [#######################################] 100%
(68/86) installing perl-HTTP-Message [#######################################] 100%
(69/86) installing perl-HTML-Parser [#######################################] 100%
(70/86) installing perl-HTTP-Cookies [#######################################] 100%
(71/86) installing perl-HTTP-Daemon [#######################################] 100%
(72/86) installing perl-HTTP-Negotiate [#######################################] 100%
(73/86) installing perl-Net-HTTP [#######################################] 100%
(74/86) installing perl-WWW-RobotRules [#######################################] 100%
(75/86) installing perl-Try-Tiny [#######################################] 100%
(76/86) installing perl-libwww [#######################################] 100%
Optional dependencies for perl-libwww
perl-LWP-Protocol-https: for https:// url schemes
(77/86) installing perl-TimeDate [#######################################] 100%
(78/86) installing perl-MailTools [#######################################] 100%
(79/86) installing perl-IO-Stringy [#######################################] 100%
(80/86) installing perl-Convert-BinHex [#######################################] 100%
module test... pass.
(81/86) installing perl-MIME-tools [#######################################] 100%
(82/86) installing perl-Net-SSLeay [#######################################] 100%
(83/86) installing perl-IO-Socket-SSL [#######################################] 100%
(84/86) installing perl-Net-SMTP-SSL [#######################################] 100%
(85/86) installing perl-TermReadKey [#######################################] 100%
(86/86) installing git [#######################################] 100%
Optional dependencies for git
python: various helper scripts [installed]
subversion: git svn
:: Running post-transaction hooks...
(1/1) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...
warning: removing 'mingw-w64-i686-pkg-config' from target list because it conflicts with 'mingw-w64-i686-pkgconf'
Packages (63) mingw-w64-i686-brotli-1.0.9-4 mingw-w64-i686-bzip2-1.0.8-2 mingw-w64-i686-c-ares-1.17.2-1
mingw-w64-i686-ca-certificates-20210119-1 mingw-w64-i686-curl-7.81.0-1 mingw-w64-i686-expat-2.4.3-1
mingw-w64-i686-gettext-0.21-3 mingw-w64-i686-gmp-6.2.1-3 mingw-w64-i686-isl-0.24-1
mingw-w64-i686-jansson-2.14-1 mingw-w64-i686-jemalloc-5.2.1-2 mingw-w64-i686-jsoncpp-1.9.4-1
mingw-w64-i686-libarchive-3.5.2-1 mingw-w64-i686-libffi-3.3-4 mingw-w64-i686-libiconv-1.16-2
mingw-w64-i686-libidn2-2.3.1-1 mingw-w64-i686-libpsl-0.21.1-4 mingw-w64-i686-libssh2-1.10.0-1
mingw-w64-i686-libsystre-1.0.1-4 mingw-w64-i686-libtasn1-4.18.0-1
mingw-w64-i686-libtre-git-r128.6fb7206-2 mingw-w64-i686-libunistring-0.9.10-4
mingw-w64-i686-libuv-1.42.0-3 mingw-w64-i686-libxml2-2.9.12-3 mingw-w64-i686-lz4-1.9.3-1
mingw-w64-i686-mpc-1.2.1-1 mingw-w64-i686-mpdecimal-2.5.1-1 mingw-w64-i686-mpfr-4.1.0.p13-1
mingw-w64-i686-ncurses-6.3-3 mingw-w64-i686-nettle-3.7.3-3 mingw-w64-i686-nghttp2-1.46.0-1
mingw-w64-i686-openssl-1.1.1.m-1 mingw-w64-i686-p11-kit-0.24.0-1 mingw-w64-i686-pcre-8.45-1
mingw-w64-i686-pkgconf-1.8.0-2 mingw-w64-i686-python-3.9.7-4 mingw-w64-i686-readline-8.1.001-1
mingw-w64-i686-rhash-1.4.2-1 mingw-w64-i686-sqlite3-3.37.2-1 mingw-w64-i686-tcl-8.6.11-5
mingw-w64-i686-termcap-1.3.1-6 mingw-w64-i686-tk-8.6.11.1-2 mingw-w64-i686-tzdata-2021e-1
mingw-w64-i686-windows-default-manifest-6.4-3 mingw-w64-i686-wineditline-2.205-3
mingw-w64-i686-xxhash-0.8.1-1 mingw-w64-i686-xz-5.2.5-2 mingw-w64-i686-zlib-1.2.11-9
mingw-w64-i686-zstd-1.5.1-1 mingw-w64-i686-binutils-2.37-4 mingw-w64-i686-cmake-3.22.1-1
mingw-w64-i686-crt-git-9.0.0.6373.5be8fcd83-1 mingw-w64-i686-gcc-11.2.0-6
mingw-w64-i686-gcc-libs-11.2.0-6 mingw-w64-i686-gdb-11.1-2
mingw-w64-i686-headers-git-9.0.0.6373.5be8fcd83-1 mingw-w64-i686-libltdl-2.4.6-21
mingw-w64-i686-libmangle-git-9.0.0.6373.5be8fcd83-1
mingw-w64-i686-libwinpthread-git-9.0.0.6373.5be8fcd83-1 mingw-w64-i686-make-4.3-1
mingw-w64-i686-swig-4.0.2-3 mingw-w64-i686-tools-git-9.0.0.6373.5be8fcd83-1
mingw-w64-i686-winpthreads-git-9.0.0.6373.5be8fcd83-1
Total Download Size: 111.65 MiB
Total Installed Size: 829.69 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
mingw-w64-i686-binutils-2.37-4-any 5.5 MiB 1127 KiB/s 00:05 [#######################################] 100%
mingw-w64-i686-sqlite3-3.37.2-1-any 6.8 MiB 999 KiB/s 00:07 [#######################################] 100%
mingw-w64-i686-headers-git-9.0.0.6373.... 5.3 MiB 1300 KiB/s 00:04 [#######################################] 100%
mingw-w64-i686-openssl-1.1.1.m-1-any 4.7 MiB 1276 KiB/s 00:04 [#######################################] 100%
mingw-w64-i686-cmake-3.22.1-1-any 9.9 MiB 887 KiB/s 00:11 [#######################################] 100%
mingw-w64-i686-gdb-11.1-2-any 4.4 MiB 1326 KiB/s 00:03 [#######################################] 100%
mingw-w64-i686-gettext-0.21-3-any 3.1 MiB 1451 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-tcl-8.6.11-5-any 2.6 MiB 1259 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-crt-git-9.0.0.6373.5be8... 2.5 MiB 1483 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-tk-8.6.11.1-2-any 1985.6 KiB 1089 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-ncurses-6.3-3-any 1618.6 KiB 1289 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libxml2-2.9.12-3-any 1495.0 KiB 2.72 MiB/s 00:01 [#######################################] 100%
mingw-w64-i686-python-3.9.7-4-any 16.8 MiB 1124 KiB/s 00:15 [#######################################] 100%
mingw-w64-i686-curl-7.81.0-1-any 1323.5 KiB 2.68 MiB/s 00:00 [#######################################] 100%
mingw-w64-i686-swig-4.0.2-3-any 1090.5 KiB 824 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-nettle-3.7.3-3-any 916.0 KiB 553 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-isl-0.24-1-any 983.5 KiB 460 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-gcc-11.2.0-6-any 29.2 MiB 1684 KiB/s 00:18 [#######################################] 100%
mingw-w64-i686-libarchive-3.5.2-1-any 772.4 KiB 768 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-pcre-8.45-1-any 889.3 KiB 317 KiB/s 00:03 [#######################################] 100%
mingw-w64-i686-libunistring-0.9.10-4-any 707.3 KiB 1480 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libuv-1.42.0-3-any 542.1 KiB 1153 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-gmp-6.2.1-3-any 527.1 KiB 1413 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-zstd-1.5.1-1-any 485.5 KiB 1258 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-gcc-libs-11.2.0-6-any 886.9 KiB 370 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-readline-8.1.001-1-any 379.5 KiB 1143 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-brotli-1.0.9-4-any 378.3 KiB 1066 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-xz-5.2.5-2-any 367.1 KiB 1151 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-jemalloc-5.2.1-2-any 342.9 KiB 741 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-p11-kit-0.24.0-1-any 338.9 KiB 1062 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libiconv-1.16-2-any 750.5 KiB 373 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-mpfr-4.1.0.p13-1-any 338.7 KiB 1075 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-mpdecimal-2.5.1-1-any 324.8 KiB 747 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-ca-certificates-2021011... 318.5 KiB 923 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-tools-git-9.0.0.6373.5b... 311.6 KiB 939 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-jsoncpp-1.9.4-1-any 260.3 KiB 806 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libssh2-1.10.0-1-any 258.1 KiB 802 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-rhash-1.4.2-1-any 240.5 KiB 699 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-nghttp2-1.46.0-1-any 207.8 KiB 611 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-c-ares-1.17.2-1-any 203.9 KiB 591 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libtasn1-4.18.0-1-any 193.1 KiB 466 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-tzdata-2021e-1-any 179.0 KiB 467 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-make-4.3-1-any 155.1 KiB 499 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-lz4-1.9.3-1-any 153.7 KiB 479 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libidn2-2.3.1-1-any 135.1 KiB 348 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-xxhash-0.8.1-1-any 119.4 KiB 330 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-zlib-1.2.11-9-any 105.3 KiB 314 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-bzip2-1.0.8-2-any 92.0 KiB 287 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libtre-git-r128.6fb7206... 84.1 KiB 235 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-pkgconf-1.8.0-2-any 83.4 KiB 251 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libpsl-0.21.1-4-any 75.3 KiB 189 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-mpc-1.2.1-1-any 73.3 KiB 181 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-jansson-2.14-1-any 58.0 KiB 170 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-wineditline-2.205-3-any 57.8 KiB 140 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libltdl-2.4.6-21-any 52.7 KiB 134 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-expat-2.4.3-1-any 157.2 KiB 96.9 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-libffi-3.3-4-any 43.7 KiB 126 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-winpthreads-git-9.0.0.6... 39.9 KiB 115 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libwinpthread-git-9.0.0... 31.7 KiB 81.0 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-termcap-1.3.1-6-any 30.1 KiB 84.1 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libsystre-1.0.1-4-any 23.7 KiB 70.3 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libmangle-git-9.0.0.637... 22.1 KiB 21.3 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-windows-default-manifes... 12.9 KiB 9.82 KiB/s 00:01 [#######################################] 100%
Total (63/63) 111.6 MiB 4.80 MiB/s 00:23 [#######################################] 100%
(63/63) checking keys in keyring [#######################################] 100%
(63/63) checking package integrity [#######################################] 100%
(63/63) loading package files [#######################################] 100%
(63/63) checking for file conflicts [#######################################] 100%
(63/63) checking available disk space [#######################################] 100%
:: Processing package changes...
( 1/63) installing mingw-w64-i686-libiconv [#######################################] 100%
( 2/63) installing mingw-w64-i686-zlib [#######################################] 100%
( 3/63) installing mingw-w64-i686-binutils [#######################################] 100%
( 4/63) installing mingw-w64-i686-gmp [#######################################] 100%
( 5/63) installing mingw-w64-i686-mpfr [#######################################] 100%
( 6/63) installing mingw-w64-i686-mpc [#######################################] 100%
( 7/63) installing mingw-w64-i686-libwinpthread-git [#######################################] 100%
( 8/63) installing mingw-w64-i686-gcc-libs [#######################################] 100%
( 9/63) installing mingw-w64-i686-pkgconf [#######################################] 100%
(10/63) installing mingw-w64-i686-c-ares [#######################################] 100%
(11/63) installing mingw-w64-i686-brotli [#######################################] 100%
(12/63) installing mingw-w64-i686-expat [#######################################] 100%
(13/63) installing mingw-w64-i686-gettext [#######################################] 100%
(14/63) installing mingw-w64-i686-libunistring [#######################################] 100%
(15/63) installing mingw-w64-i686-libidn2 [#######################################] 100%
(16/63) installing mingw-w64-i686-libpsl [#######################################] 100%
(17/63) installing mingw-w64-i686-zstd [#######################################] 100%
(18/63) installing mingw-w64-i686-libtasn1 [#######################################] 100%
(19/63) installing mingw-w64-i686-libffi [#######################################] 100%
(20/63) installing mingw-w64-i686-p11-kit [#######################################] 100%
(21/63) installing mingw-w64-i686-ca-certificates [#######################################] 100%
(22/63) installing mingw-w64-i686-openssl [#######################################] 100%
(23/63) installing mingw-w64-i686-libssh2 [#######################################] 100%
(24/63) installing mingw-w64-i686-jansson [#######################################] 100%
(25/63) installing mingw-w64-i686-jemalloc [#######################################] 100%
(26/63) installing mingw-w64-i686-xz [#######################################] 100%
(27/63) installing mingw-w64-i686-libxml2 [#######################################] 100%
(28/63) installing mingw-w64-i686-nghttp2 [#######################################] 100%
(29/63) installing mingw-w64-i686-curl [#######################################] 100%
(30/63) installing mingw-w64-i686-jsoncpp [#######################################] 100%
(31/63) installing mingw-w64-i686-bzip2 [#######################################] 100%
(32/63) installing mingw-w64-i686-lz4 [#######################################] 100%
(33/63) installing mingw-w64-i686-libtre-git [#######################################] 100%
(34/63) installing mingw-w64-i686-libsystre [#######################################] 100%
(35/63) installing mingw-w64-i686-nettle [#######################################] 100%
(36/63) installing mingw-w64-i686-libarchive [#######################################] 100%
(37/63) installing mingw-w64-i686-libuv [#######################################] 100%
(38/63) installing mingw-w64-i686-rhash [#######################################] 100%
(39/63) installing mingw-w64-i686-cmake [#######################################] 100%
Optional dependencies for mingw-w64-i686-cmake
mingw-w64-i686-qt6-base: CMake Qt GUI
mingw-w64-i686-emacs: for cmake emacs mode
(40/63) installing mingw-w64-i686-headers-git [#######################################] 100%
(41/63) installing mingw-w64-i686-crt-git [#######################################] 100%
(42/63) installing mingw-w64-i686-isl [#######################################] 100%
(43/63) installing mingw-w64-i686-windows-default-manifest [#######################################] 100%
(44/63) installing mingw-w64-i686-winpthreads-git [#######################################] 100%
(45/63) installing mingw-w64-i686-gcc [#######################################] 100%
(46/63) installing mingw-w64-i686-ncurses [#######################################] 100%
(47/63) installing mingw-w64-i686-mpdecimal [#######################################] 100%
(48/63) installing mingw-w64-i686-termcap [#######################################] 100%
(49/63) installing mingw-w64-i686-readline [#######################################] 100%
(50/63) installing mingw-w64-i686-tcl [#######################################] 100%
(51/63) installing mingw-w64-i686-sqlite3 [#######################################] 100%
(52/63) installing mingw-w64-i686-tk [#######################################] 100%
(53/63) installing mingw-w64-i686-tzdata [#######################################] 100%
(54/63) installing mingw-w64-i686-python [#######################################] 100%
(55/63) installing mingw-w64-i686-xxhash [#######################################] 100%
(56/63) installing mingw-w64-i686-gdb [#######################################] 100%
Optional dependencies for mingw-w64-i686-gdb
mingw-w64-i686-python-pygments: for syntax highlighting
(57/63) installing mingw-w64-i686-libmangle-git [#######################################] 100%
(58/63) installing mingw-w64-i686-libltdl [#######################################] 100%
(59/63) installing mingw-w64-i686-make [#######################################] 100%
(60/63) installing mingw-w64-i686-wineditline [#######################################] 100%
(61/63) installing mingw-w64-i686-pcre [#######################################] 100%
(62/63) installing mingw-w64-i686-swig [#######################################] 100%
(63/63) installing mingw-w64-i686-tools-git [#######################################] 100%
Now we'll install a pre-built webkitgtk3 package we've created and placed in the GnuCash project on SourceForge. It will install several more dependencies from Mingw-w64's repository.
--2022-01-17 10:54:34-- https://downloads.sourceforge.net/gnucash/Dependencies/jralls_public_signing_key.asc
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 204.68.111.105
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|204.68.111.105|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://versaweb.dl.sourceforge.net/project/gnucash/Dependencies/jralls_public_signing_key.asc [following]
--2022-01-17 10:54:35-- https://versaweb.dl.sourceforge.net/project/gnucash/Dependencies/jralls_public_signing_key.asc
Resolving versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)... 162.251.232.173
Connecting to versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)|162.251.232.173|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1806 (1.8K) [application/octet-stream]
Saving to: 'jralls_public_signing_key.asc'
jralls_public_signing_key.asc 100%[=================================================>] 1.76K --.-KB/s in 0s
2022-01-17 10:54:36 (383 MB/s) - 'jralls_public_signing_key.asc' saved [1806/1806]
==> Updating trust database...
gpg: next trustdb check due at 2022-06-26
########################################################
### Setup hung here - interrupted and rerun ###
########################################################
PS E:\data\GnuCash\gcdev64>
PS E:\data\GnuCash\gcdev64> .\setup-mingw64.ps1 -target_dir e:\Data\GnuCash\gcdev64
target_dir=e:\Data\GnuCash\gcdev64
download_dir=e:\Data\GnuCash\gcdev64\\downloads
msys2_root=e:\Data\GnuCash\gcdev64\\msys2
x86_64=False
preferred_mirror=http://repo.msys2.org
get-item : Cannot find path 'HKCU:\SOFTWARE\Microsoft\HTML Help Workshop' because it does not exist.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:205 char:17
+ ... talled_hh = get-item -path "hkcu:\SOFTWARE\Microsoft\HTML Help Worksh ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (HKCU:\SOFTWARE\...L Help Workshop:String) [Get-Item], ItemNotFoundExcep
tion
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
Downloading e:\Data\GnuCash\gcdev64\\downloads\htmlhelp.exe from http://download.microsoft.com/download/0/a/9/0a939ef6-e31c-430f-a3df-dfae7960d564/htmlhelp.exe
Exception calling "DownloadFile" with "2" argument(s): "The remote server returned an error: (404) Not Found."
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:119 char:2
+ (New-Object System.Net.WebClient).DownloadFile($url, "$download_f ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : WebException
Installing e:\Data\GnuCash\gcdev64\\downloads\htmlhelp.exe
Exception calling "Start" with "1" argument(s): "The system cannot find the file specified"
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:126 char:5
+ $proc = [Diagnostics.Process]::Start($psi)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : Win32Exception
You cannot call a method on a null-valued expression.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:127 char:5
+ $proc.waitForExit()
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Updating the installation. Accept the proposed changes. If the window doesn't close on its own then close it and re-run the script when it finishes.
:: Synchronizing package databases...
mingw32 1431.7 KiB 933 KiB/s 00:02 [#######################################] 100%
mingw64 1438.6 KiB 198 KiB/s 00:07 [#######################################] 100%
ucrt64 1571.7 KiB 835 KiB/s 00:02 [#######################################] 100%
clang64 1479.8 KiB 165 KiB/s 00:09 [#######################################] 100%
msys 372.7 KiB 230 KiB/s 00:02 [#######################################] 100%
:: Starting core system upgrade...
there is nothing to do
:: Starting full system upgrade...
:: Replace autoconf with msys/autoconf-wrapper? [Y/n]
:: Replace pkg-config with msys/pkgconf? [Y/n]
resolving dependencies...
looking for conflicting packages...
Packages (6) autoconf-2.71-3 [removal] autoconf-wrapper-15-1 autoconf2.69-2.69-1 autoconf2.71-2.71-1
pkg-config-0.29.2-4 [removal] pkgconf-1.8.0-1
Total Download Size: 0.66 MiB
Total Installed Size: 3.92 MiB
Net Upgrade Size: 1.16 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
pkgconf-1.8.0-1-x86_64 58.4 KiB 201 KiB/s 00:00 [#######################################] 100%
autoconf2.71-2.71-1-any 326.6 KiB 912 KiB/s 00:00 [#######################################] 100%
autoconf-wrapper-15-1-any 4.7 KiB 12.5 KiB/s 00:00 [#######################################] 100%
autoconf2.69-2.69-1-any 286.1 KiB 582 KiB/s 00:00 [#######################################] 100%
Total (4/4) 675.7 KiB 883 KiB/s 00:01 [#######################################] 100%
(4/4) checking keys in keyring [#######################################] 100%
(4/4) checking package integrity [#######################################] 100%
(4/4) loading package files [#######################################] 100%
(4/4) checking for file conflicts [#######################################] 100%
(6/6) checking available disk space [#######################################] 100%
:: Running pre-transaction hooks...
(1/1) Removing old entries from the info directory file...
:: Processing package changes...
(1/2) removing pkg-config [#######################################] 100%
(2/2) removing autoconf [#######################################] 100%
(1/4) installing autoconf2.71 [#######################################] 100%
(2/4) installing autoconf2.69 [#######################################] 100%
(3/4) installing autoconf-wrapper [#######################################] 100%
(4/4) installing pkgconf [#######################################] 100%
:: Synchronizing package databases...
mingw32 1431.7 KiB 1200 KiB/s 00:01 [#######################################] 100%
mingw64 1438.6 KiB 386 KiB/s 00:04 [#######################################] 100%
ucrt64 1571.7 KiB 732 KiB/s 00:02 [#######################################] 100%
clang64 1479.8 KiB 344 KiB/s 00:04 [#######################################] 100%
msys 372.7 KiB 311 KiB/s 00:01 [#######################################] 100%
:: Starting core system upgrade...
there is nothing to do
:: Starting full system upgrade...
there is nothing to do
warning: asciidoc-9.1.1-1 is up to date -- skipping
warning: autoconf2.13-2.13-5 is up to date -- skipping
warning: autogen-5.18.16-3 is up to date -- skipping
warning: automake-wrapper-11-4 is up to date -- skipping
warning: bison-3.8.2-2 is up to date -- skipping
warning: diffstat-1.64-1 is up to date -- skipping
warning: diffutils-3.8-2 is up to date -- skipping
warning: dos2unix-7.4.2-1 is up to date -- skipping
warning: file-5.41-2 is up to date -- skipping
warning: flex-2.6.4-2 is up to date -- skipping
warning: gawk-5.1.0-2 is up to date -- skipping
warning: gettext-0.21-1 is up to date -- skipping
warning: gettext-devel-0.21-1 is up to date -- skipping
warning: gperf-3.1-3 is up to date -- skipping
warning: grep-1~3.0-3 is up to date -- skipping
warning: groff-1.22.4-2 is up to date -- skipping
warning: intltool-0.51.0-2 is up to date -- skipping
warning: libtool-2.4.6-14 is up to date -- skipping
warning: m4-1.4.19-2 is up to date -- skipping
warning: make-4.3-3 is up to date -- skipping
warning: man-db-2.9.4-1 is up to date -- skipping
warning: pacman-6.0.1-9 is up to date -- skipping
warning: pactoys-r55.8860e1f-1 is up to date -- skipping
warning: patch-2.7.6-1 is up to date -- skipping
warning: patchutils-0.4.2-2 is up to date -- skipping
warning: perl-5.32.1-2 is up to date -- skipping
warning: python-3.9.9-2 is up to date -- skipping
warning: rsync-3.2.3-2 is up to date -- skipping
warning: sed-4.8-2 is up to date -- skipping
warning: texinfo-6.8-3 is up to date -- skipping
warning: texinfo-tex-6.8-3 is up to date -- skipping
warning: wget-1.21.2-1 is up to date -- skipping
warning: xmlto-0.0.28-2 is up to date -- skipping
warning: git-2.34.1-1 is up to date -- skipping
warning: texinfo-6.8-3 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
:: autoconf and autoconf-wrapper are in conflict. Remove autoconf-wrapper? [Y/n]
:: pkg-config and pkgconf are in conflict. Remove pkgconf? [Y/n]
Packages (4) autoconf-wrapper-15-1 [removal] pkgconf-1.8.0-1 [removal] autoconf-2.71-3 pkg-config-0.29.2-4
Total Installed Size: 2.76 MiB
Net Upgrade Size: 2.45 MiB
:: Proceed with installation? [Y/n]
(2/2) checking keys in keyring [#######################################] 100%
(2/2) checking package integrity [#######################################] 100%
(2/2) loading package files [#######################################] 100%
(2/2) checking for file conflicts [#######################################] 100%
(4/4) checking available disk space [#######################################] 100%
:: Processing package changes...
(1/2) removing pkgconf [#######################################] 100%
(2/2) removing autoconf-wrapper [#######################################] 100%
(1/2) installing autoconf [#######################################] 100%
(2/2) installing pkg-config [#######################################] 100%
:: Running post-transaction hooks...
(1/1) Updating the info directory file...
warning: mingw-w64-i686-binutils-2.37-4 is up to date -- skipping
warning: mingw-w64-i686-cmake-3.22.1-1 is up to date -- skipping
warning: mingw-w64-i686-crt-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-gcc-11.2.0-6 is up to date -- skipping
warning: mingw-w64-i686-gcc-libs-11.2.0-6 is up to date -- skipping
warning: mingw-w64-i686-gdb-11.1-2 is up to date -- skipping
warning: mingw-w64-i686-headers-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-libmangle-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-libltdl-2.4.6-21 is up to date -- skipping
warning: mingw-w64-i686-libwinpthread-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-make-4.3-1 is up to date -- skipping
warning: mingw-w64-i686-swig-4.0.2-3 is up to date -- skipping
warning: mingw-w64-i686-tools-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-winpthreads-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
:: mingw-w64-i686-pkg-config and mingw-w64-i686-pkgconf are in conflict. Remove mingw-w64-i686-pkgconf? [Y/n]
error: failed to prepare transaction (could not satisfy dependencies)
:: removing mingw-w64-i686-pkgconf breaks dependency 'mingw-w64-i686-pkgconf' required by mingw-w64-i686-cmake
Now we'll install a pre-built webkitgtk3 package we've created and placed in the GnuCash project on SourceForge. It will install several more dependencies from Mingw-w64's repository.
--2022-01-17 11:07:22-- https://downloads.sourceforge.net/gnucash/Dependencies/jralls_public_signing_key.asc
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 204.68.111.105
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|204.68.111.105|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://versaweb.dl.sourceforge.net/project/gnucash/Dependencies/jralls_public_signing_key.asc [following]
--2022-01-17 11:07:23-- https://versaweb.dl.sourceforge.net/project/gnucash/Dependencies/jralls_public_signing_key.asc
Resolving versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)... 162.251.232.173
Connecting to versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)|162.251.232.173|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1806 (1.8K) [application/octet-stream]
Saving to: 'jralls_public_signing_key.asc'
jralls_public_signing_key.asc 100%[=================================================>] 1.76K --.-KB/s in 0s
2022-01-17 11:07:24 (366 MB/s) - 'jralls_public_signing_key.asc' saved [1806/1806]
==> Updating trust database...
gpg: next trustdb check due at 2022-06-26
-> Locally signed 1 keys.
==> Updating trust database...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 7 trust: 0-, 0q, 0n, 0m, 0f, 1u
gpg: depth: 1 valid: 7 signed: 6 trust: 1-, 0q, 0n, 6m, 0f, 0u
gpg: depth: 2 valid: 6 signed: 0 trust: 6-, 0q, 0n, 0m, 0f, 0u
gpg: next trustdb check due at 2022-06-26
:: Retrieving packages...
mingw-w64-i686-webkitgtk3-2.4.11-999.4-any 8.1 MiB 2.04 MiB/s 00:04 [#######################################] 100%
error: failed retrieving file 'mingw-w64-i686-webkitgtk3-2.4.11-999.4-any.pkg.tar.zst.sig' from master.dl.sourceforge.net : Maximum file size exceeded
warning: failed to retrieve some files
Now we'll install the dependencies. Accept the installation as usual. About half-way through it will stop with a message about fontconfig. Just type "Return" at it and it will resume after a minute or two (be patient!) and complete the installation.
warning: mingw-w64-i686-sqlite3-3.37.2-1 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
warning: dependency cycle detected:
warning: mingw-w64-i686-libwebp will be installed before its mingw-w64-i686-libtiff dependency
warning: dependency cycle detected:
warning: mingw-w64-i686-harfbuzz will be installed before its mingw-w64-i686-freetype dependency
Packages (50) mingw-w64-i686-adobe-source-code-pro-fonts-2.038ro+1.058it+1.018var-1
mingw-w64-i686-adwaita-icon-theme-41.0-1 mingw-w64-i686-atk-2.36.0-2 mingw-w64-i686-cairo-1.17.4-4
mingw-w64-i686-cantarell-fonts-0.303.1-1 mingw-w64-i686-docbook-xml-1~4.5-2
mingw-w64-i686-fontconfig-2.13.94-1 mingw-w64-i686-freetype-2.11.1-2 mingw-w64-i686-fribidi-1.0.11-1
mingw-w64-i686-gdk-pixbuf2-2.42.6-2 mingw-w64-i686-giflib-5.2.1-3
mingw-w64-i686-glib-networking-2.70.1-1 mingw-w64-i686-glib2-2.70.2-2 mingw-w64-i686-gnutls-3.7.2-5
mingw-w64-i686-graphite2-1.3.14-2 mingw-w64-i686-gsettings-desktop-schemas-41.0-1
mingw-w64-i686-gtk-update-icon-cache-3.24.31+56+g7e9935e381-1 mingw-w64-i686-harfbuzz-3.2.0-1
mingw-w64-i686-hicolor-icon-theme-0.17-2 mingw-w64-i686-jbigkit-2.1-4 mingw-w64-i686-json-glib-1.6.6-2
mingw-w64-i686-lerc-3.0-3 mingw-w64-i686-libdatrie-0.2.13-1 mingw-w64-i686-libdeflate-1.8-2
mingw-w64-i686-libepoxy-1.5.9-1 mingw-w64-i686-libgcrypt-1.9.4-1 mingw-w64-i686-libgpg-error-1.43-1
mingw-w64-i686-libjpeg-turbo-2.1.2-2 mingw-w64-i686-libpng-1.6.37-6 mingw-w64-i686-libproxy-0.4.17-3
mingw-w64-i686-librsvg-2.52.5-2 mingw-w64-i686-libthai-0.1.29-1 mingw-w64-i686-libtiff-4.3.0-7
mingw-w64-i686-libxslt-1.1.34-4 mingw-w64-i686-lzo2-2.10-2 mingw-w64-i686-pango-1.50.3-1
mingw-w64-i686-pixman-0.40.0-2 winpty-0.4.3-1 mingw-w64-i686-boost-1.78.0-1
mingw-w64-i686-docbook-xsl-1.79.2-7 mingw-w64-i686-gtk3-3.24.31+56+g7e9935e381-1
mingw-w64-i686-icu-69.1-1 mingw-w64-i686-iso-codes-4.9.0-1 mingw-w64-i686-libmariadbclient-3.1.12-1
mingw-w64-i686-libsoup-2.74.2-1 mingw-w64-i686-libwebp-1.2.1-1 mingw-w64-i686-ninja-1.10.2-3
mingw-w64-i686-pdcurses-4.3.1-1 mingw-w64-i686-postgresql-14.0-1 mingw-w64-i686-shared-mime-info-2.1-4
Total Download Size: 105.54 MiB
Total Installed Size: 815.29 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
mingw-w64-i686-librsvg-2.52.5-2-any 8.2 MiB 190 KiB/s 00:44 [#######################################] 100%
mingw-w64-i686-gtk3-3.24.31+56+g7e9935... 9.7 MiB 219 KiB/s 00:45 [#######################################] 100%
mingw-w64-i686-adwaita-icon-theme-41.0... 11.2 MiB 247 KiB/s 00:46 [#######################################] 100%
mingw-w64-i686-postgresql-14.0-1-any 7.9 MiB 2.16 MiB/s 00:04 [#######################################] 100%
mingw-w64-i686-iso-codes-4.9.0-1-any 3.1 MiB 1731 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-glib2-2.70.2-2-any 3.5 MiB 1213 KiB/s 00:03 [#######################################] 100%
mingw-w64-i686-gnutls-3.7.2-5-any 2.1 MiB 1798 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-ninja-1.10.2-3-any 2.5 MiB 1171 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-pango-1.50.3-1-any 2.1 MiB 1050 KiB/s 00:02 [#######################################] 100%
mingw-w64-i686-gdk-pixbuf2-2.42.6-2-any 1889.1 KiB 1691 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-harfbuzz-3.2.0-1-any 1218.2 KiB 1291 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libtiff-4.3.0-7-any 998.4 KiB 996 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-adobe-source-code-pro-f... 974.0 KiB 1142 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libepoxy-1.5.9-1-any 832.2 KiB 866 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-cairo-1.17.4-4-any 791.3 KiB 887 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-docbook-xsl-1.79.2-7-any 792.0 KiB 879 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libsoup-2.74.2-1-any 764.9 KiB 748 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-gsettings-desktop-schem... 665.9 KiB 685 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libgcrypt-1.9.4-1-any 680.0 KiB 663 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-shared-mime-info-2.1-4-any 612.8 KiB 1055 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-boost-1.78.0-1-any 18.0 MiB 345 KiB/s 00:54 [#######################################] 100%
mingw-w64-i686-libjpeg-turbo-2.1.2-2-any 517.1 KiB 1043 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-freetype-2.11.1-2-any 581.4 KiB 1061 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libwebp-1.2.1-1-any 464.0 KiB 1022 KiB/s 00:00 [#######################################] 100%
winpty-0.4.3-1-x86_64 500.5 KiB 676 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libxslt-1.1.34-4-any 445.1 KiB 883 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libpng-1.6.37-6-any 382.2 KiB 642 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-atk-2.36.0-2-any 374.0 KiB 786 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libmariadbclient-3.1.12... 377.5 KiB 498 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libgpg-error-1.43-1-any 324.3 KiB 693 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-pixman-0.40.0-2-any 317.0 KiB 659 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-json-glib-1.6.6-2-any 248.3 KiB 571 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-fontconfig-2.13.94-1-any 247.7 KiB 704 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-lerc-3.0-3-any 227.0 KiB 672 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libthai-0.1.29-1-any 210.8 KiB 473 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-pdcurses-4.3.1-1-any 196.4 KiB 407 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-glib-networking-2.70.1-... 180.0 KiB 199 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-libproxy-0.4.17-3-any 114.5 KiB 189 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-graphite2-1.3.14-2-any 147.3 KiB 210 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-giflib-5.2.1-3-any 131.5 KiB 200 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-icu-69.1-1-any 20.9 MiB 378 KiB/s 00:57 [#######################################] 100%
mingw-w64-i686-lzo2-2.10-2-any 95.4 KiB 300 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-cantarell-fonts-0.303.1... 112.9 KiB 335 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-docbook-xml-1~4.5-2-any 86.3 KiB 199 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-fribidi-1.0.11-1-any 82.4 KiB 202 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-jbigkit-2.1-4-any 79.0 KiB 232 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libdatrie-0.2.13-1-any 78.5 KiB 238 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-libdeflate-1.8-2-any 70.8 KiB 162 KiB/s 00:00 [#######################################] 100%
mingw-w64-i686-gtk-update-icon-cache-3... 24.4 KiB 25.0 KiB/s 00:01 [#######################################] 100%
mingw-w64-i686-hicolor-icon-theme-0.17... 18.1 KiB 20.8 KiB/s 00:01 [#######################################] 100%
Total (50/50) 105.5 MiB 1866 KiB/s 00:58 [#######################################] 100%
(50/50) checking keys in keyring [#######################################] 100%
(50/50) checking package integrity [#######################################] 100%
(50/50) loading package files [#######################################] 100%
(50/50) checking for file conflicts [#######################################] 100%
(50/50) checking available disk space [#######################################] 100%
:: Processing package changes...
( 1/50) installing mingw-w64-i686-icu [#######################################] 100%
( 2/50) installing mingw-w64-i686-boost [#######################################] 100%
( 3/50) installing mingw-w64-i686-hicolor-icon-theme [#######################################] 100%
( 4/50) installing mingw-w64-i686-glib2 [#######################################] 100%
( 5/50) installing mingw-w64-i686-libjpeg-turbo [#######################################] 100%
( 6/50) installing mingw-w64-i686-libpng [#######################################] 100%
( 7/50) installing mingw-w64-i686-jbigkit [#######################################] 100%
( 8/50) installing mingw-w64-i686-lerc [#######################################] 100%
( 9/50) installing mingw-w64-i686-libdeflate [#######################################] 100%
(10/50) installing mingw-w64-i686-giflib [#######################################] 100%
(11/50) installing mingw-w64-i686-libwebp [#######################################] 100%
(12/50) installing mingw-w64-i686-libtiff [#######################################] 100%
(13/50) installing mingw-w64-i686-gdk-pixbuf2 [#######################################] 100%
(14/50) installing mingw-w64-i686-graphite2 [#######################################] 100%
(15/50) installing mingw-w64-i686-harfbuzz [#######################################] 100%
Optional dependencies for mingw-w64-i686-harfbuzz
mingw-w64-i686-icu: harfbuzz-icu support [installed]
mingw-w64-i686-cairo: hb-view program [pending]
(16/50) installing mingw-w64-i686-freetype [#######################################] 100%
(17/50) installing mingw-w64-i686-fontconfig [#######################################] 100%
Fontconfig configuration is done via /mingw32/etc/fonts/conf.avail and conf.d.
Read /mingw32/etc/fonts/conf.d/README for more information.
updating font cache... done.
(18/50) installing mingw-w64-i686-lzo2 [#######################################] 100%
(19/50) installing mingw-w64-i686-pixman [#######################################] 100%
(20/50) installing mingw-w64-i686-cairo [#######################################] 100%
Optional dependencies for mingw-w64-i686-cairo
mingw-w64-i686-glib2: libcairo-gobject [installed]
(21/50) installing mingw-w64-i686-fribidi [#######################################] 100%
(22/50) installing mingw-w64-i686-libdatrie [#######################################] 100%
(23/50) installing mingw-w64-i686-libthai [#######################################] 100%
(24/50) installing mingw-w64-i686-pango [#######################################] 100%
(25/50) installing mingw-w64-i686-librsvg [#######################################] 100%
Optional dependencies for mingw-w64-i686-librsvg
mingw-w64-i686-gtk3: for rsvg-view-3 [pending]
(26/50) installing mingw-w64-i686-adwaita-icon-theme [#######################################] 100%
error: command (/usr/bin/bash /usr/bin/bash -c . /tmp/alpm_3Ge8XU/.INSTALL; post_install 41.0-1 ) failed to execute correctly
(27/50) installing mingw-w64-i686-atk [#######################################] 100%
(28/50) installing mingw-w64-i686-json-glib [#######################################] 100%
(29/50) installing mingw-w64-i686-libepoxy [#######################################] 100%
(30/50) installing mingw-w64-i686-shared-mime-info [#######################################] 100%
(31/50) installing mingw-w64-i686-gtk-update-icon-cache [#######################################] 100%
(32/50) installing mingw-w64-i686-gtk3 [#######################################] 100%
(33/50) installing mingw-w64-i686-iso-codes [#######################################] 100%
(34/50) installing mingw-w64-i686-libmariadbclient [#######################################] 100%
(35/50) installing mingw-w64-i686-gnutls [#######################################] 100%
(36/50) installing mingw-w64-i686-libproxy [#######################################] 100%
(37/50) installing mingw-w64-i686-adobe-source-code-pro-fonts [#######################################] 100%
(38/50) installing mingw-w64-i686-cantarell-fonts [#######################################] 100%
(39/50) installing mingw-w64-i686-gsettings-desktop-schemas [#######################################] 100%
(40/50) installing mingw-w64-i686-glib-networking [#######################################] 100%
(41/50) installing mingw-w64-i686-libsoup [#######################################] 100%
(42/50) installing mingw-w64-i686-libgpg-error [#######################################] 100%
(43/50) installing mingw-w64-i686-libgcrypt [#######################################] 100%
(44/50) installing mingw-w64-i686-libxslt [#######################################] 100%
(45/50) installing winpty [#######################################] 100%
(46/50) installing mingw-w64-i686-postgresql [#######################################] 100%
(47/50) installing mingw-w64-i686-ninja [#######################################] 100%
(48/50) installing mingw-w64-i686-pdcurses [#######################################] 100%
(49/50) installing mingw-w64-i686-docbook-xml [#######################################] 100%
(50/50) installing mingw-w64-i686-docbook-xsl [###########################################] 100%
:: Running post-transaction hooks...
(1/6) Updating fontconfig cache...
(2/6) Probing GDK-Pixbuf loader modules...
(3/6) Updating GIO module cache...
(4/6) Compiling GSettings XML schema files...
(5/6) Updating icon theme caches...
(6/6) Updating the MIME type database...
Note that 'E:/Data/GnuCash/gcdev64/msys2/mingw32/share' is not in the search path
set by the XDG_DATA_HOME and XDG_DATA_DIRS
environment variables, so applications may not
be able to find it until you set them. The
directories currently searched are:
- E:\Data\GnuCash\gcdev64\msys2\home\goodc\.local\share
- /usr/local/share/
- /usr/share/
Next we'll install the HTML Help Workshop includes and libraries into our MinGW directory.
get-item : Cannot find path 'HKCU:\SOFTWARE\Microsoft\HTML Help Workshop' because it does not exist.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:300 char:18
+ ... talled_hh = get-item -path "hkcu:\SOFTWARE\Microsoft\HTML Help Worksh ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (HKCU:\SOFTWARE\...L Help Workshop:String) [Get-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
****** ERROR ****
There was an error installing HTML Help Workshop. This will prevent building the documentation. If you didn't before, run setup-mingw64.ps1 in a PowerShell instance with Administrative priviledge. If you did that already, you may need to install HTML Help Workshop by hand.
****************
HTML Help Workshop isn't correctly installed.
Clone the gnucash-on-windows repository into the target source directory, patch jhbuild to disable its DESTDIR dance and set up jhbuildrc with our prefixes.
Directory: E:\Data\GnuCash\gcdev64
Mode LastWriteTime Length Name
---- ------------- ------ ----
d----- 17/01/2022 11:11 AM src
Cloning into '/e/Data/GnuCash/gcdev64/src/gnucash-on-windows.git'...
remote: Enumerating objects: 4730, done.
remote: Counting objects: 100% (204/204), done.
remote: Compressing objects: 100% (135/135), done.
remote: Total 4730 (delta 121), reused 145 (delta 69), pack-reused 4526
Receiving objects: 100% (4730/4730), 1.70 MiB | 2.16 MiB/s, done.
Resolving deltas: 100% (3183/3183), done.
Cloning into '/e/Data/GnuCash/gcdev64/src/jhbuild.git'...
warning: redirecting to https://gitlab.gnome.org/GNOME/jhbuild.git/
remote: Enumerating objects: 53797, done.
remote: Counting objects: 100% (125/125), done.
remote: Compressing objects: 100% (73/73), done.
remote: Total 53797 (delta 79), reused 96 (delta 52), pack-reused 53672
Receiving objects: 100% (53797/53797), 13.76 MiB | 3.13 MiB/s, done.
Resolving deltas: 100% (41418/41418), done.
patching file jhbuild/modtypes/__init__.py
patching file jhbuild/modtypes/cmake.py
patching file jhbuild/utils/systeminstall.py
Your build environment is now ready to use. Open an MSys2/mingw32 shell from the start menu, cd to /e/Data/GnuCash/gcdev64, and run
jhbuild -f src/gnucash-on-windows.git/jhbuildrc build
Note that the build will not work with the plain MSys2 shell!
PS E:\data\GnuCash\gcdev64>
20220117_2 Setup-ming64.ps1.txt
(text/plain, 15.1 KB)
After I manually downloaded mingw-w64-i686-webkitgtk3-2.4.11-999.4-any.pkg.tar.zst.sig and put it in
gcdev64\msys2\var\cache\pacman\pkg to fix error: Maximum file size exceeded
See https://github.com/msys2/MSYS2-packages/issues/942
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\Users\goodc> e:
PS E:\> cd .\data\GnuCash\gcdev64\
PS E:\data\GnuCash\gcdev64> .\setup-mingw64.ps1 -target_dir e:\Data\GnuCash\gcdev64
target_dir=e:\Data\GnuCash\gcdev64
download_dir=e:\Data\GnuCash\gcdev64\\downloads
msys2_root=e:\Data\GnuCash\gcdev64\\msys2
x86_64=False
preferred_mirror=http://repo.msys2.org
get-item : Cannot find path 'HKCU:\SOFTWARE\Microsoft\HTML Help Workshop' because it does not exist.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:205 char:17
+ ... talled_hh = get-item -path "hkcu:\SOFTWARE\Microsoft\HTML Help Worksh ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (HKCU:\SOFTWARE\...L Help Workshop:String) [Get-Item], ItemNotFoundExcep
tion
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
Downloading e:\Data\GnuCash\gcdev64\\downloads\htmlhelp.exe from http://download.microsoft.com/download/0/a/9/0a939ef6-e31c-430f-a3df-dfae7960d564/htmlhelp.exe
Exception calling "DownloadFile" with "2" argument(s): "The remote server returned an error: (404) Not Found."
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:119 char:2
+ (New-Object System.Net.WebClient).DownloadFile($url, "$download_f ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : WebException
Installing e:\Data\GnuCash\gcdev64\\downloads\htmlhelp.exe
Exception calling "Start" with "1" argument(s): "The system cannot find the file specified"
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:126 char:5
+ $proc = [Diagnostics.Process]::Start($psi)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : Win32Exception
You cannot call a method on a null-valued expression.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:127 char:5
+ $proc.waitForExit()
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Updating the installation. Accept the proposed changes. If the window doesn't close on its own then close it and re-run the script when it finishes.
:: Synchronizing package databases...
mingw32 1431.7 KiB 733 KiB/s 00:02 [#######################################] 100%
mingw64 1438.6 KiB 501 KiB/s 00:03 [#######################################] 100%
ucrt64 1571.7 KiB 672 KiB/s 00:02 [#######################################] 100%
clang64 1479.8 KiB 467 KiB/s 00:03 [#######################################] 100%
msys 372.7 KiB 178 KiB/s 00:02 [#######################################] 100%
:: Starting core system upgrade...
there is nothing to do
:: Starting full system upgrade...
:: Replace autoconf with msys/autoconf-wrapper? [Y/n]
:: Replace pkg-config with msys/pkgconf? [Y/n]
resolving dependencies...
looking for conflicting packages...
Packages (4) autoconf-2.71-3 [removal] autoconf-wrapper-15-1 pkg-config-0.29.2-4 [removal] pkgconf-1.8.0-1
Total Installed Size: 0.31 MiB
Net Upgrade Size: -2.45 MiB
:: Proceed with installation? [Y/n]
(2/2) checking keys in keyring [#######################################] 100%
(2/2) checking package integrity [#######################################] 100%
(2/2) loading package files [#######################################] 100%
(2/2) checking for file conflicts [#######################################] 100%
(4/4) checking available disk space [#######################################] 100%
:: Running pre-transaction hooks...
(1/1) Removing old entries from the info directory file...
:: Processing package changes...
(1/2) removing pkg-config [#######################################] 100%
(2/2) removing autoconf [#######################################] 100%
(1/2) installing autoconf-wrapper [#######################################] 100%
(2/2) installing pkgconf [#######################################] 100%
:: Synchronizing package databases...
mingw32 1431.7 KiB 791 KiB/s 00:02 [#######################################] 100%
mingw64 1438.6 KiB 513 KiB/s 00:03 [#######################################] 100%
ucrt64 1571.7 KiB 722 KiB/s 00:02 [#######################################] 100%
clang64 1479.8 KiB 823 KiB/s 00:02 [#######################################] 100%
msys 372.7 KiB 304 KiB/s 00:01 [#######################################] 100%
:: Starting core system upgrade...
there is nothing to do
:: Starting full system upgrade...
there is nothing to do
warning: asciidoc-9.1.1-1 is up to date -- skipping
warning: autoconf2.13-2.13-5 is up to date -- skipping
warning: autogen-5.18.16-3 is up to date -- skipping
warning: automake-wrapper-11-4 is up to date -- skipping
warning: bison-3.8.2-2 is up to date -- skipping
warning: diffstat-1.64-1 is up to date -- skipping
warning: diffutils-3.8-2 is up to date -- skipping
warning: dos2unix-7.4.2-1 is up to date -- skipping
warning: file-5.41-2 is up to date -- skipping
warning: flex-2.6.4-2 is up to date -- skipping
warning: gawk-5.1.0-2 is up to date -- skipping
warning: gettext-0.21-1 is up to date -- skipping
warning: gettext-devel-0.21-1 is up to date -- skipping
warning: gperf-3.1-3 is up to date -- skipping
warning: grep-1~3.0-3 is up to date -- skipping
warning: groff-1.22.4-2 is up to date -- skipping
warning: intltool-0.51.0-2 is up to date -- skipping
warning: libtool-2.4.6-14 is up to date -- skipping
warning: m4-1.4.19-2 is up to date -- skipping
warning: make-4.3-3 is up to date -- skipping
warning: man-db-2.9.4-1 is up to date -- skipping
warning: pacman-6.0.1-9 is up to date -- skipping
warning: pactoys-r55.8860e1f-1 is up to date -- skipping
warning: patch-2.7.6-1 is up to date -- skipping
warning: patchutils-0.4.2-2 is up to date -- skipping
warning: perl-5.32.1-2 is up to date -- skipping
warning: python-3.9.9-2 is up to date -- skipping
warning: rsync-3.2.3-2 is up to date -- skipping
warning: sed-4.8-2 is up to date -- skipping
warning: texinfo-6.8-3 is up to date -- skipping
warning: texinfo-tex-6.8-3 is up to date -- skipping
warning: wget-1.21.2-1 is up to date -- skipping
warning: xmlto-0.0.28-2 is up to date -- skipping
warning: git-2.34.1-1 is up to date -- skipping
warning: texinfo-6.8-3 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
:: autoconf and autoconf-wrapper are in conflict. Remove autoconf-wrapper? [Y/n]
:: pkg-config and pkgconf are in conflict. Remove pkgconf? [Y/n]
Packages (4) autoconf-wrapper-15-1 [removal] pkgconf-1.8.0-1 [removal] autoconf-2.71-3 pkg-config-0.29.2-4
Total Installed Size: 2.76 MiB
Net Upgrade Size: 2.45 MiB
:: Proceed with installation? [Y/n]
(2/2) checking keys in keyring [#######################################] 100%
(2/2) checking package integrity [#######################################] 100%
(2/2) loading package files [#######################################] 100%
(2/2) checking for file conflicts [#######################################] 100%
(4/4) checking available disk space [#######################################] 100%
:: Processing package changes...
(1/2) removing pkgconf [#######################################] 100%
(2/2) removing autoconf-wrapper [#######################################] 100%
(1/2) installing autoconf [#######################################] 100%
(2/2) installing pkg-config [#######################################] 100%
:: Running post-transaction hooks...
(1/1) Updating the info directory file...
warning: mingw-w64-i686-binutils-2.37-4 is up to date -- skipping
warning: mingw-w64-i686-cmake-3.22.1-1 is up to date -- skipping
warning: mingw-w64-i686-crt-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-gcc-11.2.0-6 is up to date -- skipping
warning: mingw-w64-i686-gcc-libs-11.2.0-6 is up to date -- skipping
warning: mingw-w64-i686-gdb-11.1-2 is up to date -- skipping
warning: mingw-w64-i686-headers-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-libmangle-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-libltdl-2.4.6-21 is up to date -- skipping
warning: mingw-w64-i686-libwinpthread-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-make-4.3-1 is up to date -- skipping
warning: mingw-w64-i686-swig-4.0.2-3 is up to date -- skipping
warning: mingw-w64-i686-tools-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
warning: mingw-w64-i686-winpthreads-git-9.0.0.6373.5be8fcd83-1 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
:: mingw-w64-i686-pkg-config and mingw-w64-i686-pkgconf are in conflict. Remove mingw-w64-i686-pkgconf? [Y/n]
error: failed to prepare transaction (could not satisfy dependencies)
:: removing mingw-w64-i686-pkgconf breaks dependency 'mingw-w64-i686-pkgconf' required by mingw-w64-i686-cmake
Now we'll install a pre-built webkitgtk3 package we've created and placed in the GnuCash project on SourceForge. It will install several more dependencies from Mingw-w64's repository.
--2022-01-17 18:49:31-- https://downloads.sourceforge.net/gnucash/Dependencies/jralls_public_signing_key.asc
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 204.68.111.105
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|204.68.111.105|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://versaweb.dl.sourceforge.net/project/gnucash/Dependencies/jralls_public_signing_key.asc [following]
--2022-01-17 18:49:32-- https://versaweb.dl.sourceforge.net/project/gnucash/Dependencies/jralls_public_signing_key.asc
Resolving versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)... 162.251.232.173
Connecting to versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)|162.251.232.173|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1806 (1.8K) [application/octet-stream]
Saving to: 'jralls_public_signing_key.asc'
jralls_public_signing_key.asc 100%[=================================================>] 1.76K --.-KB/s in 0s
2022-01-17 18:49:33 (420 MB/s) - 'jralls_public_signing_key.asc' saved [1806/1806]
==> Updating trust database...
gpg: next trustdb check due at 2022-06-26
-> Locally signed 1 keys.
==> Updating trust database...
gpg: next trustdb check due at 2022-06-26
loading packages...
resolving dependencies...
looking for conflicting packages...
Packages (1) mingw-w64-i686-webkitgtk3-2.4.11-999.4
Total Installed Size: 36.67 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [#######################################] 100%
(1/1) checking package integrity [#######################################] 100%
(1/1) loading package files [#######################################] 100%
(1/1) checking for file conflicts [#######################################] 100%
(1/1) checking available disk space [#######################################] 100%
:: Processing package changes...
(1/1) installing mingw-w64-i686-webkitgtk3 [#######################################] 100%
Now we'll install the dependencies. Accept the installation as usual. About half-way through it will stop with a message about fontconfig. Just type "Return" at it and it will resume after a minute or two (be patient!) and complete the installation.
warning: mingw-w64-i686-boost-1.78.0-1 is up to date -- skipping
warning: mingw-w64-i686-icu-69.1-1 is up to date -- skipping
warning: mingw-w64-i686-gtk3-3.24.31+56+g7e9935e381-1 is up to date -- skipping
warning: mingw-w64-i686-iso-codes-4.9.0-1 is up to date -- skipping
warning: mingw-w64-i686-shared-mime-info-2.1-4 is up to date -- skipping
warning: mingw-w64-i686-libmariadbclient-3.1.12-1 is up to date -- skipping
warning: mingw-w64-i686-libsoup-2.74.2-1 is up to date -- skipping
warning: mingw-w64-i686-libwebp-1.2.1-1 is up to date -- skipping
warning: mingw-w64-i686-postgresql-14.0-1 is up to date -- skipping
warning: mingw-w64-i686-ninja-1.10.2-3 is up to date -- skipping
warning: mingw-w64-i686-pdcurses-4.3.1-1 is up to date -- skipping
warning: mingw-w64-i686-sqlite3-3.37.2-1 is up to date -- skipping
warning: mingw-w64-i686-docbook-xsl-1.79.2-7 is up to date -- skipping
there is nothing to do
Next we'll install the HTML Help Workshop includes and libraries into our MinGW directory.
get-item : Cannot find path 'HKCU:\SOFTWARE\Microsoft\HTML Help Workshop' because it does not exist.
At E:\data\GnuCash\gcdev64\setup-mingw64.ps1:300 char:18
+ ... talled_hh = get-item -path "hkcu:\SOFTWARE\Microsoft\HTML Help Worksh ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (HKCU:\SOFTWARE\...L Help Workshop:String) [Get-Item], ItemNotFoundExcep
tion
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
****** ERROR ****
There was an error installing HTML Help Workshop. This will prevent building the documentation. If you didn't before, run setup-mingw64.ps1 in a PowerShell instance with Administrative priviledge. If you did that already, you may need to install HTML Help Workshop by hand.
****************
HTML Help Workshop isn't correctly installed.
Clone the gnucash-on-windows repository into the target source directory, patch jhbuild to disable its DESTDIR dance and set up jhbuildrc with our prefixes.
Your build environment is now ready to use. Open an MSys2/mingw32 shell from the start menu, cd to /e/Data/GnuCash/gcdev64, and run
jhbuild -f src/gnucash-on-windows.git/jhbuildrc build
Note that the build will not work with the plain MSys2 shell!
20220117_3 BuildWin32GnuCashErr.txt
(text/plain, 319.8 KB) - not displayed