Re: Re: working with nokia 9500

Yes, the sync is reported as complete on the phone side. (also on the
multisync side).

I have just tried syncing ONLY the contacts and the result is the
same...

Regards,

Michael

On Mon, 2005-01-03 at 14:09 +0100, Armin Bauer wrote:
> On Mon, 2005-01-03 at 13:56, Michael Marcelo Inniss wrote:
> > Hello,
> > 
> > I have exactly the same problem trying to sync between evolution2 and a
> > sony P910i. On the P910i, the progress bar goes up to 1/2 way and the
> > logs from multisync says  "dwelling" - both "freeze" (stop) at this
> > point. I did not attach my logs - they are the same as Pep submitted.
> > 
> > To continue, as Pep did I press Stop on the mobile phone side or [if I
> > press Sync on the multisync, the sync is completed, but all the entries
> > are duplicated in evolution].
> 
> 
> is that sync also reported "complete" on the phone side?
> 
> > 
> > I my example, I was trying to sync about 5 calendar entries and 20 tasks
> > (the contact sync was not selected) and the cpu load was not at all
> > high. I used the latest wbxml (patched) and the latest multisync Cvs
> > snapshot.
> 
> Can you please try to only sync contacts without calendar?
> 
> > 
> > I hope this helps - If still require the logs -  I can send them...
> > 
> > Regards,
> > 
> > Michael
> > 
> > 
> > On Mon, 2005-01-03 at 09:45 +0100, Armin Bauer wrote:
> > > On Mon, 2005-01-03 at 08:46, Pep Turró wrote:
> > > > Hi,
> > > > 
> > > > I can't sync evolution2 - nokia 9500 (syncml)... i found a message on
> > > > the archives saying it works, but I had no luck.
> > > > 
> > > > I followed the instructions about nokia 6600, compiled the patched
> > > > libwbxml and 0.8x cvs source. The sync apparently starts, and data is
> > > > exchanged... but the nokia like frozes when the progress bar half of
> > > > the way, saying "Syncing..." until I cancel. No crashes... everything
> > > > seems ok, but the sync never completes. I am attaching the debug
> > > > output produced by multisync.
> > > 
> > > What looks odd to me is the log message just before the freeze:
> > > "Dwelling..."
> > > 
> > > This means that multisync has finished the sync, saw some new changes
> > > and is waiting for more changes to arrive. Maybe the problem is just
> > > that multisync is not finishing the sync cleanly.
> > > 
> > > BTW:
> > > How many contacts are you syncing?
> > > What does your cpu load say while the sync freezes?
> > > 
> > > > 
> > > > Any help much appreciated, thanks.
> > > > 
> > > > pep
> > > 
> > > 
> > > 
> > > -------------------------------------------------------
> > > The SF.Net email is sponsored by: Beat the post-holiday blues
> > > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> > > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> > > _______________________________________________
> > > Multisync-users mailing list
> > > Multisync-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> > > https://lists.sourceforge.net/lists/listinfo/multisync-users
> > > 
> 
> 
> 
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Multisync-users mailing list
> Multisync-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/multisync-users
> 
-- 
Michael Marcelo Inniss <[email protected]>



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt