Re: Syncing Siemens SX1 (Nokia 6600)

Hey,

I'am now trying to get my new sx1 working together with gnubox V 1.0.
(The connection between the phone and linux via bluetooth works fine)
I used the version from leonards sx1 part of the howto: 
http://www.cs.helsinki.fi/u/mraento/symbian/gnubox.SIS
Another SX1 user reported this version works together with his mobile (he
has SVN 11)
http://www.unix-ag.uni-kl.de/~leonard/gnubox6600.SIS does not starts on my
phone.

I have the firmware SVN 13 (SX1_o2-D-MUSIC-uk-de-tr_13_0002).
This is a special O2 branded version (SX1 - O2 Music)

I created the new "Bt" Access-Point with an arbitray telephone number and
gsm-data etc as described in the docs.
But after running gnubox the phonenumber is still visible in the AP-Settings
of the phone. It shouldn't.
(Gnubox shows the correct phone number after starting)
If I use putty with the Bt profile to connect to my linux box, sometimes
the phone dials the number from the Bt Access-Point and sometimes gives me
an error Message (-1).
I never get a connection ...

Can someone give me a hint?
This would be very nice.

Best regards,
Thomas.


Here is a part of the log from gnubox:

22.01.2005      14.20.02        CGnuboxContainer::Draw^M
22.01.2005      14.20.07        CGnuboxContainer::Draw^M
22.01.2005      14.20.10        **** CGnuboxContainer::UpdateCommDbL ****^M
22.01.2005      14.20.11        CGnuboxContainer::SelectBluetoothDevice^M
22.01.2005      14.20.13        Failed to select BT^M
22.01.2005      14.20.13        Updated CommDB^M
22.01.2005      14.20.13        CGnuboxContainer::Draw^M
22.01.2005      14.20.17        **** CGnuboxContainer::UpdateCommDbL ****^M
22.01.2005      14.20.17        CGnuboxContainer::SelectBluetoothDevice^M
22.01.2005      14.20.20        BTCOMM CSY Configured.^M
22.01.2005      14.20.21        Updating ISP^M
22.01.2005      14.20.21        Updating modem^M
22.01.2005      14.20.21        Updated CommDB^M
22.01.2005      14.20.21        CGnuboxContainer::SetScreenTextL^M
22.01.2005      14.20.21        CGnuboxAOLoader::Fire - invoke the one shot
active object^M
22.01.2005      14.20.21        CGnuboxContainer::Draw^M
22.01.2005      14.20.21        CGnuboxAOLoader::RunL - start loading
CommDB^M
22.01.2005      14.20.21        **** CGnuboxContainer::LoadCommDbSettingsL
****^M
22.01.2005      14.20.21          ==== CGnuboxDocument::StoreRecordL Mode 3
==== .^M
22.01.2005      14.20.21        CGnuboxContainer::Draw^M
22.01.2005      14.20.28        CGnuboxContainer::~CGnuboxContainer^M
22.01.2005      14.20.35        **** CGnuboxDocument::NewL() ****^M
22.01.2005      14.20.35        **** CGnuboxDocument::ConstructL ****^M
22.01.2005      14.20.35          ==== CGnuboxDocument::RetrieveRecordL Mode
==== .^M
22.01.2005      14.20.35        CGnuboxContainer::ConstructL^M
22.01.2005      14.20.35        CGnuboxContainer::SetScreenTextL^M
22.01.2005      14.20.35        CGnuboxAOLoader::Fire - invoke the one shot
active object^M
22.01.2005      14.20.35        CGnuboxContainer::SizeChanged^M
22.01.2005      14.20.35        CGnuboxContainer::Draw^M
22.01.2005      14.20.35        CGnuboxAOLoader::RunL - start loading
CommDB^M
22.01.2005      14.20.35        **** CGnuboxContainer::LoadCommDbSettingsL
****^M
22.01.2005      14.20.35          ==== CGnuboxDocument::StoreRecordL Mode 3
==== .^M
22.01.2005      14.20.36        CGnuboxContainer::Draw^M
22.01.2005      14.20.37        CGnuboxContainer::~CGnuboxContainer^M

The ppp connection between linux and the phone works well and i can ping my
phone.

Jan 22 14:41:29 localhost dund[3091]: New connection from 00:01:VV:3C:VV:4D
Jan 22 14:41:30 localhost pppd[3092]: pppd 2.4.2 started by , uid 0
Jan 22 14:41:30 localhost pppd[3092]: Using interface ppp0
Jan 22 14:41:30 localhost pppd[3092]: Connect: ppp0 <--> /dev/rfcomm0
Jan 22 14:41:36 localhost pppd[3092]: Cannot determine ethernet address for
proxy ARP
Jan 22 14:41:36 localhost pppd[3092]: local  IP address 192.168.1.1
Jan 22 14:41:36 localhost pppd[3092]: remote IP address 192.168.3.1
Jan 22 14:41:39 localhost kernel: device ppp0 entered promiscuous mode
Jan 22 14:56:18 localhost pppd[3092]: Terminating on signal 2.
Jan 22 14:56:18 localhost kernel: device ppp0 left promiscuous mode
Jan 22 14:56:24 localhost pppd[3092]: Connection terminated.
Jan 22 14:56:24 localhost pppd[3092]: Connect time 14.8 minutes.
Jan 22 14:56:24 localhost pppd[3092]: Sent 960 bytes, received 950 bytes.
Jan 22 14:56:24 localhost pppd[3092]: Hangup (SIGHUP)
Jan 22 14:56:24 localhost pppd[3092]: Exit.



-- 
Sparen beginnt mit GMX DSL: http://www.gmx.net/de/go/dsl


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl