Re: can't sync with Tungsten T2
Callum Macdonald <[email protected]>
| Newsgroups | gmane.comp.gnome.apps.pilot |
|---|---|
| Message-ID | <[email protected]> |
I've heard lots of people say that the cables cause problems. I don't think it's the physical cable that causes the issue, but syncing over usb that is unreliable. I know I can't get my Treo 680 to sync via the cable (or at best it's very intermittent) but it works over bluetooth pretty reliably (bar the timezone issue!). Can you try a sync via bluetooth? Or over the network somehow? You might have more luck. I've no idea what causes the issues over the cable, but others on the list will know more than me. Cheers - Callum. daz wrote: > I found Bug #66355 "gpilotd locks up my Palm Z22" and (after installing > pilot-xfer) have tried > > daz@daz-laptop:~$ pilot-xfer -p /dev/pilot -l > > Listening for incoming connection on /dev/pilot... > > But nothing happens..... > I don't think that its the cable, as the charging light is on, > and /dev/pilot is definitely created when I hit the hotsync button. > > Darren > > > On Sun, 2007-08-19 at 09:02 +1000, daz wrote: > >> I removed the applet, ran a killall gpilotd, started gpilotd manually, >> then hit the hotsync button: >> >> daz@daz-laptop:~$ /usr/bin/gpilotd >> gpilotd-Message: gnome-pilot 2.0.15 starting... >> gpilotd-Message: compiled for pilot-link version 0.12.1 >> gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] >> gpilotd-Message: Activating CORBA server >> gpilotd-Message: bonobo_activation_active_server_register = 0 >> gpilotd-Message: Watching Cradle (/dev/pilot) >> gpilotd-Message: Found 4766, 0001 >> gpilotd-Message: Using net TRUE >> gpilotd-Message: Found 0502, 0736 >> gpilotd-Message: Using net TRUE >> gpilotd-Message: Found 091e, 0004 >> gpilotd-Message: Using net TRUE >> >> ........lots of these then, >> >> gpilotd-Message: Using net TRUE >> gpilotd-Message: Found 12ef, 0100 >> gpilotd-Message: Using net TRUE >> gpilotd-Message: setting PILOTRATE=57600 >> >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to returned -202: >> Resource temporarily unavailable >> >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to: timeout was 2 >> secs >> >> Then I disconnected the PDA: >> >> gpilotd-Message: Client seems ok >> gpilotd-Message: Client seems ok >> gpilotd-Message: monitor_on(pilot_name="PalmT5",client_id = >> IOR:010000001b000000...) >> gpilotd-Message: corba: >> notify_on(event_type=CONNECT,callback=IOR:010000001b000000...) >> gpilotd-Message: corba: >> notify_on(event_type=DISCONNECT,callback=IOR:010000001b000000...) >> gpilotd-Message: Shutting down devices >> gpilotd-Message: Rereading configuration... >> gpilotd-Message: Watching Cradle (/dev/pilot) >> >> Now I disable all the conduits and hit the hotsync button: >> >> gpilotd-Message: setting PILOTRATE=57600 >> >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to returned -202: >> Resource temporarily unavailable >> >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to: timeout was 2 >> secs >> >> Now its frozen again and I'm not getting the same stuff as above when I >> disconnect the PDA (dunno what happened there...). >> >> >> >> >> >> On Sat, 2007-08-18 at 18:34 +0100, Matt Davey wrote: >> >>>> I've just recently installed Ubuntu 7.04 from a downloaded CD image. >>>> I'm running on an IBM A31 laptop. >>>> Gnome-Pilot-Applet is 2.0.15 >>>> >>>> I've been unable to sync my Palm Tungsten T2 via the USB port. It just >>>> freezes completely and requires a soft reset to come back to life (even >>>> the light that indicates that its charging stays on!). >>>> >>> Have you downloaded all available updates for your Ubuntu installation? >>> There are several bugs this could be, including: >>> https://launchpad.net/ubuntu/+source/gnome-pilot/+bug/19528 >>> >>> As suggested, you can run gpilotd in a terminal to get more >>> information about where it crashes. My guess is that it is >>> crashing in the Evolution calendar conduit. If you're not >>> sure, try disabling all the conduits and see if you can sync. >>> If that works, try re-enabling them one at a time to narrow >>> it down. >>> >>> Matt >>> _______________________________________________ >>> gnome-pilot-list mailing list >>> [email protected] >>> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list >>> >>> >> _______________________________________________ >> gnome-pilot-list mailing list >> [email protected] >> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list >> >> > > _______________________________________________ > gnome-pilot-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/gnome-pilot-list > > >