Re: can't sync with Tungsten T2
daz <[email protected]>
| Newsgroups | gmane.comp.gnome.apps.pilot |
|---|---|
| Message-ID | <1187604798.5857.53.camel@daz-laptop> |
Major breakthrough. It syncs successfully through ttyUSB0 every time. Yee Haa. I had read somewhere that it always gets 2 connections and always uses the odd numbered tty's for the sync and as a consequence I never tried 0. Thanks for your responses. Now, if you're game I'd like to get it to work with bluetooth. When I try that I get the message on the palm: "Unable to initiate HotSync operation because the port is in use by another application". Any ideas? Thanks again, Darren On Sun, 2007-08-19 at 15:20 +0100, Matt Davey wrote: > > I've heard lots of people say that the cables cause problems. I don't > > think it's the physical cable that causes the issue, but syncing over > > usb that is unreliable. I know I can't get my Treo 680 to sync via the > > cable (or at best it's very intermittent) but it works over bluetooth > > pretty reliably (bar the timezone issue!). > > > > Can you try a sync via bluetooth? Or over the network somehow? You might > > have more luck. I've no idea what causes the issues over the cable, but > > others on the list will know more than me. > > > > Cheers - Callum. > > > > daz wrote: > > > I found Bug #66355 "gpilotd locks up my Palm Z22" and (after installing > > > pilot-xfer) have tried > > > > > > daz@daz-laptop:~$ pilot-xfer -p /dev/pilot -l > > > > > > Listening for incoming connection on /dev/pilot... > > > > > > But nothing happens..... > > > I don't think that its the cable, as the charging light is on, > > > and /dev/pilot is definitely created when I hit the hotsync button. > > One thing worth checking is whether /dev/pilot is getting linked > to the right ttyUSB device. Usually /dev/pilot does the right thing, > but given that you are getting a "-202" aka "timeout" error from > pilot-link, I would try replacing "/dev/pilot" with both "/dev/ttyUSB0" > and "/dev/ttyUSB1". You can also try with "pilot-xfer -p /dev/ttyUSB0 -l". > > Your sync is not getting as far as connecting to the T2, so your > immediate problem doesn't seem to lie with the conduits. > > Matt > > > > > > > Darren > > > > > > > > > On Sun, 2007-08-19 at 09:02 +1000, daz wrote: > > > > > >> I removed the applet, ran a killall gpilotd, started gpilotd manually, > > >> then hit the hotsync button: > > >> > > >> daz@daz-laptop:~$ /usr/bin/gpilotd > > >> gpilotd-Message: gnome-pilot 2.0.15 starting... > > >> gpilotd-Message: compiled for pilot-link version 0.12.1 > > >> gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] > > >> gpilotd-Message: Activating CORBA server > > >> gpilotd-Message: bonobo_activation_active_server_register = 0 > > >> gpilotd-Message: Watching Cradle (/dev/pilot) > > >> gpilotd-Message: Found 4766, 0001 > > >> gpilotd-Message: Using net TRUE > > >> gpilotd-Message: Found 0502, 0736 > > >> gpilotd-Message: Using net TRUE > > >> gpilotd-Message: Found 091e, 0004 > > >> gpilotd-Message: Using net TRUE > > >> > > >> ........lots of these then, > > >> > > >> gpilotd-Message: Using net TRUE > > >> gpilotd-Message: Found 12ef, 0100 > > >> gpilotd-Message: Using net TRUE > > >> gpilotd-Message: setting PILOTRATE=57600 > > >> > > >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to returned -202: > > >> Resource temporarily unavailable > > >> > > >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to: timeout was 2 > > >> secs > > >> > > >> Then I disconnected the PDA: > > >> > > >> gpilotd-Message: Client seems ok > > >> gpilotd-Message: Client seems ok > > >> gpilotd-Message: monitor_on(pilot_name="PalmT5",client_id = > > >> IOR:010000001b000000...) > > >> gpilotd-Message: corba: > > >> notify_on(event_type=CONNECT,callback=IOR:010000001b000000...) > > >> gpilotd-Message: corba: > > >> notify_on(event_type=DISCONNECT,callback=IOR:010000001b000000...) > > >> gpilotd-Message: Shutting down devices > > >> gpilotd-Message: Rereading configuration... > > >> gpilotd-Message: Watching Cradle (/dev/pilot) > > >> > > >> Now I disable all the conduits and hit the hotsync button: > > >> > > >> gpilotd-Message: setting PILOTRATE=57600 > > >> > > >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to returned -202: > > >> Resource temporarily unavailable > > >> > > >> (gnome-pilot:29864): gpilotd-WARNING **: pi_accept_to: timeout was 2 > > >> secs > > >> > > >> Now its frozen again and I'm not getting the same stuff as above when I > > >> disconnect the PDA (dunno what happened there...). > > >> > > >> > > >> > > >> > > >> > > >> On Sat, 2007-08-18 at 18:34 +0100, Matt Davey wrote: > > >> > > >>>> I've just recently installed Ubuntu 7.04 from a downloaded CD image. > > >>>> I'm running on an IBM A31 laptop. > > >>>> Gnome-Pilot-Applet is 2.0.15 > > >>>> > > >>>> I've been unable to sync my Palm Tungsten T2 via the USB port. It just > > >>>> freezes completely and requires a soft reset to come back to life (even > > >>>> the light that indicates that its charging stays on!). > > >>>> > > >>> Have you downloaded all available updates for your Ubuntu installation? > > >>> There are several bugs this could be, including: > > >>> https://launchpad.net/ubuntu/+source/gnome-pilot/+bug/19528 > > >>> > > >>> As suggested, you can run gpilotd in a terminal to get more > > >>> information about where it crashes. My guess is that it is > > >>> crashing in the Evolution calendar conduit. If you're not > > >>> sure, try disabling all the conduits and see if you can sync. > > >>> If that works, try re-enabling them one at a time to narrow > > >>> it down. > > >>> > > >>> Matt > > >>> _______________________________________________ > > >>> gnome-pilot-list mailing list > > >>> [email protected] > > >>> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list > > >>> > > >>> > > >> _______________________________________________ > > >> gnome-pilot-list mailing list > > >> [email protected] > > >> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list > > >> > > >> > > > > > > _______________________________________________ > > > gnome-pilot-list mailing list > > > [email protected] > > > http://mail.gnome.org/mailman/listinfo/gnome-pilot-list > > > > > > > > > > > > > _______________________________________________ > > gnome-pilot-list mailing list > > [email protected] > > http://mail.gnome.org/mailman/listinfo/gnome-pilot-list > > > > > _______________________________________________ > gnome-pilot-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/gnome-pilot-list >